SVOBODA, Ladislav; VILAMOVÁ, Zuzana; PRAUS, Petr; NOVÁK, Vlastimil; MAMULOVÁ KUTLÁKOVÁ, Kateřina; PETR, Martin; BEDNÁŘ, Jiří; JOCHIM, Vít; ŠIMONOVÁ, Zuzana and DVORSKÝ, Richard. Optimization of the Urbach energy and charge carrier dynamics in g-C3N4 through strategic potassium precursor selection: Insights and challenges. Online.
Applied Surface Science. 2025, Vol. 679, no. January. ISSN 0169-4332. Available from:
https://www.sciencedirect.com/science/article/pii/S0169433224018762?via%3Dihub.
Detail BERNARDO, Leandro B; VIEIRA, Leandro A; BORGES, Caio V. N; BUITRAGO, Pedro A. G; KUČA, Kamil; FRANCA, Tanos C. C; CAVALCANTE, Samir F. A; SOUSA, Roberto B; LIMA, Antonio L. S and KITAGAWA, Daniel A. S. In silico studies and in vitro evaluation of isatin-pyridine oxime hybrids as novel reactivators of acetylcholinesterase inhibited by an A-230 surrogate. Online.
Archives of Toxicology. 2025, Vol. 99, no. 04 th March 2025. ISSN 0340-5761. Available from:
https://link.springer.com/article/10.1007/s00204-025-03976-7.
Detail RICKA, Rudolf; WANAG, Agnieszka; KUSIAK-NEJMAN, Ewelina; FILIP EDELMANNOVÁ, Miroslava; RELI, Martin; ŁAPINSKI, Marcin; SŁOWIK, Grzegorz; MORAWSKI, Antoni W. and KOČÍ, Kamila. Defective TiO2 for CO2 photoreduction: Influence of alkaline agent and reduction temperature modulation. Online.
Catalysis Today. 2025, Vol. 448, no. March. ISSN 0920-5861. Available from:
https://www.sciencedirect.com/science/article/pii/S0920586124006564.
Detail WANG, Yingbin; LI, Xinhao; MIAO, Wenjuan; SU, Ying; HE, Xingyang and STRNADEL, Bohumír. The carbon mineralization behavior of copper slag and its impact on pozzolanic reactivity.
Cement and Concrete Composites. 2025, Vol. 157, no. March 2025. ISSN 0958-9465.
Detail ZENG, Jingyi; YANG, Jin; HE, Xingyang; SU, Ying and LIU, Qiao. Controllable and scalable preparation of green nucleation seeding accelerator for cement with inert waste stone chips: Role of amorphization.
Ceramics International. 2025, Vol. 51, no. 12, p. 15107-15122. ISSN 0272-8842.
Detail KONWAR, Subhrajit; KUMAR, Sushant; MOHAMAD, Ahmad Azmin; JAIN, Amrita; MICHALSKA, Monika Kinga; PUNETHA, Vinay Deep; YAHYA, M. Z. A.; STRZALKOWSKI, Karol; SINGH, Diksha; DIANTORO, Markus; CHOWDHURY, Faisal Islam and SINGH, Pramod K.. Ionic liquid (1-Ethyl-3-methylimidazolium tricyanomethanide) incorporated corn starch polymer electrolyte for solar cell and supercapacitor application. Online.
Chemical Physics Impact. 2025, Vol. 10, no. June, p. 100780. ISSN 2667-0224. Available from:
https://www.sciencedirect.com/science/article/pii/S2667022424003244?via%3Dihub.
Detail JOMOVA, Klaudia; ALOMAR, Suliman Y; VALKO, Richard; LISKA, Jan; NEPOVIMOVA, Eugenie; KUČA, Kamil and VALKO, Marian. Flavonoids and their role in oxidative stress, inflammation, and human diseases. Online.
Chemico-Biological Interactions. 2025, Vol. 413, no. May 2025. ISSN 0009-2797. Available from:
https://www.sciencedirect.com/science/article/pii/S000927972500119X.
Detail ZHENG, Zhengqi; TAN, Hongbo; ZENG, Jingyi; YANG, Jin; ZHENG, Gehua; ZHU, Mengdi; SU, Ying and HE, Xingyang. Ecological ultra-high performance concrete incorporating multi-scale and multi-source solid wastes as nano-micron filler, ultrafine binder and fine aggregate.
Construction and Building Materials. 2025, Vol. 463, no. February 2025. ISSN 0950-0618.
Detail PIETRZYK-THEL, P.; JAIN, A.; OSIAL, M.; SOBCZAK, K. and MICHALSKA, Monika Kinga. Spongy carbon from inedible food: A step towards a clean environment and renewable energy.
Electrochimica Acta. 2025, Vol. 525, no. June, p. 146129. ISSN 0013-4686.
Detail MAQSOOD, Sarmad; MAQSOOD, Nabeel; SHAHID, Shehryar; SUBHAN, Fazal E.; SARWAR, Muhammad Abdullah; YOUSUFI, Musyyab; QURTHOBI, Ahmad; ZAFAR, Ahsan; KHAN, Muhammad Attique; DAMAŠEVIČIUS, Robertas and MASKELIUNAS, Rytis. Knee osteoarthritis network: A hybrid transformer-based approach for enhanced detection and grading of knee osteoarthritis.
Engineering Applications of Artificial Intelligence. 2025, Vol. 159, no. 111751. ISSN 0952-1976.
Detail SUKUPOVA, Martina; KNITTELOVA, Karolina; PARSIMEHR, Elham; MALINAK, David; NOSKOVA, Denisa; KURCOVA, Jana; MARAKOVA, Ester; KRATOCHVIL, Zdenek; PEKARIK, Vladimir; PSOTKA, Miroslav; KORABECNY, Jan; SIVAK, Ladislav; KULICH, Pavel; HEGER, Zbyněk; ADAM, Vojtech and KUČA, Kamil. N-(5-(2-morpholino-4-oxo-3,4-dihydroquinazolin-8-yl)pyridin-2-yl) acylamides as novel multi-PI3K/DNA-PK/P-gp inhibitors for efficient chemosensitization and MDR alleviation.
Europen Journal of Medicine Chemistry. 2025, Vol. 292, no. August 2025. ISSN 0223-5234.
Detail KUMAR, Harsh; GULERIA, Shivani; DHALARIA, Rajni; NEPOVIMOVÁ, Eugenie; BHARDWAJ, Nidhi; JHA, Pooja; DHANJAL, Daljeet Singh; VERMA, Narinder and MALIK, Tabarak. Valorization of
Moringa oleifera Lam.: Healthy green biomass for circular bioeconomy. Online.
Food Chemistry-X. 2025, Vol. 26, no. February 2025. ISSN 2590-1575. Available from:
https://www.sciencedirect.com/science/article/pii/S2590157525002056.
Detail KUMAR, Harsh; GULERIA, Shivani; SETHI, Nidhi; CIMLER, Richard; PATHERA, Ashok Kumar; DHANJAL, Daljeet Singh; MANICKAM, Sivakumar; KUMAR, Dinesh and NEPOVIMOVÁ, Eugenie. Enhancing meat safety and quality: Innovations in protein-based sensing technologies for contaminant detection. Online.
Food Control. 2025, Vol. 173, no. July 2025. ISSN 0956-7135. Available from:
https://www.sciencedirect.com/science/article/pii/S0956713525000775.
Detail SEIDLEROVÁ, Jana; GABOR, Roman; BĚČÁK, Petr and TOKARČÍKOVÁ, Michaela. Úprava povrchu slitiny Ti-6Al-4V s využitím mikroobloukové oxidace a fyzikální depozice par. Online.
Hutnické listy. 2025, Vol. LXXVII, no. 4-6, p. 30-37. ISSN 0018-8069. Available from:
https://doi.org/10.5281/zenodo.15111236.
Detail AMIR, Amna; HUSSAIN, Sabir; SHAH, Syed Tahir Abbas; HABIB, Rabia; MUNEER, Zahid; NEPOVIMOVÁ, Eugenie; KUCA, Kamil and NURULAIN, Syed Muhammad. Association of BCHE gene SNP rs1803274 (K-variant) and rs3495 with obesity in Pakistani population group.
International Journal of Obesity. 2025, Vol. 49, no. 5, p. 881-887. ISSN 0307-0565.
Detail SHAFIQ, Anum; SINDHU, Tabassum Naz; IQBAL, Muhammad Ahmad and ABUSHAL, Tahani A.. Nonlinear squeezing flow of stratified fluids: A comprehensive study on convective conditions and probable errors.
International Journal of Thermofluids. 2025, Vol. 28, no. June, p. 101290. ISSN 2666-2027.
Detail NAZIR, S.; SINGH, P.K.; RAWAT, N.; JAIN, A.; MICHALSKA, Monika Kinga; YAHYA, M.Z.A.; YUSUF, S.N.F. and DIANTORO, M.. Polyether (polyethylene oxide) derived carbon electrode material and polymer electrolyte for supercapacitor and dye-sensitized solar cell.
Ionics. 2025, Vol. 31, no. 2, p. 2137–2147. ISSN 0947-7047.
Detail KUMAR, Harsh; GULERIA, Shivani; KIMTA, Neetika; NEPOVIMOVÁ, Eugenie; DHANJAL, Daljeet Singh; SETHI, Nidhi; SUTHAR, Tejas; SHAIKH, Ayaz Mukarram; BELA, Bela Kovacs and HARSANYI, Endre. Applications of citrus peels valorisation in circular bioeconomy. Online.
Journal of Agriculture and Food Research. 2025, Vol. 20, no. April 2025. ISSN 2666-1543. Available from:
https://www.sciencedirect.com/science/article/pii/S2666154325001516.
Detail KUMAR, Harsh; BHARDWAJ, Indu; NEPOVIMOVÁ, Eugenie; DHANJAL, Daljeet Singh; SHAIKH, Sumayya Sana; KNOP, Renata; ATUAHENE, David; SHAIKH, Ayaz Mukarram and BELA, Kovacs. Revolutionising broiler nutrition: The role of probiotics, fermented products, and paraprobiotics in functional feeds. Online.
Journal of Agriculture and Food Research. 2025, Vol. 21, no. June 2025. ISSN 2666-1543. Available from:
https://www.sciencedirect.com/science/article/pii/S2666154325002303.
Detail NOVAK, Pavel; MESTEK, Stanislav; NECAS, David; SKOTNICOVÁ, Kateřina; DROZDOVÁ, Ľubomíra; SZURMAN, Ivo and SMETANA, Bedřich. FeSi-NiAl composite as a future tool material.
Journal of Alloys and Compounds. 2025, Vol. 1010, no. 177227. ISSN 0925-8388.
Detail PRAUS, Petr; ŘEHÁČKOVÁ, Lenka; FILIP EDELMANNOVÁ, Miroslava; GAVLOVÁ, Anna; KOŠTEJN, Martin; ŠKUTA, Radim; BEDNÁREK, Jan; BEDNÁŘ, Petr and KOČÍ, Kamila. Photoreforming of PET and PLA microplastics for sustainable hydrogen production using TiO2 and g-C3N4 photocatalysts. Online.
Journal of Environmental Chemical Engineering. 2025, Vol. 13, no. 3, p. 116998. ISSN 2213-2929. Available from:
https://doi.org/10.1016/j.jece.2025.116998.
Detail MACCA, L. S.; JANOVSKÁ, Kamila; TROISE, C. and SANTORO, G.. From data to growth: how customer knowledge management enhances growth hacking strategies.
Journal of Knowledge Management. 2025, no. 2025. ISSN 1367-3270.
Detail RAZA, Ali; MIELOSZYK, Magdalena; RIMAŠAUSKIEN˙E, Ruta; JURENAS, Vytautas; MAQSOOD, Nabeel; RIMAŠAUSKAS, Marius and KUNCIUS, Tomas. Dynamic Properties and Vibration Control of Additively Manufactured Carbon and Glass Fiber Reinforced Polymer Composites Using MFC: A Numerical Study with Experimental Validation. Online.
Journal of Manufacturing and Materials Processing. 2025, Vol. 9, no. 7, p. 235. ISSN 2504-4494. Available from:
https://www.mdpi.com/2504-4494/9/7/235.
Detail PIETRZYK-THEL, P.; JAIN, A.; BOCHENEK, K.; MICHALSKA, Monika Kinga; BASISTA, M.; SZABO, T.; NAGY, P.B.; WOLSKA, A. and KLEPKA, M.. Flexible, tough and high-performing ionogels for supercapacitor application. Online.
Journal of Materiomics. 2025, Vol. 11, no. 1, p. 100833. ISSN 2352-8478. Available from:
https://www.sciencedirect.com/science/article/pii/S2352847824000273.
Detail RAY, Aritra; DAS, Prathama; CHUNDURI, Rithika; KUMAR, Dinesh; DULTA, Kanika; KAUSHAL, Ankur; GUPTA, Shagun; SUMAN, R. J; YADAV, Ajar Nath; NAGRAIK, Rupak and SHARMA, Avinash. Nanocomposite-based agricultural delivery systems: a sustainable approach to enhanced crop productivity and soil health. Online.
Journal of Nanoparticle Research. 2025, Vol. 27, no. 4. ISSN 1388-0764. Available from:
https://link.springer.com/article/10.1007/s11051-025-06302-5.
Detail CHEN, Haotian; LI, Huanxin; SMETANA, Bedřich; NOVÁK, Vlastimil and COMPTON, Richard. Promoting Electrochemical Reversibility: Concave versus Convex Electrodes. Online.
Journal of Physical Chemistry Letters. 2025, Vol. 16, no. 17, p. 4189-4195. ISSN 1948-7185. Available from:
https://pubs.acs.org/doi/10.1021/acs.jpclett.5c00849.
Detail NÉGYESI, Martin; YOSHIHITO, Yamaguchi; KUNIO, Hasegawa; VALÉRY, Lacroix and ANDREW, Morley. Development of Scaling Parameter SR for Negative Stress Ratios R Based on Trend in Experimental Data for Fatigue Crack Growth Rates of Austenitic Stainless Steels for ASME Code Section XI.
Journal of Pressure Vessel Technology, Transactions of the ASME. 2025, Vol. 147, no. 2, p. 021201. ISSN 0094-9930.
Detail ASIM, Muhammad; IQBAL, Javed; ISLAM, Bilal; BASHIR, Javaria; MAQSOOD, Nabeel; SKOTNICOVÁ, Kateřina and NAWAZ, Ahmad. Cr2O3-graphene nanocomposites for high-performance supercapacitors and methylene blue degradation: Synthesis and electrochemical analysis. Online.
Journal of Science: Advanced Materials and Devices. 2025, Vol. 10, no. 3, p. 1-15. ISSN 2468-2284. Available from:
https://www.sciencedirect.com/science/article/pii/S2468217925000929.
Detail AVLONITI, Anthi; ANAXAGOROU, Christiana; STYLIANOU, Ioanna; NGUYEN, Duc Khuong and JANOVSKÁ, Kamila. Global Footprint, Local Imprint: How Institutions and Distance Influence the Corporate Social Performance of Foreign Subsidiaries Across Service Industries. Online.
Management International Review. 2025, no. 2025. ISSN 0938-8249. Available from:
https://link.springer.com/article/10.1007/s11575-025-00581-9.
Detail VODÁREK, Vlastimil; HOLEŠINSKÝ, Jan; KUBOŇ, Zdeněk; PALUPČÍKOVÁ, Renáta; VÁŇOVÁ, Petra and MALCHARCZIKOVÁ, Jitka. Creep Resistance and Microstructure Evolution in P23/P91 Welds. Online.
Materials. 2025, Vol. 18, no. 1. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/18/1/194.
Detail SKOTNICOVÁ, Kateřina; JUŘICA, Jan; ŽIVOTSKÝ, Ondřej; ČEGAN, Tomáš; HRABOVSKÁ, Kamila; MATĚJKA, Vlastimil; ZLÁ, Simona; KAWULOKOVÁ, Monika and CHROBAK, A.. Preparation and Physical Properties of Quaternary Mn2FeSi0.5Al0.5 Alloy Powders with Heusler and β-Mn Structures. Online.
Materials. 2025, Vol. 18, no. 2. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/18/2/309.
Detail YADAV, M.K.; SHUKLA, R.H.; KESAVAN, Praveenkumar; NILAWAR, S.; PERUGU, C.S.; SELLAMUTHU, P.; CHATTERJEE, K.; SUWAS, S.; JAYARAJ, J. and PRASHANTH, K.G.. Microstructural, mechanical, corrosion, and biological behavior of spark plasma sintered commercially pure zinc for biomedical applications. Online.
Materials Advances. 2025, Vol. 6, no. 11, p. 3546-3560. ISSN 2633-5409. Available from:
https://pubs.rsc.org/en/content/articlepdf/2025/ma/d5ma00092k.
Detail SAHOO, S.; NAGARAJA, T.; MICHALSKA, Monika Kinga and DAS, S.R.. A renewable carbon material derived from native European deciduous trees serves as a sustainable electroactive substance for multifunctional energy storage systems. Online.
Nanoscale Advances. 2025, Vol. 7, no. 11, p. 3331-3343. ISSN 2516-0230. Available from:
https://pubs.rsc.org/en/content/articlehtml/2025/na/d5na00018a.
Detail KUMAR, Harsh; DHALARIA, Rajni; KIMTA, Neetika; GULERIA, Shivani; UPADHYAY, Navneet Kumar; NEPOVIMOVÁ, Eugenie; DHANJAL, Daljeet Singh; SETHI, Nidhi and MANICKAM, Sivakumar. Curcumin: A Potential Detoxifier Against Chemical and Natural Toxicants.
Phytotherapy Research. 2025, Vol. 39, no. 3, p. 1494-1530. ISSN 0951-418X.
Detail CHOUDHARY, Ambika; NEPOVIMOVÁ, Eugenie; RAJPUT, Vishnu D; MALIK, Tabarak; CHOUDHARY, Monika; BHARDWAJ, Nidhi; PETER, Lukáš; PURI, Sunil and KIMTA, Neetika. Mechanistic understanding of GABA and trehalose in modulating plant response to drought stress. Online.
Plant Stress. 2025, Vol. 16, no. June 2025. ISSN 2667-064X. Available from:
https://www.sciencedirect.com/science/article/pii/S2667064X25001034.
Detail MAQSOOD, Nabeel; MORDAS, Genrik; RIMASAUSKAS, Marius; SKOTNICOVÁ, Kateřina; ULLAH, Jawad and GONZALEZ-GUTIERREZ, Joamin. Investigation and assessment of mechanical properties of co-extrusion with towpreg continuous carbon fiber reinforced thermoplastic composites manufactured using material extrusion.
Polymer Composites. 2025, Vol. 2025, no. 22.4.2025, p. 1-17. ISSN 0272-8397.
Detail PLATOŠOVÁ, Daniela; RUSÍN, Jiří; SVOBODA, Radek and VAŠINKOVÁ, Markéta. Will Dissolved Hydrogen Reveal the Instability of the Anaerobic Digestion Process?. Online.
Processes. 2025, Vol. 13, no. 1. ISSN 2227-9717. Available from:
https://www.mdpi.com/2227-9717/13/1/126.
Detail FAWAD, Muhammad; MAQSOOD, Nabeel; NAWAZ, Ahmad; ISLAM, Bilal; ZAHEER, Malik and SKOTNICOVÁ, Kateřina. Synthesis, Characterization, and Enhanced Optical and Dielectric Properties of Pure and Ni-Doped ZnO Nanoparticles for Advanced Electronic Applications.
Results in Engineering. 2025, Vol. 26, no. 104824. ISSN 2590-1230.
Detail HRABOVSKÁ, Kamila; ŽIVOTSKÝ, Ondřej; VÁŇOVÁ, Petra; JIRÁSKOVÁ, Yvonna; GEMBALOVÁ, Lucie and HILŠER, Ondřej. Microstructure and magnetism of austenitic steels in relation to chemical composition, severe plastic deformation, and solution annealing. Online.
Scientific Reports. 2025, Vol. 15, no. 1, p. 2010(1)-2010(15). ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-025-86028-5.
Detail ALEXA, Petr; ŽIVOTSKÝ, Ondřej; UHLÁŘ, Radim; KUČA, David; ČEGAN, Tomáš and SZURMAN, Ivo. Fast neutron determination of bulk composition of Mn-based Heusler alloys. Online.
Scientific Reports. 2025, Vol. 15, no. 3, p. 9658(1)-9658(10). ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-025-94264-y.
Detail VALA, Daniel; ZDRÁHALA, J.; HUDECOVÁ, J.; ŠESTÁKOVÁ, H.; ŠEBESTÍK, J.; KOPEČNÝ, D.; KAPITÁN, J.; BOUŘ, P. and POSTAVA, Kamil. Mueller matrix polarimetry reveals chiroptical properties of metal chelates in solutions. Online.
Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy. 2025, Vol. 339, no. October. ISSN 1386-1425. Available from:
https://www.sciencedirect.com/science/article/pii/S1386142525005852?pes=vor&utm_source=scopus&getft_integrator=scopus.
Detail ŠEBEK, František; KUBÍK, Petr; ZAPLETAL, Josef; KUNČICKÁ, Lenka; KOCICH, Radim; PAGÁČ, Marek; PAŠKA, Zbyněk; FOJTÍK, František and HALAMA, Radim. Plasticity and ductile fracture of conventionally manufactured AISI 316L compared to one produced by selective laser melting with and without machining. Online.
The international journal of advanced manufacturing technology. 2025, Vol. 137, no. 7-8, p. 3933-3948. ISSN 0268-3768. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:001454509600001.
Detail KESAVAN, Praveenkumar; GOPAL, Vasanth; PRASANTH, S; MANIVASAGAM, Geetha; CHATTERJEE, Kaushik and SUWAS, Satyam. Tribocorrosion of biomedical Ti-Nb-Ta alloys fabricated by directed energy deposition using elemental powders.
Tribology international. 2025, Vol. 211, no. 211. ISSN 0301-679X.
Detail BUCHBERGER, D.A.; HAMANKIEWICZ, B.; MICHALSKA, Monika Kinga; GŁASZCZKA, A. and CZERWINSKI, A.. Ex Situ Raman Mapping of LiMn2O4 Electrodes Cycled in Lithium-Ion Batteries. Online.
ACS Omega. 2024, Vol. 9, no. 28, p. 30381-30391. ISSN 2470-1343. Available from:
https://pubs.acs.org/doi/full/10.1021/acsomega.4c01480.
Detail ŽIVOTSKÝ, Ondřej; GEMBALOVÁ, Lucie; SKOTNICOVÁ, Kateřina; SZURMAN, Ivo; ČEGAN, Tomáš; JUŘICA, Jan; MALINA, Ondřej and ČÍŽEK, Jakub. Low-temperature antiferromagnetism in quaternary Mn2FeSi0.5Al0.5 alloys. Online.
AIP Advances. 2024, Vol. 14, no. 1, p. 015218(1)-015218(5). ISSN 2158-3226. Available from:
https://pubs.aip.org/aip/adv/article/14/1/015218/2993137.
Detail MACHÁČKOVÁ, Adéla; BÁRTA, Otakar and BROŽOVÁ, Silvie. Applications of Tungsten Pseudo-Alloys in the Energy Sector. Online.
APPLIED SCIENCES-BASEL. 2024, Vol. 14, no. 2. ISSN 2076-3417. Available from:
https:// doi.org/10.3390/app14020647.
Detail KOZEL, Roman; BĚLICA, Josef; KEMPA, Filip; CHLOPECKÝ, Jakub; GRYCZ, Ondřej and CEHLÁR, Michal. Waste management systems in the context of sustainability. Online.
Acta Montanistica Slovaca. 2024, Vol. 29, no. 1, p. 180-192. ISSN 1335-1788. Available from:
https://actamont.tuke.sk/pdf/2024/n1/16kozel.pdf.
Detail MAQSOOD, Nabeel; RIMASAUSKAS, Marius; GHOBAKHLOO, Morteza; MORDAS, Genrik and SKOTNICOVÁ, Kateřina. Additive manufacturing of continuous carbon fiber reinforced polymer composites using materials extrusion process. Mechanical properties, process parameters, fracture analysis, challenges, and future prospect. A review. Online.
Advanced Composites and Hybrid Materials. 2024, Vol. 7, no. 6. ISSN 2522-0128. Available from:
https://link.springer.com/article/10.1007/s42114-024-01035-w.
Detail MIČICA, Martin; AYARI, Sabrine; HEMMAT, Minoosh; ARFAOUI, Mehdi; VALA, Daniel; POSTAVA, Kamil; VERGNET, Hadrien; TIGNON, Jerome; MANGENEY, Juliette; GUO, Shasha; YU, Xuechao; WANG, Qi Jie; LIU, Zheng; JAZIRI, Sihem; CAROSELLA, Francesca; FERREIRA, Robson and DHILLON, Sukhdeep. Determining Bandgaps in the Layered Group-10 2D Transition Metal Dichalcogenide PtSe2. Online.
Advanced Functional Materials. 2024, no. 17 October 2024, p. 2408982. ISSN 1616-301X. Available from:
https://onlinelibrary.wiley.com/doi/10.1002/adfm.202408982.
Detail WANG, Haobo; YOU, Qing; KANG, Bei; JING, Huaqing; SHI, Zhiyuan; KRIZKOVA, Sona; HEGER, Zbyněk; ADAM, Vojtech; CHEN, Xiaoyuan and LI, Nan. Pulling the Rug Out from Under: Biomechanical Microenvironment Remodeling for Induction of Hepatic Stellate Cell Quiescence. Online.
Advanced Materials. 2024, Vol. 36, no. 49. ISSN 0935-9648. Available from:
https://advanced.onlinelibrary.wiley.com/doi/full/10.1002/adma.202406590.
Detail KOLEJÁK, Pierre; LEZIER, Geoffrey; VALA, Daniel; MATHMANN, Baptiste; HALAGAČKA, Lukáš; GELNÁROVÁ, Zuzana; DUSCH, Yannick; LAMPIN, Jean-François; TIERCELIN, Nicolas; POSTAVA, Kamil and VANWOLLEGHEM, Mathias. Maximizing the Electromagnetic Efficiency of Spintronic Terahertz Emitters. Online.
Advanced Photonics Research. 2024, Vol. 5, no. 11. ISSN 2699-9293. Available from:
https://onlinelibrary.wiley.com/doi/10.1002/adpr.202400064.
Detail CHEN, Haotian; YANG, Minjun; SMETANA, Bedřich; NOVÁK, Vlastimil; MATĚJKA, Vlastimil and COMPTON, Richard G. Discovering Electrochemistry with an Electrochemistry-Informed Neural Network (ECINN). Online.
Angewandte Chemie - International Edition. 2024, Vol. 63, no. 13. ISSN 1433-7851. Available from:
https://onlinelibrary.wiley.com/doi/epdf/10.1002/anie.202315937.
Detail ČARNOGURSKÁ, Mária; PŘÍHODA, Miroslav; ANDREJIOVÁ, Miriam and TÓTH, Lukáš. Analysis of the mathematical models for identifying the thickness of the fouling layer in natural gas coolers. Online.
Applied Sciences. 2024, Vol. 14, no. 10, p. 4003. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/14/10/4003.
Detail GABOR, Roman; CVRČEK, Ladislav; KUDRNOVA, Marie; HLINKA, Josef; VEČEŘ, Marek; BUŘIL, Matěj; WALTER, Jan; CEKADA, Miha; DRNOVSEK, Aljaz; UNUCKA, Petr; MAMULOVÁ KUTLÁKOVÁ, Kateřina; MOTYKA, Oldřich and SEIDLEROVÁ, Jana. ZrN coating as a source for the synthesis of a new hybrid ceramic layer. Online.
Applied Surface Science Advances. 2024, Vol. 22, no. August. ISSN 2666-5239. Available from:
http://www.sciencedirect.com/science/article/pii/S2666523924000436.
Detail ASADU, C.O.; UJAH, C.O.; EKWUEME, B.N.; EZEMA, C.A.; ONAH, T.O.; MAKHKAMOV, T.; AKA, C.C.; UGWELE, Franklin and ONU, C.E.. Treatment of crude oil-polluted water using CoFe2O4-doped mango (Mangifera indica) seed shell composite.
Applied Water Science. 2024, Vol. 14, no. 7. ISSN 2190-5487.
Detail ŠTRBOVÁ, Kristína; MOTYKA, Oldřich; MIKESKOVÁ, Gabriela; OLŠOVSKÁ, Eva and SEIDLEROVÁ, Jana. Indoor moss biomonitoring proving construction-related pollution load from outdoors.
Building and Environment. 2024, Vol. 267, no. Part A, p. 112198. ISSN 0360-1323.
Detail BAŠISTOVÁ, Martina; VONTOROVÁ, Jiřina; ZLÁ, Simona; KAWULOKOVÁ, Monika; LICHÝ, Petr and DVORSKÝ, Tomáš. Variability in the distinctive features of silica sands in Central Europe. Online.
Buildings. 2024, Vol. 14, no. 1. ISSN 2075-5309. Available from:
https://doi.org/10.3390/buildings14010279.
Detail DAVIDOVÁ, Markéta; TOKARSKÝ, Jonáš; KULHÁNKOVÁ, Lenka; VALLOVÁ, Silvie; ŘEHÁČKOVÁ, Lenka; RITZ, Michal and KORMUNDA, Martin. Graphite and multi-layer graphene from a low molecular weight carbon source. Online.
Carbon. 2024, Vol. 230, no. November 2024, p. 1-11. ISSN 0008-6223. Available from:
https://doi.org/10.1016/j.carbon.2024.119662.
Detail JANKOVSKÁ, Zuzana; MATĚJOVÁ, Lenka; TOKARSKÝ, Jonáš; PEIKERTOVÁ, Pavlína; DOPITA, Milan; GORZOLKOVÁ, Karolína; HABERMANNOVÁ, Dominika; VAŠTYL, Michal and BĚLÍK, Jakub. Microporous carbon prepared by microwave pyrolysis of scrap tyres and the effect of K+ in its structure on xylene adsorption. Online.
Carbon. 2024, Vol. 216, no. 5 January 2024, p. 1-20. ISSN 0008-6223. Available from:
https://doi.org/10.1016/j.carbon.2023.118581.
Detail ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; TOKARSKÝ, Jonáš; HEGER, Milan; ZIMNÝ, Ondřej; MATÝSEK, Dalibor; PEIKERTOVÁ, Pavlína; RITZ, Michal; WALEK, Josef and LEINWEBEROVÁ, Sára. Rheological behaviour of CaO-MgO-SiO2-Al2O3-B2O3 system with varying B2O3 content up to 30 wt% at basicity of 0.4.
Ceramics International. 2024, Vol. 50, no. 1, p. 1389-1397. ISSN 0272-8842.
Detail GABOR, Roman; ŠLAMBOROVÁ, I; MAŠEK, Karel; VEČEŘ, Marek; SIMHA MARTYNKOVÁ, Gražyna; HLINKA, Josef; TOKARČÍKOVÁ, Michaela; MOTYKA, Oldřich; BĚČÁK, Petr and SEIDLEROVÁ, Jana. Structural modification of aluminium alloy for preparation of hydrophobic and antibacterial ZnO-based coatings. Online.
Ceramics International. 2024, Vol. 50, no. 18, p. 33751-33761. ISSN 0272-8842. Available from:
https://www.sciencedirect.com/science/article/pii/S0272884224026063.
Detail WANG, Y.; XIANG, Z.; SU, Y.; HE, X.; YANG, J.; LI, Y.; JIN, Z. and STRNADEL, Bohumír. The carbon activation of electric furnace ferronickel slag and its utilization in cement-based materials. Online.
Chemical engineering journal. 2024, Vol. 496, no. 496. ISSN 1385-8947. Available from:
https://www.sciencedirect.com/science/article/pii/S1385894724058789.
Detail MIROSHNICHENKO, D.V.; SHMELTSER, K.O.; MYKHAILOVA, Iryna; KRAVCHENKO, S.O. and SOLOVIEV, E.L.. Specific electrical resistance as an indicator ordering of coke structure. Online.
Chemistry, technology and application of substances. 2024, Vol. 7, no. 1, p. 78-85. ISSN 2617-7307. Available from:
https://science.lpnu.ua/ctas.
Detail VONTOROVÁ, Jiřina; MOHYLA, Petr and KREISLOVÁ, Kateřina. Quality of Zinc Coating Formed on Structural Steel by Hot-Dip Galvanizing after Surface Contamination. Online.
Coatings. 2024, Vol. 14, no. 493. ISSN 2079-6412. Available from:
https://doi.org/10.3390/ coatings14040493.
Detail CHANG, Lee-Lee; HU, Chechia; HUANG, Chun-Chieh; MATĚJKA, Vlastimil and TUNG, Kuo-Lun. Influence of Cu incorporation on activated carbon for CO 2 adsorption and electrocatalytic hydrogen evolution reaction.
Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2024, Vol. 690, . ISSN 0927-7757.
Detail SHARMA, Rohit; HRUSKA, Jan; PETER, Lukáš; RANDLOVA, Kristina and KUČA, Kamil. Trends in the Treatment of Chronic Wounds.
Current Medicinal Chemistry. 2024, no. September 2024. ISSN 0929-8673.
Detail KHANAL, Sonali; PILLAI, Manjusha; BISWAS, Deblina; ISLAM, Muhammad Torequl; VERMA, Rachna; KUČA, Kamil; KUMAR, Dinesh; NAJMI, Asim; ZOGHEBI, Khalid; KHALID, Asaad and MOHAN, Syam. A PARADIGM SHIFT IN THE DETECTION OF BLOODBORNE PATHOGENS: CONVENTIONAL APPROACHES TO RECENT DETECTION TECHNIQUES. Online.
EXCLI Journal. 2024, Vol. 23, no. 2024-10-26, p. 1245-1275. ISSN 1611-2156. Available from:
https://pubmed.ncbi.nlm.nih.gov/39574968/.
Detail OLŠOVSKÁ, Eva; LEHOTSKÁ MIKUŠOVÁ, Miroslava; TULINSKÁ, Jana; ROLLEROVÁ, Eva; VILAMOVÁ, Zuzana; LÍŠKOVÁ, Aurélia; HORVÁTHOVÁ, Mira; SZABOVÁ, Michaela; SVOBODA, Ladislav; GABOR, Roman; HAJNYŠ, Jiří; DVORSKÝ, Richard; KUKUTSCHOVÁ, Jana and LUKÁN, Norbert. Immunotoxicity of stainless-steel nanoparticles obtained after 3D printing. Online.
Ecotoxicology and environmental safety. 2024, Vol. 272, no. March. ISSN 0147-6513. Available from:
https://www.sciencedirect.com/science/article/pii/S0147651324001635?via%3Dihub.
Detail ZENG, Y.; VALAPPIL, L.T.; SATRAPINSKYY, L.; ROCH, T.; PLECENIK, T.; GREGOR, M.; KHAN, M.Z.; PAVLOVSKÝ, Jiří; RELI, Martin and MOTOLA, M.. Blooming microflowers: Shaping TiO2 nanostructures via anodization in metal chloride-based electrolytes. Online.
Electrochimica Acta. 2024, Vol. 502, no. October. ISSN 0013-4686. Available from:
https://www.sciencedirect.com/science/article/pii/S0013468624010922.
Detail BALLARI, Maria de los Milagros; FILIP EDELMANNOVÁ, Miroslava; RICKA, Rudolf; RELI, Martin and KOČÍ, Kamila. Exploring kinetics and mass transfer in photocatalytic CO2 reduction: Impact of photocatalyst loading and stirrer speed. Online.
Energy Conversion and Management-X. 2024, Vol. 23, no. July. ISSN 2590-1745. Available from:
https://www.sciencedirect.com/science/article/pii/S2590174524001296.
Detail NAZIR, Sehrish; SINGH, Pramod K.; JAIN, Amrita; MICHALSKA, Monika Kinga; YAHYA, M. Z.A.; YUSUF, S. N.F.; DIANTORO, Markus; LATIF, Famiza Abdul and SINGH, Manoj K.. Polyether-Derived Carbon Material and Ionic Liquid (Tributylmethylphosphonium iodide) Incorporated Poly(Vinylidene Fluoride-co-Hexafluoropropylene)-Based Polymer Electrolyte for Supercapacitor Application.
Energy Storage. 2024, Vol. 6, no. 8, p. e70083. ISSN 2578-4862.
Detail BUĽKO, Branislav; DEMETER, Peter; PRIESOL, Ivan; HUBATKA, Slavomír; FOGARAŠ, Lukíš; DEMETER, Jaroslav; HRUBOVČÁKOVÁ, Martina; PYLYPENKO, Andrii; DUBEC, Dominik; VARCHOLOVÁ, Dagmara and LAPENKO, Oleksii. The Benefits of Using an Advanced Material for Production of Spherical Impact Pad for Tundish. Online.
Engineering Proceedings. 2024, Vol. 64, no. 17. ISSN 2673-4591. Available from:
https://www.mdpi.com/2673-4591/64/1/17.
Detail HALFAR, Jan; HEVIÁNKOVÁ, Silvie; BROŽOVÁ, Kateřina; ČABANOVÁ, Kristina; VALIGŮROVÁ, Alice and MOTYKA, Oldřich. Microplastic contamination in Czech drinking water: insights from comprehensive monitoring. Online.
Environmental Sciences Europe. 2024, Vol. 36, no. 1, p. 1-19. ISSN 2190-4707. Available from:
https://enveurope.springeropen.com/articles/10.1186/s12302-024-01036-y.
Detail MACCA, Luca Simone; SHEHZAD, Nazia; KOVACOVA, Maria and SANTORO, Gabriele. Unlocking e-commerce potential: micro and small enterprises strike back in the food and beverage industry.
European Journal of Innovation Management. 2024, no. 2023. ISSN 1460-1060.
Detail YANG, J.; LIU, S.; HE, X.; SU, Y.; ZENG, J. and STRNADEL, Bohumír. Fluid-Related Performances and Compressive Strength of Clinker-Free Cementitious Backfill Material Based on Phosphate Tailings. Online.
FDMP-Fluid Dynamics & Materials Processing. 2024, Vol. 20, no. 9, p. 2077-2090. ISSN 1555-256X. Available from:
https://www.sciencedirect.com/org/science/article/pii/S1555256X24000705.
Detail NAG, Akash; DIXIT, A.R.; PETRŮ, Jana; VÁŇOVÁ, Petra; KONEČNÁ, Kateřina and HLOCH, Sergej. MAXIMIZATION OF WEAR RATES THROUGH EFFECTIVE CONFIGURATION OF STANDOFF DISTANCE AND HYDRAULIC PARAMETERS IN ULTRASONIC PULSATING WATERJET.
Facta Universitatis. Series: Mechanical Engineering. 2024, Vol. 22, no. 2, p. 165-186. ISSN 0354-2025.
Detail BERNAT, Szymon; DI BARTOLOMEO, Francesca; ARMADA, Sergio; VALAKER, Emil; BONTURI, Nemailla; KOSETO, Deni; HAUGEN, Tone; KVERNBRATEN, Ann-Karin; STAVAREK, Petr; VEČEŘ, Marek and ZELENKA, Ladislav. Exploring the potential of microbial biomass and microbial extracted oils in tribology: a sustainable frontier for environmentally acceptable lubricants. Online.
Green Chemistry Letters and Reviews. 2024, Vol. 17, no. 1. ISSN 1751-8253. Available from:
https://www.tandfonline.com/doi/epdf/10.1080/17518253.2024.2330644?src=getftr.
Detail WALEK, Josef; ADÉLA, Odehnalová; SNIEGOŇ, Michal; CHUDOBOVÁ, Lucie; CUPEK, Jiří; FRANTIŠEK, Vrána; PAVEL, Fila and MARTIN, Balcar. Studium termofyzikálních vlastností ocelí a strusek při zpracování technologií ESR.
Hutnické listy. 2024, Vol. 77, no. 1-3, p. 10-16. ISSN 0018-8069.
Detail ČÍŽEK, Petr; DOBIÁŠ, Marek and JONŠTA, Petr. Vliv aplikovaného faktoru intenzity napětí na lomové chování předzatížených C(T) těles v prostředí vysokotlakého vodíku. Online.
Hutnické listy. 2024, Vol. LXXVII, no. 4-6, p. 18-23. ISSN 0018-8069. Available from:
http://www.hutnickelisty.cz.
Detail JONŠTA, Petr; KANDER, Jan and NOGA, Roman. Influence of temperature and working rolls rotational speed of the rolling mill on the qualitative properties of seamless N80 steel tubes. Online.
Hutnické listy. 2024, Vol. LXXVII, no. 4-6, p. 24-29. ISSN 0018-8069. Available from:
http://www.hutnickelisty.cz.
Detail ASIM, Arslan; ČADA, Michal; MA, Yuan and FINE, Alan. Dual-Resonance Split Ring Resonator Metasurface for Terahertz Biosensing.
IEEE Sensors Journal. 2024, Vol. 24, no. 9, p. 14189-14196. ISSN 1530-437X.
Detail TANDON, Anushree; CHAUDHARY, Sanjay; NIJJER, Shivinder; VILAMOVÁ, Šárka; TEKELAS, Fanos and KAUR, Puneet. Challenges in sustainability transitions in B2B firms and the role of corporate entrepreneurship in responding to crises created by the pandemic. Online.
Industrial Marketing Management. 2024, Vol. 118, no. 2024, p. 93-109. ISSN 0019-8501. Available from:
https://www.sciencedirect.com/science/article/pii/S0019850124000191.
Detail LE, T. T.; LE, H. C.; ENRICO, B. and JANOVSKÁ, Kamila. The roles of corporate social responsibility, international entrepreneurial orientation, dynamic and technological capabilities in the performance of international new ventures. Online.
International Entrepreneurship and Management Journal. 2024, no. 2024. ISSN 1554-7191. Available from:
https://link.springer.com/article/10.1007/s11365-024-01006-z.
Detail KOCICH, Radim; KUNČICKÁ, Lenka; BENČ, Marek; WEISER, Adam and NÉMETH, Gergely. Corrosion behavior of selective laser melting-manufactured bio-applicable 316L stainless steel in ionized simulated body fluid. Online.
International Journal of Bioprinting. 2024, Vol. 10, no. 1, p. 339-356. ISSN 2424-7723. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:001143303900003.
Detail GABOR, Roman; CVRČEK, Ladislav; MAŠEK, Karel; HLINKA, Josef; MOTYKA, Oldřich; WALTER, Jan; SIMHA MARTYNKOVÁ, Gražyna; MIKESKOVÁ, Gabriela and SEIDLEROVÁ, Jana. Tribological and corrosion properties of β-TiNb alloy modified by plasma electrolytic oxidation: Evaluation of the synergistic effect of composition and processing time through statistical evaluation. Online.
International Journal of Refractory Metals and Hard Materials. 2024, Vol. 118, no. 2024, p. 106502. ISSN 0263-4368. Available from:
https://www.sciencedirect.com/science/article/pii/S026343682300402X.
Detail DAS, Pradip; HALAMA, Radim; NATARAJAN, Ajay Vignesh; KHUTIA, Niloy; DEY, Partha Pratim; KUNČICKÁ, Lenka; HAJNYŠ, Jiří; KOCICH, Radim and SARI, Fatih. Constitutive modelling and damage prediction of AlSi10Mg alloy manufactured by SLM technology with emphasis on ratcheting in LCF regime.
International journal of fatigue. 2024, Vol. 181, no. April, p. 108115. ISSN 0142-1123.
Detail SMIJOVÁ, Julie; MAMULOVÁ KUTLÁKOVÁ, Kateřina; PEIKERTOVÁ, Pavlína; GABOR, Roman; PAVLOVSKÝ, Jiří and TOKARSKÝ, Jonáš. Nano-ZnS photocatalytically active both under UV and solar radiation: A comparison of conventional and microwave-assisted hydrothermal syntheses with various reaction conditions.
Journal of Alloys and Compounds. 2024, Vol. 976, no. March. ISSN 0925-8388.
Detail WEISS, Zdeněk; ČAPEK, Jaroslav; KAČENKA, Zdeněk; EKRT, Ondřej; KOPEČEK, Jaromír; LOSERTOVÁ, Monika and VOJTĚCH, Dalibor. Analysis of hydrogen in a hydrogenated, 3D-printed Ti-6Al-4V alloy by glow discharge optical emission spectroscopy: sample heating effects. Online.
Journal of Analytical Atomic Spectrometry. 2024, Vol. 39, no. 4. ISSN 0267-9477. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:001186373500001.
Detail MATĚJOVÁ, Lenka; VAŠTYL, Michal; JANKOVSKÁ, Zuzana; CICHOŇOVÁ, Petra; PEIKERTOVÁ, Pavlína; ŠEDĚNKOVÁ, Ivana; CRUZ, Gerardo Juan Francisco; SOLIS VELIZ, Jose Luis and KANIA, Ondřej. Microwave pyrolysis-prepared engineering carbons from corn cobs and red mombin seeds towards xylene adsorption.
Journal of Analytical and Applied Pyrolysis. 2024, Vol. 181, no. -, p. 106630. ISSN 0165-2370.
Detail RICKA, Rudolf; WANAG, Agnieszka; KUSIAK-NEJMAN, Ewelina; MOSZYŃSKI, D.; FILIP EDELMANNOVÁ, Miroslava; RELI, Martin; BAĎURA, Zdeněk; ZOPPELLARO, Giorgio; ZBOŘIL, Radek; MORAWSKI, Antoni W. and KOČÍ, Kamila. Photocatalytic reduction of CO2 over Ti3+ self-doped TiO2-based nanomaterials. Online.
Journal of CO2 Utilization. 2024, Vol. 80, no. february. ISSN 2212-9820. Available from:
https://www.sciencedirect.com/science/article/pii/S2212982024000362#ab0015.
Detail BARGONI, Augusto; FERRARIS, Alberto; VILAMOVÁ, Šárka and HUSSAIN, Wan Mohd Hirwani Wan. Digitalisation and internationalisation in SMEs: a systematic review and research agenda.
Journal of Enterprise Information Management. 2024, no. 012024. ISSN 1741-0398.
Detail SAGAR, Tatiparthi Vikram; KUMAR, Praveen; FILIP EDELMANNOVÁ, Miroslava; RICKA, Rudolf; RELI, Martin; KOČÍ, Kamila; NADRAH, Peter; EMIN, Saim; ŠKAPIN, Andrijana Sever and ŠTANGAR, Urska Lavrencic. Synergistic effect of manganese on zirconia and ceria supports for improving photoreduction of CO2. Online.
Journal of Environmental Chemical Engineering. 2024, Vol. 12, no. 2. ISSN 2213-2929. Available from:
https://www.sciencedirect.com/science/article/pii/S2213343724002021#ack0005.
Detail PRAUS, Petr. Photoreforming for microplastics recycling: A critical review.
Journal of Environmental Chemical Engineering. 2024, Vol. 12, no. 3, p. 112525. ISSN 2213-2929.
Detail PAVLOVSKÝ, Jiří; SEIDLEROVÁ, Jana; PĚGŘIMOČOVÁ, Zuzana; VONTOROVÁ, Jiřina; MOTYKA, Oldřich; MICHALSKA, Monika Kinga; SMUTNÁ, Kateřina; ROUPCOVÁ, Petra; NOVÁK, Vlastimil; MATĚJKA, Vlastimil and VLČEK, Jozef. Influence of the chemical composition of leachates on the results of ecotoxicity tests for different slag types.
Journal of Environmental Management. 2024, Vol. 366, p. 121731. ISSN 0301-4797.
Detail PLACOVÁ, Karla; HEVIÁNKOVÁ, Silvie; HALFAR, Jan; BROŽOVÁ, Kateřina; MOTYKA, Oldřich; ČABANOVÁ, Kristina; DRABINOVÁ, Silvie and CHROMÍKOVÁ, Jitka. The ability of UWWTP to remove NSAIDs: Impact on water quality in the Odra River Czech Republic concerning incoming European legislation. Online.
Journal of Hazardous Materials Advances. 2024, Vol. 16, no. listopad 2024, p. 100477. ISSN 2772-4166. Available from:
https://www.sciencedirect.com/science/article/pii/S2772416624000780.
Detail MECHALI, Abdesselam; HLINKA, Josef; KRESTA, Michal; PETROVIC, M.; MĚSÍČEK, Jakub; JAHAN, I.; HAJNYŠ, Jiří and PETRŮ, Jana. Effect of Powder Recycling on the Surface and Selected Technological Properties of M300 Maraging Steel Produced via the SLM Method. Online.
Journal of Manufacturing and Materials Processing. 2024, Vol. 8, no. 6. ISSN 2504-4494. Available from:
https://www.mdpi.com/2504-4494/8/6/267.
Detail RAWAT, S.; SINGH, P.K.; JAIN, A.; SONG, S.; YAHYA, M.Z.A.; SAVILOV, S.V.; DIANTORO, M.; MICHALSKA, Monika Kinga; POLU, A.R. and SINGH, R.C.. Ionic liquid (1-butyl-1-methylpyrrolidinium trifluoromethanesulfonate) doped polyethylene polymer electrolyte for energy devices. Online.
Journal of Materials Science: Materials in Electronics. 2024, Vol. 35, no. 24. ISSN 0957-4522. Available from:
https://link.springer.com/article/10.1007/s10854-024-13397-4#citeas.
Detail PRAUS, Petr; SMÝKALOVÁ, Aneta; ŠKUTA, Radim; KOŠTEJN, Martin; PAVLOVSKÝ, Jiří; FONIOK, Kryštof; TOKARSKÝ, Jonáš; FILIP EDELMANNOVÁ, Miroslava and KOČÍ, Kamila. Graphitic C3N4 and Ti3C2 nanocomposites for the enhanced photocatalytic degradation of organic compounds and the evolution of hydrogen under visible irradiation.
Journal of Photochemistry and Photobiology A: Chemistry. 2024, Vol. 447, no. 15 January, p. 115260. ISSN 1010-6030.
Detail CHEN, Haotian; SMETANA, Bedřich; NOVÁK, Vlastimil; ZHANG, Yuanmin; SOKOLOV, Stanislav V; KAETELHOEN, Enno; LUO, Zhiyao; ZHU, Mingcheng and COMPTON, Richard G. Removing 65 Years of Approximation in Rotating Ring Disk Electrode Theory with Physics-Informed Neural Networks. Online.
Journal of Physical Chemistry Letters. 2024, Vol. 15, no. 24, p. 6315-6324. ISSN 1948-7185. Available from:
https://pubs.acs.org/doi/10.1021/acs.jpclett.4c01258.
Detail DOBROVSKÁ, Jana; SKALKOVA, Petra; DROZDOVÁ, Ľubomíra; LABAJ, Ivan; ZLÁ, Simona; DUBEC, Andrej and KAWULOKOVÁ, Monika. Pyrolysis of natural rubber-cellulose composites: isoconversional kinetic analysis based on thermogravimetric data. Online.
Journal of thermal analysis and calorimetry. 2024, Vol. 149, p. 3111-3124. ISSN 1388-6150. Available from:
https://link.springer.com/article/10.1007/s10973-024-12933-y.
Detail MATĚJKA, Vlastimil; JAYASHREE, Priyadarshini; FONIOK, Kryštof; VLČEK, Jozef; MATĚJKOVÁ, Petra and STRAFFELINI, Giovanni. Utilization of Magnetic Fraction Isolated from Steel Furnace Slag as a Mild Abrasive in Formulation of Cu-Free Friction Composites. Online.
Lubricants. 2024, Vol. 12, no. 12, p. 1-17. ISSN 2075-4442. Available from:
https://www.mdpi.com/2075-4442/12/12/440.
Detail VEČEŘ, Marek; STAVÁREK, Petr; KRČKOVÁ, Simona; ZELENKA, Ladislav and ARMADA, Sergio. Environmentally Acceptable Lubricants for Stern Tube Application: Shear Stability and Friction Factor. Online.
Lubricants. 2024, Vol. 12, no. 323, p. 1-24. ISSN 2075-4442. Available from:
https://www.mdpi.com/2075-4442/12/9/323.
Detail MECHALI, Abdesselam; HLINKA, Josef; MĚSÍČEK, Jakub; HAJNYŠ, Jiří; ZELINKA, Jan; KRIŠÁK, Dominik; ČEPOVÁ, Lenka; BLÁHA, Roman; ČEP, Robert and PETRŮ, Jana. EFFECT OF TUMBLING ON THE M300 MARAGING STEEL PARTS MADE BY SELECTIVE LASER MELTING. Online.
MM Science Journal. 2024, Vol. 2024, no. october 2024, p. 7491-7498. ISSN 1803-1269. Available from:
https://www.mmscience.eu/journal/issues/october-2024/articles/effect-of-tumbling-on-the-m300-maraging-steel-parts-made-by-selective-laser-melting.
Detail MECHALI, Abdesselam; SADÍLEK, Marek; MRKVICA, Ivan; HLINKA, Josef; JAHAN, Ibrahim; PAGÁČ, Marek; GAUTAM, Preeti; MĚSÍČEK, Jakub; HAJNYŠ, Jiří and PETRŮ, Jana. RESEARCH ABOUT M300 MARAGING STEEL METALLIC POWDER FOR USE IN SLM 3D PRINTING. Online.
MM Science Journal. 2024, Vol. 2024, no. 1, p. 7569-7575. ISSN 1803-1269. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:001326839200001.
Detail NOVAK, Pavel; MESTEK, Stanislav; MICHALCOVA, Alena; TSEPELEVA, Alisa; SKOTNICOVÁ, Kateřina and SZURMAN, Ivo. How to Determine Possible Interactions of Silicide and Aluminide in Preparation of Composites. Online.
Manufacturing Technology. 2024, Vol. 24, no. 1, p. 104-109. ISSN 1213-2489. Available from:
https://www.journalmt.com/pdfs/mft/2024/01/17.pdf.
Detail DRIMALOVA, P.; NOVY, F.; UHRIČIK, M.; VÁŇOVÁ, Petra; ŠIKYŇA, L.; CHVALNIKOVA, V. and SLEZAK, M.. Effect of Change in Current Density on Hydrogen Embrittlement of Advanced High-Strength Steel S960MC during Hydrogenation. Online.
Manufacturing Technology. 2024, Vol. 24, no. 1, p. 40-46. ISSN 1213-2489. Available from:
https://journalmt.com/artkey/mft-202401-0008_effect-of-change-in-current-density-on-hydrogen-embrittlement-of-advanced-high-strength-steel-s960mc-during-hyd.php.
Detail KUBÁŠOVÁ, Kristýna; DRÁTOVSKÁ, Veronika; LOSERTOVÁ, Monika; SALVETR, Pavel; KOPELENT, Michal; KOŘÍNEK, Filip; HAVLAS, Vojtěch; DZUGAN, Jan and DANIEL, Matej. A Review on Additive Manufacturing Methods for NiTi Shape Memory Alloy Production. Online.
Materials. 2024, Vol. 17, no. 6. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/17/6/1248.
Detail WALEK, Josef; ODEHNALOVA, Adela and KOCICH, Radim. Analysis of Thermophysical Properties of Electro Slag Remelting and Evaluation of Metallographic Cleanliness of Steel. Online.
Materials. 2024, Vol. 17, no. 18. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/17/18/4613.
Detail IZÁK, Josef; STRUNZ, Pavel; LEVYTSKA, Olena; NÉMETH, Gergely; ŠAROUN, Jan; KOCICH, Radim; PAGÁČ, Marek and TUHARIN, Kostyantyn. Residual Stress Distribution in Dievar Tool Steel Bars Produced by Conventional Additive Manufacturing and Rotary Swaging Processes. Online.
Materials. 2024, Vol. 17, no. 23, p. 2-22. ISSN 1996-1944. Available from:
https://doi.org/10.3390/ma17235706.
Detail LANG, Jaroslav; BEDNÁREK, Jan; RITZ, Michal; KORMUNDA, Martin; ZELENKA, Tomáš; VAŠTYL, Michal; GAVLOVÁ, Anna; KOLSKÁ, Zdeňka and FÉROVÁ, Marta. Microporous carbonaceous adsorbent prepared from pyrolyzed polymer. Online.
Materials Advances. 2024, Vol. 5, no. 16, p. 6458-6468. ISSN 2633-5409. Available from:
https://pubs.rsc.org/en/content/articlelanding/2024/ma/d4ma00141a#!divAbstract.
Detail JAIN, A. and MICHALSKA, Monika Kinga. Enhanced electrochemical properties of multiwalled carbon nanotubes modified with silver nanoparticles for energy storage application.
Materials Chemistry and Physics. 2024, Vol. 317, no. April. ISSN 0254-0584.
Detail ŽIVOTSKÝ, Ondřej; SZURMAN, Ivo; GEMBALOVÁ, Lucie; ALEXA, Petr; UHLÁŘ, Radim; ČEGAN, Tomáš; MALINA, Ondřej; ČÍŽEK, Jakub; VEVERKA, Miroslav and GORAUS, Jerzy. Physical properties of MnFeAl-based alloys affected by Mn content and annealing.
Materials Chemistry and Physics. 2024, Vol. 320, no. July 2024, p. 129480(1)-129480(8). ISSN 0254-0584.
Detail RELI, Martin; NADRAH, Peter; FILIP EDELMANNOVÁ, Miroslava; RICKA, Rudolf; SKAPIN, Andrijana Sever; STANGAR, Urska Lavrencic and KOČÍ, Kamila. Photocatalytic CO2 reduction over mesoporous TiO2 photocatalysts. Online.
Materials Science in Semiconductor Processing. 2024, Vol. 169, no. January. ISSN 1369-8001. Available from:
https://www.sciencedirect.com/science/article/pii/S1369800123006200.
Detail CVEJN, Daniel; STARUKH, Halyna; KOŠTEJN, Martin; PEIKERTOVÁ, Pavlína and PRAUS, Petr. On mechanism of the synthesis of boron-doped graphitic carbon nitride.
Materials Today Chemistry. 2024, Vol. 39, no. June, p. 102157. ISSN 2468-5194.
Detail DE, Conti M.C.M.D.; DE, Castro A.A.; ASSIS, L.C.; LIMA, N.M.; ESCRIBA, A.; NEPOVIMOVA, E.; KUČA, Kamil; RAMALHO, T.C. and LA, Porta F.A.. Carbon dots in the center of the spotlight: A full evaluation of their synthesis and understanding of their fundamental properties and applications. Online.
Materials Today Sustainability. 2024, Vol. 27, no. 100937. ISSN 2589-2347. Available from:
https://www.sciencedirect.com/science/article/pii/S2589234724002732.
Detail KUNČICKÁ, Lenka and KOCICH, Radim. High strain rate induced shear banding within additively manufactured AISI 316L.
Materials letters. 2024, Vol. 363, no. květen 2024. ISSN 0167-577X.
Detail KUNČICKÁ, Lenka; WALEK, Josef and KOCICH, Radim. Microstructure Development of Powder-Based Cu Composite During High Shear Strain Processing. Online.
Metals. 2024, Vol. 14, no. 12. ISSN 2075-4701. Available from:
https://doi.org/10.3390/met14121331.
Detail VONTOROVÁ, Jiřina; NOVÁK, Vlastimil and VÁŇOVÁ, Petra. Low-Carbon Steel Formed by DRECE Method with Hot-Dip Zinc Galvanizing and Potentiodynamic Polarization Tests to Study Its Corrosion Behavior. Online.
Metals. 2024, Vol. 14, no. 9. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/14/9/993.
Detail BALKRISHNA, A.; KUMARI, A.; KUMAR, A.; ARYA, V.; CHAUHAN, A.; UPADHYAY, N.K.; GULERIA, I.; AMAROWICZ, R.; KUMAR, D. and KUČA, Kamil. Biosensors for detection of pesticide residue, mycotoxins and heavy metals in fruits and vegetables: A concise review. Online.
Microchemical Journal. 2024, Vol. 205, no. 205. ISSN 0026-265X. Available from:
https://www.sciencedirect.com/science/article/pii/S0026265X24014048.
Detail BSAWMAII, Laure; GIRAUD, Pascal; EL HABER, Gerges; HALAGAČKA, Lukáš; CHATELON, Jean-Pierre; JAMON, Damien; JOURLIN, Yves and ROYER, Francois. Magneto-plasmonic "switch" device for magnetic field detection. Online.
Nanophotonics. 2024, Vol. 13, no. 2024, p. 1-10. ISSN 2192-8606. Available from:
https://www.degruyter.com/document/doi/10.1515/nanoph-2024-0136/html.
Detail MIČICA, Martin; WRIGHT, Adrien; KOLEJÁK, Pierre; LAZIER, Geoffey; POSTAVA, Kamil; HAWECKER, Jacques; DE VETTER, Anna; TIGNON, Jerome; MANGENEY, Juliette; JAFFRES, Henri; LEBRUN, Romain; TIERCELIN, Nicolas; VANWOLLEGHEM, Mathias and DHILLON, Sukhdeep. Spintronic Terahertz Emitters with integrated metallic terahertz cavities. Online.
Nanophotonics. 2024, Vol. 13, no. 10, p. 1899-1907. ISSN 2192-8606. Available from:
https://www.degruyter.com/document/doi/10.1515/nanoph-2023-0807/html.
Detail OVČAČÍKOVÁ, Hana; MILLER, Jeffrey Stephen; MATĚJKA, Vlastimil; VLČEK, Jozef; BARTONÍČKOVÁ, Eva and JANKOVSKÝ, Ondřej. Characterization of Hybrid Silicate Materials Based on Ceramic Glazes and Waste London Underground Dust. Online.
Open Ceramics. 2024, Vol. 100664, no. 20. ISSN 2666-5395. Available from:
https://doi.org/10.1016/j.oceram.2024.100664.
Detail PARIES, Felix; SELZ, Felix; SANTOS, Cristiane N.; LAMPIN, Jean-François; KOLEJÁK, Pierre; GEOFFREY, Lezier; DAVID, Troadec; NICOLAS, Tiercelin; MATHIAS, Vanwolleghem; AHMED, Addad; TOBIAS, Kampfrath; TOM S., Seifert; GEORG, von Freymann and DANIEL, Molter. Optical damage thresholds of single-mode fiber-tip spintronic terahertz emitters. Online.
Optics Express. 2024, Vol. 32, no. 16, p. 24826-24838. ISSN 1094-4087. Available from:
https://opg.optica.org/oe/fulltext.cfm?uri=oe-32-14-24826&id=552793.
Detail POSTAVA, Kamil; CIOMPA, Marek; KOHUT, Tomáš; DRONG, Mariusz; JEŠKO, Radek; JAFFRÈS, Henri; FÖRDÖS, Tibor; KOTAČKA, Libor and DROUHIN, Henri-Jean. Incoherent phenomena in anisotropic periodic structures: from modeling to experimental demonstration. Online.
Optics Express. 2024, Vol. 32, no. 16, p. 27822-27834. ISSN 1094-4087. Available from:
https://opg.optica.org/oe/abstract.cfm?doi=10.1364/OE.499025.
Detail BJELLAND, Victoria M.; HALE, Nathan; SCHWARZ, Niklas; VALA, Daniel; HØVIK, Jens and KILDEMO, Morten. Diffractive order Mueller matrix ellipsometry for the design and manufacture of polarization beam splitting metasurfaces. Online.
Optics Express. 2024, Vol. 32, no. 1, p. 703-721. ISSN 1094-4087. Available from:
https://opg.optica.org/oe/fulltext.cfm?uri=oe-32-1-703&id=544777.
Detail GAERNER, Maik; SILBER, Robin; PETERS, Tobiáš; HAMRLE, Jaroslav and KUSCHEL, Timo. Cubic magneto-optic Kerr effect in Ni (111) thin films with and without twinning.
Physical Review Applied. 2024, Vol. 22, no. 2, p. Article number 024066. ISSN 2331-7019.
Detail VILAMOVÁ, Zuzana; SAMPAIO, Maria José; SVOBODA, Ladislav; BEDNÁŘ, Jiří; ŠIMONOVÁ, Zuzana; DVORSKÝ, Richard; SILVA, Claudia Gomes and FARIA, Joaquím Luís. Enhancing photocatalytic g-C3N4/PVDF membranes through new insights into the preparation methods.
Polymer. 2024, Vol. 307, . ISSN 0032-3861.
Detail HOLEŠOVÁ, Sylva; ČECH BARABASZOVÁ, Karla; HUNDÁKOVÁ, Marianna; KRATOŠOVÁ, Gabriela; KALOČ, Václav; JOSZKO, Kamil and GZIK-ZROSKA, Bożena. Comprehensive study of antimicrobial polycaprolactone/clay nanocomposite films: Preparation, characterization, properties and degradation in simulated body fluid. Online.
Polymer Composites. 2024, Vol. 45, no. 10, p. 9280-9298. ISSN 0272-8397. Available from:
https://4spepublications.onlinelibrary.wiley.com/doi/10.1002/pc.28409.
Detail PUSTĚJOVSKÁ, Pavlína; SIKORA, Michal; JURSOVÁ, Simona; PUSTĚJOVSKÁ, Kristýna and KARDAS, Edyta. Coke Substitution with Anthracite in Sintering Production. Online.
Processes. 2024, Vol. 12, no. 3, p. 440. ISSN 2227-9717. Available from:
https://www.mdpi.com/2227-9717/12/3/440.
Detail SLANCOVÁ, Iveta and PLURA, Jiří. Information Inputs and Outputs of Quality Planning Processes and the Possibilities of Their Improvement through Digital. Online.
Quality Innovation Prosperity - Kvalita Inovácia Prosperita. 2024, Vol. 28, no. 2, p. 76-98. ISSN 1335-1745. Available from:
https://www.qip-journal.eu/index.php/QIP/article/view/2023.
Detail MICHALSKA, Monika Kinga; PAVLOVSKÝ, Jiří; SCHOLTZOVA, Eva; SKORNA, Peter; MATĚJKA, Vlastimil; BOCHENEK, Kamil; JAIN, Amrita; CHIDA, Koki; YOSHII, Takeharu and NISHIHARA, Hirotomo. A facile approach for fabricating g-C3N4-based materials as metal-free photocatalysts. Online.
Results in Engineering. 2024, Vol. 24, no. 24. ISSN 2590-1230. Available from:
https://doi.org/10.1016/j.rineng.2024.103109.
Detail KHATAMI, Fahimeh; DE BERNARDI, Paola; VILAMOVÁ, Šárka; CAGNO, Enrico and RICCIARDI, Francesca. Innovation ecosystem for smart product: empirical quantification of its key dimensions in SMEs of 21 European countries. Online.
Review of Managerial Science. 2024, Vol. 18, no. 9. ISSN 1863-6683. Available from:
https://link.springer.com/article/10.1007/s11846-024-00763-z.
Detail VILAMOVÁ, Zuzana; ŠIMONOVÁ, Zuzana; BEDNÁŘ, Jiří; MIKEŠ, Petr; CIESLAR, Miroslav; SVOBODA, Ladislav; DVORSKÝ, Richard; ROSENBERGOVA, Katerina and KRATOŠOVÁ, Gabriela. Silver-loaded poly(vinyl alcohol)/polycaprolactone polymer scaffold as a biocompatible antibacterial system. Online.
Scientific Reports. 2024, Vol. 14, no. 1. ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-024-61567-5.
Detail MICHALSKA, Monika Kinga; PAVLOVSKÝ, Jiří; SIMHA MARTYNKOVÁ, Gražyna; KRATOŠOVÁ, Gabriela; HORNOK, V.; NAGY, P.B.; NOVÁK, Vlastimil and SZABO, T.. Comparative study of photocatalysis with bulk and nanosheet graphitic carbon nitrides enhanced with silver. Online.
Scientific Reports. 2024, Vol. 14, no. 1. ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-024-62291-w.
Detail PRAUS, Petr. Analysis of journal rankings confirms that more cited articles contain more references.
Scientometrics. 2024, Vol. 129, no. 11, p. 7153-7160. ISSN 0138-9130.
Detail PAWLENKA, Tomáš; ŠKUTA, Jaromír; TŮMA, Jiří and JURÁNEK, Martin. Development of capacitive sensors for measuring vibrations and small displacements of a high-speed rotating machines for use in active vibration control systems.
Sensors and Actuators, A: Physical. 2024, Vol. 365, no. 1. ledna 2024. ISSN 0924-4247.
Detail DVORSKÝ, Richard; BEDNÁŘ, Jiří; VILAMOVÁ, Zuzana; ŠIMONOVÁ, Zuzana and SVOBODA, Ladislav. New approach to assessing nanofiber-based air filters efficiency across variable airflow velocities. Online.
Separation and Purification Technology. 2024, Vol. 360, no. 360. ISSN 1383-5866. Available from:
https://www.sciencedirect.com/science/article/pii/S1383586624047415.
Detail HOFRICHTEROVÁ, Lucie. Cirkulární ekonomika spojuje inovace s udržitelností.
Slévárenství. 2024, Vol. 4/2024, no. 4/204, p. 224-226. ISSN 0037-6825.
Detail KIELAR, Šimon. Rozdílné principy mísení a jejich vliv na vlastnosti bentonitové směsi.
Slévárenství. 2024, no. 4-20224, p. 227-230. ISSN 0037-6825.
Detail SNIEGOŇ, Michal; CHUDOBOVÁ, Lucie and CIESLAR, Lukáš. Optimalizace složení pánvové strusky za účelem efektivního odsíření oceli.
Slévárenství. 2024, Vol. 2024, no. 1, p. 27-29. ISSN 0037-6825.
Detail ZÁVRBSKÁ, Martina. Průzkum přístupu slévárenských podniků k řízení nákladů v České republice.
Slévárenství. 2024, Vol. 2024, no. 2, p. 79-82. ISSN 0037-6825.
Detail TOKARSKÝ, Jonáš and MOLEK, Jonáš. Overlap and rotate - a simple method for predicting out-of-plane and in-plane orientations of heteroepitaxial thin films.
Surfaces and Interfaces. 2024, Vol. 46, no. březen 2024, p. 1-13. ISSN 2468-0230.
Detail BARGONI, Augusto; SANTORO, Gabriele; PETRUZZELLI, Antonio Messeni and FERRARIS, Alberto. Growth hacking: A critical review to clarify its meaning and guide its practical application. Online.
Technological Forecasting and Social Change. 2024, Vol. 200, no. 2024. ISSN 0040-1625. Available from:
https://www.sciencedirect.com/science/article/pii/S0040162523007965.
Detail CHILOECHES, Alberto; ZÁGORA, Jakub; PLACHÁ, Daniela; D. T. TORRES, Marcelo; DE LA FUENTE-NUNEZ,, Cesar; LÓPEZ-FABAL, Fátima; GIL-ROMERO, Yolanda; FERNÁNDEZ-GARCÍA, Raquel; FERNÁNDEZ-GARCÍA, Marta; ECHEVERRÍA, Coro and MUÑOZ-BONILLA, Alexandra. Synergistic Combination of Antimicrobial Peptides and Cationic Polyitaconates in Multifunctional PLA Fibers. Online.
ACS Applied Bio Materials. 2023, Vol. 6, no. 11, p. 4805-4813. ISSN 2576-6422. Available from:
https://pubs.acs.org/doi/10.1021/acsabm.3c00576.
Detail WANG, Zifan; CHEN, Jingwei; KOCICH, Radim; TARDIF, Samuel; DOLBNYA, Igor P; KUNCICKA, Lenka; MICHA, Jean-Sebastien; LIOGAS, Konstantinos; MAGDYSYUK, Oxana, V; SZURMAN, Ivo and KORSUNSKY, Alexander M. Grain Structure Engineering of NiTi Shape Memory Alloys by Intensive Plastic Deformation. Online.
ACS applied materials & interfaces. 2023, Vol. 14, no. 27, p. 31396–31410. ISSN 1944-8244. Available from:
https://pubs.acs.org/doi/epdf/10.1021/acsami.2c05939.
Detail WAWAK, Slavomir; SÜTŐOVÁ, Andrea; VYKYDAL, David and HALFAROVÁ, Petra. Factors affecting Quality 4.0 implementation in Czech, Slovak and Polish organizations: Preliminary research. Online.
Advances in Production Engineering And Management. 2023, Vol. 18, no. 3, p. 345-356. ISSN 1854-6250. Available from:
https://apem-journal.org/Archives/2023/Abstract-APEM18-3_345-356.pdf.
Detail TOŠENOVSKÝ, Filip. A Simulation-Based Testing of Difference in the Means of Gamma-Distributed Positive Quantities. Online.
Applied Sciences. 2023, Vol. 13, no. 17. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/13/17/9497.
Detail ČARNOGURSKÁ, Mária; PŘÍHODA, Miroslav; LÁZÁR, Marián; JASMINSKÁ, Natália; BRESTOVIČ, Tomáš and PUŠKÁR, Michal. A Similarity Model of Specific Heat Loss Determined by Dimensional Analysis. Online.
Applied Sciences. 2023, Vol. 13, no. 14, p. 10 July 2023. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/13/14/8055.
Detail KLEGOVÁ, Anna; PACULTOVÁ, Kateřina; KIŠKA, Tomáš; GRYBOŚ, J.; SOJKA, Z. and OBALOVÁ, Lucie. On the optimal Cs/Co ratio responsible for the N2O decomposition activity of the foam supported cobalt oxide catalysts.
Arabian Journal of Chemistry. 2023, Vol. 16, no. 12. ISSN 1878-5352.
Detail SCHINDLER, Ivo; KAWULOK, Petr; KONEČNÁ, Kateřina; SAUER, Michal; NAVRÁTIL, Horymír; OPĚLA, Petr; KAWULOK, Rostislav and RUSZ, Stanislav. SIMULATION OF HOT CONTINUOUS ROLLING OF A PLAIN CARBON STEEL USING THE MAXSTRAIN II® MULTI-AXIS DEFORMATION SYSTEM. Online.
Archives of Metallurgy and Materials. 2023, Vol. 68, no. 2, p. 741-747. ISSN 1733-3490. Available from:
https://journals.pan.pl/dlibra/publication/142456/edition/127413/content.
Detail LICHÁ, Ivana; BAŠISTOVÁ, Martina; LICHÝ, Petr; MERTA, Václav; RADKOVSKÝ, Filip and JEZIERSKI, Jacek. TECHNOLOGY OF PRODUCTION OF MOLD FILLING MATERIAL FOR SPECIFIC PURPOSES IN THE FIELD OF METALLIC FOAM CASTING. Online.
Archives of Metallurgy and Materials. 2023, Vol. 68, no. 2, p. 757-763. ISSN 1733-3490. Available from:
https://doi.org/10.24425/amm.2023.142458.
Detail PLESNÍK, Lukáš; ČECH BARABASZOVÁ, Karla; HOLEŠOVÁ, Sylva; PEIKERTOVÁ, Pavlína; SIMHA MARTYNKOVÁ, Gražyna and NAKONIECZNY, D.S.. Nanocomposite PVDF Membrane for Battery Separator Prepared via Hot Pressing. Online.
Batteries. 2023, Vol. 9, no. 8. ISSN 2313-0105. Available from:
https://www.mdpi.com/2313-0105/9/8/398.
Detail PRAUS, Petr. 2D/2D composites based on graphitic carbon nitride and MXenes for photocatalytic reactions: a critical review.
Carbon Letters. 2023, Vol. 34, no. 1, p. 227-245. ISSN 1976-4251.
Detail PRAUS, Petr. Photocatalytic Nitrogen Fixation Using Graphitic Carbon Nitride: A Review.
ChemistrySelect. 2023, Vol. 8, no. 1, p. 1-9. ISSN 2365-6549.
Detail VRÁBLOVÁ, Martina; SMUTNÁ, Kateřina; KOUTNÍK, Ivan; MARKOVÁ, Dominika; VRÁBL, Daniel; GÓRECKI, Kamil Maciej and ŽEBRÁK, Radim. A novel approach for measuring membrane permeability for organic compounds via surface plasmon resonance detection. Online.
Chemosphere. 2023, Vol. 312, no. 1. ISSN 0045-6535. Available from:
https://www.sciencedirect.com/science/article/pii/S004565352203658X.
Detail HALFAR, Jan; ČABANOVÁ, Kristina; VÁVRA, Karel; DELONGOVÁ, Patricie; MOTYKA, Oldřich; ŠPAČEK, Richard; KUKUTSCHOVÁ, Jana; ŠIMETKA, Ondřej and HEVIÁNKOVÁ, Silvie. Microplastics and additives in patients with preterm birth: The first evidence of their presence in both human amniotic fluid and Placenta. Online.
Chemosphere. 2023, Vol. 2023, no. 343, p. 1-10. ISSN 0045-6535. Available from:
https://www.sciencedirect.com/science/article/pii/S0045653523025717.
Detail RAJHELOVÁ, Hana; PEIKERTOVÁ, Pavlína; KUZNÍKOVÁ, Ĺubomíra; MOTYKA, Oldřich; PLACHÁ, Daniela; MAMULOVÁ KUTLÁKOVÁ, Kateřina; ČECH BARABASZOVÁ, Karla; THOMASOVÁ, Barbora; VACULÍK, Miroslav and KUKUTSCHOVÁ, Jana. Alteration of Hordeum vulgare and Sinapis alba germination and early growth in response to airborne low-metallic automotive brake wear debris.
Chemosphere. 2023, Vol. 345, no. December. ISSN 0045-6535.
Detail WANG, Yingbin; YUAN, Zhenyi; YANG, Jie; HE, Yan; HE, Xingyang; SU, Ying and STRNADEL, Bohumír. Utilization of ultra-fine copper slag to prepare eco-friendly ultrahigh performance concrete by replacing silica fume. Online.
Construction and Building Materials. 2023, Vol. 406, no. 406. ISSN 0950-0618. Available from:
https://www.sciencedirect.com/science/article/pii/S0950061823031938.
Detail WANG, Yingbin; WANG, Jiafei; WU, Yejun; LI, Yang; HE, Xingyang; SU, Ying and STRNADEL, Bohumír. Preparation of sustainable ultra-high performance concrete (UHPC) with ultra-fine glass powder as multi-dimensional substitute material. Online.
Construction and Building Materials. 2023, Vol. 401, no. 401. ISSN 0950-0618. Available from:
https://www.sciencedirect.com/science/article/pii/S0950061823025734.
Detail VODÁREK, Vlastimil; HOLESINSKY, Jan; KUBON, Zdenek; PALUPČÍKOVÁ, Renáta; HRADEČNÝ, Kryštof; VÁŇOVÁ, Petra and HLINKA, Josef. The Effect of Vanadium on Modified Z-Phase Characteristics in Austenitic Steels. Online.
Crystals. 2023, Vol. 13, no. 4. ISSN 2073-4352. Available from:
https://www.mdpi.com/2073-4352/13/4/676.
Detail NOVÁK, Dalibor; ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; MATÝSEK, Dalibor and PEIKERTOVÁ, Pavlína. Wetting of graphite and platinum substrate by oxide system with graded B2O3 content. Online.
Crystals. 2023, Vol. 13, no. 12. ISSN 2073-4352. Available from:
https://www.mdpi.com/2073-4352/13/12/1618.
Detail VODÁREK, Vlastimil; KUBOŇ, Zdeněk; VÁŇOVÁ, Petra; PALUPČÍKOVÁ, Renáta and LANGER, Svatopluk. Creep Resistance and Microstructure Evolution in HR3C-P92 Heterogeneous Welds.
Defect and Diffusion Forum. 2023, Vol. 422, p. 51-56. ISSN 1012-0386.
Detail SMÝKALOVÁ, Aneta; SŁOWIK, Grzegorz; KOŠTEJN, Martin; KAWULOKOVÁ, Monika; FONIOK, Kryštof; NOVÁK, Vlastimil and PRAUS, Petr. Graphitic carbon nitride/xylene soot metal-free nanocomposites for photocatalytic degradation of organic compounds.
Diamond and Related Materials. 2023, Vol. 139, no. 9, p. 110434. ISSN 0925-9635.
Detail OLŠOVSKÁ, Eva; ČABANOVÁ, Kristina; MOTYKA, Oldřich; BIELNIKOVÁ KRYŠTOFOVÁ, Hana; MATĚJKOVÁ, Petra; VOVES, Jiří; ŽIDLÍK, Vladimír; MADEJA, Roman; DEMEL, Jiří; HALFAR, Jan and KUKUTSCHOVÁ, Jana. Simple method for quantification of metal-based particles in biopsy samples of patients with long bone implants - pilot study.
Environmental Toxicology and Pharmacology. 2023, Vol. 103, no. october. ISSN 1382-6689.
Detail BIELNIKOVÁ-KRYŠTOFOVÁ, Hana; MOTYKA, Oldřich; ŽIDLÍK, Vladimír; ŽIAK, Dušan; SZOTKOVSKÁ, Iveta; ŠKARDA, Jozef; VOVES, Jiří; POMETLOVÁ, Jana; PLEVA, Leopold; HAVLÍČEK, Miroslav and ČABANOVÁ, Kristina. Immunohistochemical evaluation of tissues following bone implant extraction from upper and lower limb. Online.
HISTOLOGY AND HISTOPATHOLOGY. 2023, Vol. 38, no. 10, p. 1119-1127. ISSN 0213-3911. Available from:
https://www.hh.um.es/pdf/Vol_38/38_10/Bielnikova-Krystofova-38-1119-1127-2023.pdf.
Detail ŠPIČKOVÁ, Dagmar; ŠPIČKA, Ivo and DROBISZ, Zbyszek. Model level control of continuous furnaces - Hutnické listy_1-3/2023.
Hutnické listy. 2023, Vol. LXXVI, no. 1-3/2023, p. 30-35. ISSN 0018-8069.
Detail DOSTÁL, Miroslav. Zpracování náročných jakostí ocelí pomocí vakuové metalurgie s cílem řízení obsahu vodíku výpočtovým modelem.
Hutnické listy. 2023, Vol. 76, no. 1-3, p. 9-14. ISSN 0018-8069.
Detail BÍLKOVÁ, Tereza; PACULTOVÁ, Kateřina; KARÁSKOVÁ, Kateřina; FRIDRICHOVÁ, Dagmar; JIRATOVA, Kvetuse; KOSTEJN, Martin; SLOWIK, Grzegorz; RITZ, Michal; HANEDA, Masaaki and OBALOVÁ, Lucie. Surface Potassium Promotion of Co4MnAlOx in Direct NO Decomposition Generates the Same Type of Active Sites as Bulk Promotion.
Industrial and engineering chemistry research. 2023, Vol. 62, no. 31, p. 12053-12442. ISSN 0888-5885.
Detail KLEGOVÁ, Anna; PACULTOVÁ, Kateřina; KIŠKA, Tomáš and OBALOVÁ, Lucie. How Loading of Co3O4-Cs on an Open-Cell Foam Influences N2O Decomposition.
Industrial and engineering chemistry research. 2023, Vol. 62, no. 3. ISSN 0888-5885.
Detail HEMMAT, Minoosh; AYARI, Sabrine; MIČICA, Martin; VERGNET, Hadrien; GUO, Shasha; ARFAOUI, Mehdi; YU, Xuechao; VALA, Daniel; WRIGHT, Adrien; POSTAVA, Kamil; MANGENEY, Juliette; CAROSELLA, Francesca; JAZIRI, Sihem; WANG, Qi Jie; ZHENG, Liu; TIGNON, Jérome; FERREIRA, Robson; BAUDIN, Emmanuel and DHILLON, Sukhdeep. Layer-controlled nonlinear terahertz valleytronics in two-dimensional semimetal and semiconductor PtSe2. Online.
Infomat. 2023, Vol. 5, no. 11. ISSN 2567-3165. Available from:
https://onlinelibrary.wiley.com/doi/full/10.1002/inf2.12468.
Detail ŠKUTA, Radim; KOSTURA, Bruno; RITZ, Michal; FONIOK, Kryštof; PAVLOVSKÝ, Jiří and MATÝSEK, Dalibor. Comparing the photocatalytic performance of GO/ZnO and g-C3N4/ZnO composites prepared using metallurgical waste as a source of zinc.
Inorganic Chemistry Communication. 2023, Vol. 152, no. June 2023, p. 110728. ISSN 1387-7003.
Detail NÉGYESI, Martin; KRAUS, Martin; MAREŠ, Vratislav; KWON, Dongil and STRNADEL, Bohumír. Creep damaged microstructure and mechanical properties of Cr–Mo–V steel subjected to long-term service exposures.
International journal of pressure vessels and piping. 2023, Vol. 206, no. December, p. 105085. ISSN 0308-0161.
Detail WANG, Yingbin; YANG, Jie; SU, Ying; HE, Xingyang and STRNADEL, Bohumír. The Effect of Wet-grinding on the Properties of Glass Powder and Its Application in Cement Based Materials. Online.
Journal Wuhan University of Technology, Materials Science Edition. 2023, Vol. 38, no. 6, p. 1372-1381. ISSN 1000-2413. Available from:
https://link.springer.com/article/10.1007/s11595-023-2831-0.
Detail ŽIVOTSKÝ, Ondřej; GEMBALOVÁ, Lucie; JIRÁSKOVÁ, Yvonna; SZURMAN, Ivo; ČEGAN, Tomáš; MALINA, Ondřej; KURIPLACH, Jan and ČÍŽEK, Jakub. Microstructural and magnetic properties of Mn2FeSi and Mn2FeAl alloys prepared in bulk form.
Journal of Alloys and Compounds. 2023, Vol. 947, no. 25 June 2023, p. 169672(1)-169672(11). ISSN 0925-8388.
Detail DVORSKÝ, Richard; KUKUTSCHOVÁ, Jana; PAGÁČ, Marek; SVOBODA, Ladislav; ŠIMONOVÁ, Zuzana; PETEREK DĚDKOVÁ, Kateřina; BEDNÁŘ, Jiří; MENDES, Rafael; MATÝSEK, Dalibor; MALINA, Ondřej; TUČEK, Jiří; VILAMOVÁ, Zuzana; KISELEV, Sergei; GEMMING, Thomas and FILIP, Peter. Analysis and Modelling of Single Domain Core-Shell (αFeNi/chromite) Nanoparticles Emitted during Selective Laser Melting, and their Magnetic Remanence. Online.
Journal of Cleaner Production. 2023, Vol. 400, no. MAY 10 2023, p. 1-10. ISSN 0959-6526. Available from:
https://www.sciencedirect.com/science/article/pii/S0959652623008466?via%3Dihub.
Detail BENDA, Vojtěch; KUBÍČEK, Jan; MADEJA, Roman; OCZKA, David; ČERNÝ, Martin and DOSTÁLOVÁ, Kamila. Design of Proposed Software System for Prediction of Iliosacral Screw Placement for Iliosacral Joint Injuries Based on X-ray and CT Images. Online.
Journal of Clinical Medicine. 2023, Vol. 12, no. 6. ISSN 2077-0383. Available from:
https://www.mdpi.com/2077-0383/12/6/2138.
Detail DĚDEK, I.; BARTUSEK, Stanislav; DVOŘÁČEK, J.J.; NEČAS, Jan; PETRUŠ, J.; JAKUBEC, P.; KUPKA, V. and OTYEPKA, Michal. Maximizing the electrochemical performance of supercapacitor electrodes from plastic waste. Online.
Journal of Energy Storage. 2023, Vol. 72, no. NOV 30 2023. ISSN 2352-152X. Available from:
https://www.sciencedirect.com/science/article/pii/S2352152X23020571.
Detail JANSA, Jan; VOLODARSKAJA, Anastasia; HLINKA, Josef; ZARYBNICKA, Lucie; POLZER, Stanislav; KRAUS, Martin; HAJNYŠ, Jiří; SCHWARZ, David and PAGÁČ, Marek. Corrosion and material properties of 316L stainless steel produced by material extrusion technology.
Journal of Manufacturing Processes. 2023, Vol. 88, no. 88, p. 232-245. ISSN 1526-6125.
Detail ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; ROSYPALOVÁ, Silvie; HEGER, Milan; ZIMNÝ, Ondřej; MATÝSEK, Dalibor; LEINWEBEROVÁ, Sára and NOVÁK, Dalibor. On rheological properties of environmentally friendly inorganic systems and their modeling by artificial neural networks. Online.
Journal of Materials Research and Technology. 2023, Vol. 22, no. JAN-FEB, p. 1410-1422. ISSN 2238-7854. Available from:
https://www.sciencedirect.com/science/article/pii/S2238785422019032.
Detail MAN, Licu; BERNHARD, Michael; KAWULOKOVÁ, Monika; WALEK, Josef; KERN, Maximilian; ZLÁ, Simona; PRESOLY, Peter; SMETANA, Bedřich; TKADLEČKOVÁ, Markéta; XU, Guang; KANG, You-Bae and BERNHARD, Christian. Decomposition of γ-Fe in 0.4C–1.8Si-2.8Mn-0.5Al steel during a continuous cooling process: A comparative study using in-situ HT-LSCM, DSC and dilatometry. Online.
Journal of Materials Research and Technology. 2023, Vol. 24, no. květen-červen, p. 3534-3547. ISSN 2238-7854. Available from:
https://www.sciencedirect.com/science/article/pii/S2238785423007020?pes=vor.
Detail VEVERKA, Jakub; VILÉMOVÁ, Monika; LUKÁČ, František; KADZIELAWA, Andrzej Piotr; LEGUT, Dominik; VONTOROVÁ, Jiřina; KOZLÍK, Jiří and CHRÁSKA, Tomáš. Decreasing the W-Cr solid solution decomposition rate: Theory, modelling and experimental verification.
Journal of Nuclear Materials. 2023, Vol. 576, no. April. ISSN 0022-3115.
Detail NÉGYESI, Martin; ŽÁKOVÁ, Veronika; MAREŠ, Vratislav; STRNADEL, Bohumír; LACROIX, V.; CHOI, M.-J. and KWON, D.. Assessment of tensile properties across pressure vessel nozzle to primary piping safe-end employing instrumented indentation testing.
Journal of Nuclear Materials. 2023, Vol. 585, no. listopad. ISSN 0022-3115.
Detail SMÝKALOVÁ, Aneta; KINNERTOVÁ, Eva; SLOVÁK, Václav and PRAUS, Petr. Metal-free hybrid nanocomposites of graphitic carbon nitride and char: Synthesis, characterisation and photocatalysis under visible irradiation.
Journal of the Taiwan Institute of Chemical Engineers. 2023, no. 8.4.2023, p. 1-12. ISSN 1876-1070.
Detail GREGER, Miroslav; KWARTENG, Oskar; PETRŽELA, Jiří and JUHAS, Miroslav. Progresivní technologie kování zdvihů pro zalomené hřídele. Online.
Kovárenství. 2023, Vol. 78, no. březen, p. 11-17. ISSN 1213-9289. Available from:
http://kovarenstvi.cz/cs/archiv/c78.html.
Detail ŠMACH, Jiří; HALAMA, Radim; MAREK, Martin; ŠOFER, Michal; LIBOR, Kovář and PETR, Matušek. Two Contributions to Rolling Contact Fatigue Testing Considering Different Diameters of Rail and Wheel Discs. Online.
Lubricants. 2023, Vol. 11, no. 12, p. 504. ISSN 2075-4442. Available from:
https://www.mdpi.com/2075-4442/11/12/504/pdf?version=1701319966.
Detail SAUER, Michal; FABIK, Richard; SCHINDLER, Ivo; KAWULOK, Petr; OPĚLA, Petr; KAWULOK, Rostislav; VODÁREK, Vlastimil and RUSZ, Stanislav. Analysis of the Microstructure Development of Nb-Microalloyed Steel during Rolling on a Heavy-Section Mill. Online.
MATERIALS. 2023, Vol. 16, no. 1. ISSN 1996-1944. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:000910046300001.
Detail BAŠISTOVÁ, Martina; RADKOVSKÝ, Filip; KROUPOVÁ, Ivana and LICHÝ, Petr. Dilatation of New Progressive Hybrid Sand and Its Effect on Surface Structure, Roughness, and Veining Creation within Grey Cast Iron. Online.
MATERIALS. 2023, Vol. 16, no. 5. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/5/2004.
Detail SITEK, Ryszard; KULIKOWSKI, Krzysztof; PARADOWSKI, Krystian; GANCARCZYK, Kamil; LOSERTOVÁ, Monika; KOBAYASHI, Akira; MONETA, Joanna and KAMINSKI, Janusz. Influence of Ion Nitriding on Microstructure and Properties of Haynes 282 Nickel Superalloy Specimens Produced Using DMLS Technique. Online.
MATERIALS. 2023, Vol. 16, no. 14. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/14/5020.
Detail VODÁREK, Vlastimil; KUBOŇ, Zdeněk; PALUPČÍKOVÁ, Renáta; HRADEČNÝ, Kryštof and VÁŇOVÁ, Petra. Creep Behaviour and Microstructure Evolution in Super 304H–P92 Heterogeneous Welds.
MATERIALS AT HIGH TEMPERATURES. 2023, no. 2023. ISSN 0960-3409.
Detail NOVAK, Pavel; DUDA, Jiri; PRUSA, Filip; SKOTNICOVÁ, Kateřina; SZURMAN, Ivo and SMETANA, Bedřich. Synthesis of FeSi-FeAl Composites from Separately Prepared FeSi and FeAl Alloys and Their Structure and Properties. Online.
Materials. 2023, Vol. 16, no. 24, p. "nestránkováno". ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/24/7685.
Detail VELIČKA, Marek; PYSZKO, René; MACHŮ, Mario; BURDA, Jiří; KUBÍN, Tomáš; OVČAČÍKOVÁ, Hana and RIGO, David. Research on Solid Shell Growth during Continuous Steel Casting. Online.
Materials. 2023, Vol. 16, no. 15, p. 1-18. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/15/5302.
Detail HLINKA, Josef; DOSTÁLOVÁ, Kamila; ČABANOVÁ, Kristina; MADEJA, Roman; FRYDRYSEK, Karel; KOUTECKY, Jan; RYBKOVA, Zuzana; MALACHOVA, Katerina and UMEZAWA, Osamu. Electrochemical, Biological, and Technological Properties of Anodized Titanium for Color Coded Implants. Online.
Materials. 2023, Vol. 16, no. 2. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/2/632.
Detail NAG, Akash; SRIVASTAVA, Madhulika; PETRŮ, Jana; VÁŇOVÁ, Petra; SRIVASTAVA, Ashish Kumar and HLOCH, Sergej. Comparison of Continuous and Pulsating Water Jet during Piercing of Ductile Material. Online.
Materials. 2023, Vol. 16, no. 9. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/9/3558.
Detail ROSYPALOVÁ, Silvie; ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; KAWULOKOVÁ, Monika; VÁŇOVÁ, Petra; KONEČNÁ, Kateřina and ĎURICOVÁ, Barbora. Rheological Characteristics of Fe-C-Cr(Ni) Alloys. Online.
Materials. 2023, Vol. 16, no. 7. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/7/2656.
Detail CANELO-YUBERO, D.; KOCICH, Radim; ŠAROUN, J. and STRUNZ, P.. Residual Stress Distribution in a Copper-Aluminum Multifilament Composite Fabricated by Rotary Swaging. Online.
Materials. 2023, Vol. 16, no. 5. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/5/2102.
Detail OPĚLA, Petr; BENČ, Marek; KOLOMY, Stepan; JAKUBEK, Zdeněk and BERANOVÁ, Denisa. High Cycle Fatigue Behaviour of 316L Stainless Steel Produced via Selective Laser Melting Method and Post Processed by Hot Rotary Swaging. Online.
Materials. 2023, Vol. 16, no. 9. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/16/9/3400.
Detail MANIPPADY, Sai Rashmi; MICHALSKA, Monika Kinga; KRAJEWSKI, Marcin; BOCHENEK, Kamil; BASISTA, Michal; ZASZCZYNSKA, Angelika; CZEPPE, Tomasz; ROGAL, Lukasz and JAIN, Amrita. One-step synthesis of a sustainable carbon material for high performance supercapacitor and dye adsorption applications. Online.
Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 2023, Vol. 297, no. November. ISSN 0921-5107. Available from:
https://www.sciencedirect.com/science/article/pii/S0921510723005081.
Detail WANG, Zifang; ZHANG, Yunlan; LIOGAS, Konstantinos; CHEN, Jingwei; VAUGHAN, Gabin B.M.; KOCICH, Radim; KUNČICKÁ, Lenka; UZUN, Fatih; YOU, Zhong and KORSUNSKY, Alexander M.. In situ synchrotron X-ray diffraction analysis of two-way shape memory effect in Nitinol. Online.
Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing. 2023, Vol. 878, no. 878. ISSN 0921-5093. Available from:
https://www.scopus.com/record/display.uri?eid=2-s2.0-85161271457&origin=resultslist&sort=plf-f&src=s&st1=Kocich%2cR.&sid=47ce0576970abcf30bb26d9b99432999&sot=b&sdt=b&sl=23&s=AUTHOR-NAME%28Kocich%2c+R.%29&relpos=1&citeCnt=0&searchTerm=.
Detail CHEN, Wei; LI, Ling; LAI, Zhihui; HE, Xingyang; SU, Ying; ZHENG, Zhengqi and STRNADEL, Bohumír. Simultaneously enhanced mechanical and electromagnetic interference shielding properties of steel slag-recycled carbon fiber cementitious composites via wet-grinding process.
Materials and Structures/Materiaux et Constructions. 2023, Vol. 56, no. 10. ISSN 1359-5997.
Detail LABAJ, I; SKALKOVA, P; KOPAL, I; VRŠKOVA, J; HARNIČÁROVÁ, M; VALÍČEK, J; BOSKO, P and DOBROVSKÁ, Jana. Study of the influence of Chitosan on selected properties of elastomeric blendsUntersuchung des Einflusses von Chitosan auf ausgewahlte Eigenschaften von Elastomermischungen.
Materialwissenschaft und Werkstofftechnik. 2023, Vol. 54, no. 4, p. 429-440. ISSN 0933-5137.
Detail JANÍK, Róbert; KOHUTIAR, Marcel; SKALKOVÁ, Petra; PAJTÁŠOVÁ, Mariana; LABAJ, Ivan; ŠULCOVÁ, Jana and DOBROVSKÁ, Jana. Modification process of selected thermoplastics with cold plasma and evaluation of changes in their properties.
Materialwissenschaft und Werkstofftechnik. 2023, Vol. 54, no. 4, p. 401-414. ISSN 0933-5137.
Detail WALEK, Josef; TKADLEČKOVÁ, Markéta; VELIČKA, Marek; MACHŮ, Mario; CUPEK, Jiří; HUCZALA, Tomas; CIBULKA, Jiri; RŮŽIČKA, Jan and MICHALEK, Karel. Physical Experiments and Numerical Simulations of the Influence of Turbulence Inhibitors and the Position of Ladle Shroud on the Steel Flow in an Asymmetric Five-Strand Tundish. Online.
Metals. 2023, Vol. 13, no. 11. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/13/11/1821.
Detail VOLODARSKAJA, Anastasia; HRADEČNÝ, Kryštof; PALUPČÍKOVÁ, Renáta; VÁŇOVÁ, Petra and VODÁREK, Vlastimil. Microstructure Evolution in a GOES Thin Strip. Online.
Metals. 2023, Vol. 13, no. 1. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/13/1/51.
Detail VLČEK, Jozef; OVČAČÍKOVÁ, Hana; VELIČKA, Marek; TOPINKOVÁ, Michaela; BURDA, Jiří and MATĚJKOVÁ, Petra. The Corrosion Effect of Fly Ash from Biomass Combustion on Andalusite Refractory Materials. Online.
Minerals. 2023, Vol. 13, no. 3. ISSN 2075-163X. Available from:
https://doi.org/10.3390/min13030357.
Detail VALÁŠKOVÁ, Marta; BLAHŮŠKOVÁ, Veronika; FILIP EDELMANNOVÁ, Miroslava; MATĚJOVÁ, Lenka; SOUKUP, Karel and PLEVOVÁ, Eva. Clay/Fly Ash Bricks Evaluated in Terms of Kaolin and Vermiculite Precursors of Mullite and Forsterite, and Photocatalytic Decomposition of the Methanol–Water Mixture. Online.
Minerals. 2023, Vol. 13, no. 9. ISSN 2075-163X. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:001072517300001.
Detail MICHALSKA, Monika Kinga; KOZŁOWSKA, A.; LEŚNIEWSKA-MATYS, K.; MALINOWSKA, A.; DIDUSZKO, R.; WIERZBICKA, E.; ZAWISTOWSKA, J. and ROMANIEC, M.. The influence of Dy
3+ ions doping and annealing temperature on structural, morphological, and spectroscopic properties of lanthanum orthovanadate (LaVO4) material. Online.
Optical Materials. 2023, Vol. 142, no. August. ISSN 0925-3467. Available from:
https://www.sciencedirect.com/science/article/pii/S0925346723006900.
Detail PROSTĚJOVSKÝ, Tomáš; KULIŠŤÁKOVÁ, Alena; RELI, Martin; ZEBRAK, Radim and KOČÍ, Kamila. Innovative technology for ammonia abatement from livestock buildings using advanced oxidation processes. Online.
Photochemical and Photobiological Sciences. 2023, no. March. ISSN 1474-905X. Available from:
https://link.springer.com/article/10.1007/s43630-023-00400-w#Sec7.
Detail DRONG, Mariusz; PERINA, Jan, Jr; FÖRDÖS, Tibor; JAFFRES, Henri Y; POSTAVA, Kamil and DROUHIN, Henri-Jean. Spin vertical-cavity surface-emitting lasers with linear gain anisotropy: Prediction of exceptional points and nontrivial dynamical regimes.
Physical Review A. 2023, Vol. 107, no. 3. ISSN 2469-9926.
Detail KANDASAMY, Senthil Kumar; RAVINDARAN, Ramyea; MICHALSKA, Monika Kinga; MUTHUSAMY, Suresh; ALMUTAIRI, Tahani Mazyad; PANCHAL, Hitesh; GORJI, M. R; ALRUBAI, Ali Jawad; MOHAMED, Mohamed A and JABER, Mustafa Musa. Highly carbonized
Prunus dulcis shell-derived activated carbon for high-performance supercapacitor applications.
Polymer Bulletin. 2023, Vol. 80, no. 10, p. 10881-10894. ISSN 0170-0839.
Detail BARTONĚK, Daniel; NÉGYESI, Martin and STRNADEL, Bohumír. EVALUATION OF RESIDUAL STRESS AND TENSILE PROPERTIES OF RAILWAY AXLE USING INSTRUMENTED INDENTATION METHOD. Online.
Powder Metallurgy Progress. 2023, Vol. 22, no. 1, p. 14-24. ISSN 1335-8987. Available from:
https://sciendo.com/article/10.2478/pmp-2022-0003.
Detail PLURA, Jiří; VYKYDAL, David; TOŠENOVSKÝ, Filip and KLAPUT, Pavel. Graphical Tools for Increasing the Effectiveness of Gage Repeatability and Reproducibility Analysis. Online.
Processes. 2023, Vol. 11, no. 1, p. 1-16. ISSN 2227-9717. Available from:
https://www.mdpi.com/2227-9717/11/1/1.
Detail PUSTĚJOVSKÁ, Kristýna; JANOVSKÁ, Kamila and JURSOVÁ, Simona. Alternative Sources of Energy in Transport: A Review. Online.
Processes. 2023, Vol. 11, no. 5. ISSN 2227-9717. Available from:
https://www.mdpi.com/2227-9717/11/5/1517.
Detail PUSTĚJOVSKÁ, Pavlína; BILÍK, Jiří; JURSOVÁ, Simona; KARDAS, Edyta and KONSTANCIAK, Anna. Prediction of the Consumption of Raw Materials and Fuels for the Blast Furnace. Online.
Processes. 2023, Vol. 11, no. 1, p. 1-10. ISSN 2227-9717. Available from:
https://www.mdpi.com/2227-9717/11/1/79.
Detail KLAPUT, Pavel; HERCÍK, Radim; MACHÁČEK, Zdeněk; NOSKIEVIČOVÁ, Darja; DOSTÁL, Vladimír and VYKYDAL, David. Mutual combination of selected principles and technologies of Industry 4.0 and quality management methods - case study. Online.
Quality Engineering. 2023, Vol. 36, no. 2, p. 207-226. ISSN 0898-2112. Available from:
https://www.tandfonline.com/doi/full/10.1080/08982112.2023.2193895.
Detail JAIN, Amrita; ZIAI, Yasamin; BOCHENEK, Kamil; MANIPPADY, Sai Rashmi; PIERINI, Filippo and MICHALSKA, Monika Kinga. Utilization of compressible hydrogels as electrolyte materials for supercapacitor applications. Online.
RSC Advances. 2023, Vol. 13, no. 17, p. 11503-11512. ISSN 2046-2069. Available from:
https://pubs.rsc.org/en/content/articlelanding/2023/ra/d3ra00893b.
Detail KOVÁR, Filip; SMUTNÁ, Kateřina; HRUŠKA, Adam; KOUTNÍK, Ivan and VRÁBLOVÁ, Martina. Adsorption and permeability of heavy metals (Fe, Cu, Pb, Zn, Cr, and Cd) onto the adaxial cuticle of Ficus elastica leaf.
Scientia Horticulturae. 2023, Vol. 321, no. 112315. ISSN 0304-4238.
Detail BROŽOVÁ, Silvie; BROŽ, Jiří and INGALDI, Manuela. Hydrome-metallurgical waste management: Turning metal-enriched waste into valuable resources. Online.
Scientific Journals of the Maritime University of Szczecin - Zeszyty Naukowe Akademii Morskiej w Szczecinie. 2023, Vol. 75, no. 147, p. 107-113. ISSN 1733-8670. Available from:
https://repository.am.szczecin.pl/handle/123456789/2793.
Detail JAYASHREE, P.; MATĚJKA, Vlastimil; LEONARDI, M. and STRAFFELINI, G.. A novel path towards limiting non-exhaust particulate matter emissions of a commercial friction material through the addition of metallurgical slag. Online.
Scientific Reports. 2023, Vol. 13, no. 1. ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-023-27932-6.
Detail MICHALSKA, Monika Kinga; MATĚJKA, Vlastimil; PAVLOVSKÝ, Jiří; PRAUS, Petr; RITZ, Michal; SERENČÍŠOVÁ, Jana; GEMBALOVÁ, Lucie; KORMUNDA, M; FONIOK, Kryštof; RELI, Martin and SIMHA MARTYNKOVÁ, Gražyna. Effect of Ag modification on TiO2 and melem/g-C3N4 composite on photocatalytic performances. Online.
Scientific Reports. 2023, Vol. 13, no. 1. ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-023-32094-6#citeas.
Detail PRAUS, Petr. Empirical relationship between the number of review and research articles. Scientometrics. Online.
Scientometrics. 2023, Vol. 128, no. 2, p. 2201-2209. ISSN 0138-9130. Available from:
https://doi.org/10.1007/s11192-023-04654-0.
Detail WOJNAROVÁ, Petra; RUSÍN, Jiří; BASINAS, Panagiotis; KOŠTEJN, Martin; NĚMEC, Josef; STANOVSKÝ, Petr; KIM, Albert S. and IZÁK, Pavel. Unveiling the potential of composite water-swollen spiral wound membrane for design of low-cost raw biogas purification. Online.
Separation and Purification Technology. 2023, Vol. 326, no. -, p. 1-9. ISSN 1383-5866. Available from:
https://doi.org/10.1016/j.seppur.2023.124783.
Detail CUPEK, Jiří; BILKO, Roman and WALEK, Josef. Fyzikální a numerické modelování odstraňování nekovových vměstků v mezipánvi plynulého odlévání oceli. Online.
Slévárenství. 2023, Vol. 4, no. 1. 12. 2023, p. 202-207. ISSN 0037-6825. Available from:
https://www.casopis-slevarenstvi.cz/.
Detail ZÁVRBSKÁ, Martina. Průzkum úrovně řízení nákladů s akcentem na režijní náklady v slévárenských podnicích v České republice.
Slévárenství. 2023, Vol. 2023, no. 2, p. 70-73. ISSN 0037-6825.
Detail PAWLENKA, Tomáš; JURÁNEK, Martin; KLAUS, Pavel; BESEDA, Marek; BURÁŇ, Michal; SUCHÁNEK, Miroslav; SEHNOUTKA, Petr and KULHÁNEK, Jiří. Compact automatic controlled internal combustion engine cogeneration system based on natural gas with waste heat recovery from the combustion process.
Thermal Science and Engineering Progress. 2023, Vol. 44, no. 1. září 2023, p. 1-12. ISSN 2451-9049.
Detail JAYASHREE, P.; CANDEO, S.; MATĚJKA, Vlastimil; FONIOK, Kryštof; LEONARDI, M. and STRAFFELINI, G.. Study on the effect of the addition of bulk and exfoliated graphitic carbon nitride on the dry sliding behavior of a commercial friction material formulation through pin on disc and subscale dynamometer analysis.
Tribology international. 2023, Vol. 179, no. 108152. ISSN 0301-679X.
Detail JAYASHREE, Priyadarshini; MATĚJKA, Vlastimil; SINHA, Ankur; GIALANELLA, Stefano and STRAFFELINI, Giovanni. A comprehensive study on the particulate matter characteristics of a friction material containing blast furnace slags.
Tribology international. 2023, Vol. 186, . ISSN 0301-679X.
Detail BROŽOVÁ, Kateřina; HALFAR, Jan; ČABANOVÁ, Kristina; MOTYKA, Oldřich; DRABINOVÁ, Silvie; HANUS, Pavel and HEVIÁNKOVÁ, Silvie. The first evidence of microplastic occurrence in mine water: The largest black coal mining area in the Czech Republic. Online.
Water research. 2023, Vol. 244, no. 1 October 2023, p. 1-11. ISSN 0043-1354. Available from:
https://www.sciencedirect.com/science/article/pii/S0043135423009788?via%3Dihub.
Detail JAYASHREE, Priyadarshini; MATĚJKA, Vlastimil; LEONARDI, Mara and STRAFFELINI, Giovanni. The influence of the addition of different kinds of slags on the friction and emission behavior of a commercially employed friction material formulation.
Wear. 2023, Vol. 522, no. 1st June 2023. ISSN 0043-1648.
Detail KOLEJÁK, Pierre; LEZIER, Geoffrey; POSTAVA, Kamil; LAMPIN, Jean François; TIERCELIN, Nicolas and VANWOLLEGHEM, Mathias. 360o Polarization Control of Terahertz Spintronic Emitters Using Uniaxial FeCo/TbCo2/FeCo Trilayers. Online.
ACS Photonics. 2022, Vol. 9, no. 4, p. 1274-1285. ISSN 2330-4022. Available from:
https://doi.org/10.1021/acsphotonics.1c01782.
Detail KOZEL, Roman; VILAMOVÁ, Šárka; PRACHAŘOVÁ, Lenka and SEDLÁKOVÁ, Zuzana. Evaluation of the functionality of bankruptcy models in mining companies. Online.
Acta Montanistica Slovaca. 2022, Vol. 27, no. 3, p. 754-766. ISSN 1335-1788. Available from:
https://actamont.tuke.sk/pdf/2022/n3/15kozel.pdf.
Detail JANOVSKÁ, Kamila; VILAMOVÁ, Šárka; LABOUNEK, Dalibor; KOZEL, Roman and PALA, Tomáš. METHODOLOGY FOR CALCULATING THE COST PRICE OF THE BENDING PROCESS FOR THE NEEDS OF MANUFACTURING LOGISTICS. Online.
Acta logistica. 2022, Vol. 9, no. 4, p. 361-368. ISSN 1339-5629. Available from:
https://actalogistica.eu/index.php?stranka=2022_04.
Detail KUNČICKÁ, Lenka; KOCICH, Radim; NÉMETH, Gergely; DVOŘÁK, Karel and PAGÁČ, Marek. Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion.
Additive Manufacturing. 2022, Vol. 59, no. November, p. 103128. ISSN 2214-8604.
Detail LEZIER, Geoffrey; KOLEJÁK, Pierre; LAMPIN, Jean-Francois; POSTAVA, Kamil; VANWOLLEGHEM, Mathias and TIERCELIN, Nicolas. Fully reversible magnetoelectric voltage controlled THz polarization rotation in magnetostrictive spintronic emitters on PMN-PT. Online.
Applied Physics Letters. 2022, Vol. 120, no. 15. ISSN 0003-6951. Available from:
https://doi.org/10.1063/5.0080372.
Detail SMAJDOROVÁ, Tereza and NOSKIEVIČOVÁ, Darja. Analysis and Application of Selected Control Charts Suitable for Smart Manufacturing Processes. Online.
Applied Sciences. 2022, Vol. 12, no. 11. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/12/11/5410.
Detail FRYDRÝŠEK, Karel; SKOUPÝ, Ondřej; MRKVICA, Ivan; SLANINKOVÁ, Aneta; KRATOCHVÍL, Jiří; JURGA, Tibor; VLK, Miroslav; KRPEC, Pavel; MADEJA, Roman; HAVLICEK, Miroslav; STANCEKOVA, Dana; POMETLOVA, Jana and HLINKA, Josef. Stochastic Evaluation of Cutting Tool Load and Surface Quality during Milling of HPL. Online.
Applied Sciences. 2022, Vol. 12, no. 24. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/12/24/12523.
Detail SEJDA, František; FRYDRÝŠEK, Karel; PLEVA, Leopold; POMPACH, Martin; HLINKA, Josef; SADÍLEK, Marek; MURCINKOVA, Zuzana; KRPEC, Pavel; HAVLICEK, Miroslav; MADEJA, Roman; POMETLOVA, Jana; UČEŇ, Oldřich and DOSTÁLOVÁ, Kamila. Numerical Analysis of the Calcaneal Nail C-NAIL. Online.
Applied Sciences. 2022, Vol. 12, no. 10. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/12/10/5265.
Detail FRYDRÝŠEK, Karel; HALO, Tomáš; ČEPICA, Daniel; MACHALLA, Vojtěch; VLČKOVÁ, Kateřina; SKOUPÝ, Ondřej; MADEJA, Roman; HAVLÍČEK, Miroslav; DOSTÁLOVÁ, Kamila; TREFIL, Antonín; PLEVA, Leopold; MURČINKOVÁ, Zuzana; KRPEC, Pavel and HLINKA, Josef. Biomechanical Assessment of Cannulated Nails for the Treatment of Proximal Femur Fractures. Online.
Applied Sciences. 2022, Vol. 12, no. 15. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/12/15/7470/htm.
Detail MATĚJOVÁ, Lenka; BEDNÁREK, Jan; TOKARSKÝ, Jonáš; KOUTNÍK, Ivan; SOKOLOVÁ, Barbora and CRUZ, Gerardo Juan Francisco. Adsorption of the most common non-steroidal analgesics from aquatic environment on agricultural wastes-based activated carbons; experimental adsorption study supported by molecular modeling.
Applied Surface Science. 2022, Vol. 605, no. 15 December 2022. ISSN 0169-4332.
Detail NIEDOBOVÁ, Barbora; BADAWY, W.M.; DMITRIEV, A.Yu.; JANČÍK, Petr; CHEPURCHENKO, O.E.; BULAVIN, M.V. and BELOVA, M.O.. Neutron Activation Analysis of PM10 for Air Quality of an Industrial Region in the Czech Republic: A Case Study. Online.
Atmosphere. 2022, Vol. 13, no. 3. ISSN 2073-4433. Available from:
https://www.mdpi.com/2073-4433/13/3/479.
Detail MICHALSKA, Monika Kinga; LAWNICZAK, Pawel; STRACHOWSKI, Tomasz; OSTROWSKI, Adam and BEDNARSKI, Waldemar. Structural studies and selected physical investigations of LiCoO2 obtained by combustion synthesis. Online.
Beilstein journal of nanotechnology. 2022, Vol. 13, no. december, p. 1473-1482. ISSN 2190-4286. Available from:
https://www.beilstein-journals.org/bjnano/articles/13/121.
Detail BEDNÁREK, Jan; MATĚJOVÁ, Lenka; KOUTNÍK, Ivan; VRÁBLOVÁ, Martina; CRUZ, Gerardo Juan Francisco; STRAŠÁK, Tomáš; ŠILER, Pavel and HRBÁČ, Jan. Revelation of high-adsorption-performance activated carbon for removal of fluoroquinolone antibiotics from water. Online.
Biomass Conversion and Biorefinery. 2022, no. Březen 2022. ISSN 2190-6815. Available from:
https://link.springer.com/article/10.1007/s13399-022-02577-z.
Detail KRISHNAMOORTHY, H; RAMYEA, R.; MARUTHU, A.; KANDASAMY, K.; MICHALSKA, Monika Kinga and KANDASAMY, S.K.. Synthesis methods of carbonaceous materials from different bio-wastes as electrodes for supercapacitor and its electrochemistry - A review.
Bioresource Technology Reports. 2022, Vol. 19, no. September. ISSN 2589-014X.
Detail FILIP EDELMANNOVÁ, Miroslava; RELI, Martin; NADRAH, P.; ROZMAN, N.; RICKA, Rudolf; SEVER, Škapin Adrijana; NOSAN, Miha; LAVRENČIČ, Štangar U. and KOČÍ, Kamila. A comparative study of TiO2 preparation method on their photocatalytic activity for CO2 reduction. Online.
Catalysis Today. 2022, no. March 2023. ISSN 0920-5861. Available from:
https://www.sciencedirect.com/science/article/abs/pii/S0920586122004229.
Detail GABOR, Roman; PRYMUS, Tomas; CVRCEK, Ladislav; NEHASIL, Vaclav; HLINKA, Josef; BURIL, Matej; TOKARČÍKOVÁ, Michaela and SEIDLEROVÁ, Jana. Final surface modification for better wear resistance of ceramic coating on cast AlSi10Mg alloy. Online.
Ceramics International. 2022, Vol. 48, no. 24, p. 37433-37447. ISSN 0272-8842. Available from:
https://www.sciencedirect.com/science/article/pii/S0272884222034022.
Detail KLUSÁK, Jan; MUCHA, Jan and VEČEŘ, Marek. 3D-printed microfluidic device for monodisperse emulsions preparation.
Chemical Papers. 2022, Vol. 75, no. 11, p. 6101-6113. ISSN 2585-7290.
Detail MALCHARCZIKOVÁ, Jitka; SKOTNICOVÁ, Kateřina; KAWULOK, Petr; KAWULOK, Rostislav; SZURMAN, Ivo and RŮŽIČKA, Jana. Preparation and Properties of Directionally Solidified Ni-Al Based Alloys Modified by Molybdenum. Online.
Crystals. 2022, Vol. 12, no. 2. ISSN 2073-4352. Available from:
https://www.mdpi.com/2073-4352/12/2/215.
Detail NOVÁK, Vlastimil; ŘEHÁČKOVÁ, Lenka; ROSYPALOVÁ, Silvie and MATÝSEK, Dalibor. Wetting of Refractory Ceramics with High-Manganese and Structural Steel and Description of Interfacial Interaction. Online.
Crystals. 2022, Vol. 12, no. 12. ISSN 2073-4352. Available from:
https://www.mdpi.com/2073-4352/12/12/1782.
Detail PRAUS, Petr; SMÝKALOVÁ, Aneta; CVEJN, Daniel; LOSERTOVÁ, Sandra; MARTIN, Koštejn and NOVÁK, Vlastimil. Post-synthetic modification of graphitic carbon nitride with PCl3 and POCl3 for enhanced photocatalytic degradation of organic compounds.
Diamond and Related Materials. 2022, Vol. 130, no. December, p. 109439. ISSN 0925-9635.
Detail ŘEHOŘEK, Jakub. Charakterizace minoritních fází v homogenním svarovém spoji z oceli X6CrNiNbN25-20 pocreepové expozici při teplotě 700 °C.
Energetika. 2022, Vol. 72, no. 1, p. 54-58. ISSN 0375-8842.
Detail ČABANOVÁ, Kristina; ŠTRBOVÁ, Kristína; MOTYKA, Oldřich; ZELENÍK, Karol; DVOŘÁČKOVÁ, Jana; ZABIEGAJ, Dominika; HAVLÍČEK, Miroslav and KUKUTSCHOVÁ, Jana. Traffic pollution tracers in the lymphatic system tissue of children-possible link to chronic tonsillitis development: pilot study.
Environmental Science and Pollution Research. 2022, Vol. 29, no. 26, p. 39131-39138. ISSN 0944-1344.
Detail ŠIMONOVÁ, Zuzana; PORUBOVÁ, Ludmila; VERNER, Adam; GABOR, Roman; VILAMOVÁ, Zuzana; DOBROČKA, Edmund; CIESLAR, Miroslav; KRBEČKOVÁ, Veronika; PETEREK DĚDKOVÁ, Kateřina; SVOBODA, Ladislav; BEDNÁŘ, Jiří; DVORSKÝ, Richard and SEIDLEROVÁ, Jana. Simple Fabrication of Polycaprolactone-co-lactide Membrane with Silver Nanowires: Synthesis, Characterization and Cytotoxicity Studies.
Fibers and Polymers. 2022, Vol. 23, no. 11, p. 2983-2993. ISSN 1229-9197.
Detail BARTOŇOVÁ, Lucie and RACLAVSKÁ, Helena. Behavior of Cr during coal combustion: An overview.
Fuel. 2022, Vol. 322, no. 124210. ISSN 0016-2361.
Detail BAŠISTOVÁ, Martina; LICHÝ, Petr; KROUPOVÁ, Ivana; OBZINA, Tomáš; BEŇO, Jaroslav; NGUYENOVÁ, Isabel; MERTA, Václav; JEZIERSKI, Jan and RADKOVSKÝ, Filip. Evaluation of additive manufacturing of sand cores in terms of the resulting surface roughness. Online.
Heliyon. 2022, Vol. 8, no. 10. ISSN 2405-8440. Available from:
https://www.scopus.com/record/display.uri?eid=2-s2.0-85139298504&origin=resultslist&sort=plf-f&src=s&st1=Obzina%2cT.&sid=a21334d708195a258eaac38ecbbe864c&sot=b&sdt=b&sl=23&s=AUTHOR-NAME%28Obzina%2c+T.%29&relpos=0&citeCnt=0&searchTerm=.
Detail SCHINDLER, Ivo; KAWULOK, Petr; OPĚLA, Petr; KAWULOK, Rostislav; KONEČNÁ, Kateřina; KONDERLA, Michal; RUSZ, Stanislav; FABÍK, Richard and NĚMEC, Josef. Laboratorní simulace spojitého válcování za tepla střídavou deformací tlakem ve dvou směrech.
Hutnické listy. 2022, Vol. 75, no. 3-4, p. 17-22. ISSN 0018-8069.
Detail KANDER, Ladislav; MIROSLAV, Greger; KANDER, Jan and JONŠTA, Petr. Development of the structure and properties of aluminium alloy EN AW 6082 after severe plastic deformation.
Hutnické listy. 2022, Vol. LXXV, no. 5-6, p. 48-52. ISSN 0018-8069.
Detail KAMYSHNYKOVA, Kateryna; LAPIN, Juraj; PELACHOVA, Tatiana; ČEGAN, Tomáš; JUŘICA, Jan and VOLODARSKAJA, Anastasia. Microstructure and mechanical properties of Ti-45Al-2W-xC alloys.
Intermetallics. 2022, Vol. 148, no. SEP 2022. ISSN 0966-9795.
Detail CABALOVA, Lenka; ČABANOVÁ, Kristina; BIELNIKOVA, Hana; KUKUTSCHOVÁ, Jana; DVORACKOVA, Jana; ZELENIK, Karol and KOMINEK, Pavel. Solid Anorganic Particles and Chronic Rhinosinusitis: A Histopathology Study. Online.
International Journal of Environmental Research and Public Health. 2022, Vol. 19, no. 12. ISSN 1660-4601. Available from:
https://www.mdpi.com/1660-4601/19/12/7269.
Detail VALÁŠKOVÁ, Marta; LEŠTINSKÝ, Pavel; MATĚJOVÁ, Lenka; KLEMENCOVÁ, Kateřina; RITZ, Michal; SCHIMPF, Christian; MOTYLENKO, Mykhailo; RAFAJA, David and BĚLÍK, Jakub. Hematites Precipitated in Alkaline Precursors: Comparison of Structural and Textural Properties for Methane Oxidation. Online.
International Journal of Molecular Sciences. 2022, Vol. 23, no. 15. ISSN 1422-0067. Available from:
https://www.mdpi.com/1422-0067/23/15/8163.
Detail BEDNÁREK, Jan; MATĚJOVÁ, Lenka; JANKOVSKÁ, Zuzana; VAŠTYL, Michal; SOKOLOVÁ, Barbora; PEIKERTOVÁ, Pavlína; ŠILER, Pavel; VERNER, Adam; TOKARSKÝ, Jonáš; KOUTNÍK, Ivan; ŠVÁB, Marek and VRÁBLOVÁ, Martina. The influence of structural properties on the adsorption capacities of microwave-assisted biochars for metazachlor removal from aqueous solutions.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING. 2022, Vol. 10, no. 3. ISSN 2213-2929.
Detail ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; VÁŇOVÁ, Petra; MATÝSEK, Dalibor; TKADLEČKOVÁ, Markéta; KONEČNÁ, Kateřina; SNIEGOŇ, Michal; SMETANA, Bedřich; ROSYPALOVÁ, Silvie; KAWULOKOVÁ, Monika and DROZDOVÁ, Ľubomíra. Interfacial phenomena between alumina substrate and nickel containing low-alloy steel.
Journal of Alloys and Compounds. 2022, Vol. 900, no. April. ISSN 0925-8388.
Detail VALOVICOVA, Vera; PLEVOVA, Eva; VALLOVÁ, Silvie; VACULIKOVA, Lenka; SMÝKALOVÁ, Aneta; NAPRUSZEWSKA, Bogna D; SERWICKA, Ewa M and DOLINSKA, Silvia. Removal of amoxicillin and ampicillin using manganese dioxide/montmorillonite composite. Online.
Journal of Chemical Technology and Biotechnology. 2022, no. 5 October 2022. ISSN 0268-2575. Available from:
https://onlinelibrary.wiley.com/doi/epdf/10.1002/jctb.7235.
Detail JAIN, Amrita; MICHALSKA, Monika Kinga; ZASZCZYŃSKA, Angelika and DENIS, Piotr. Surface modification of activated carbon with silver nanoparticles for electrochemical double layer capacitors.
Journal of Energy Storage. 2022, Vol. 54, no. October. ISSN 2352-152X.
Detail PAUŠOVÁ, Šárka; BAUDYS, Michal; KOSINA, Jiří; PRAUS, Petr; PINTAR, Albin; ŽERJAV, Gregor; ROŠKARIČ, Matevž; FINŽGAR, Matjaž and KRÝSA, Josef. Photochemical stability of g-C3N4 in the gas phase.
Journal of Environmental Chemical Engineering. 2022, Vol. 10, no. 3, p. 107647. ISSN 2213-3437.
Detail DRONG, Mariusz; DEMS, Maciej; PERINA, Jan, Jr; FÖRDÖS, Tibor; JAFFRES, Henri-Yves; POSTAVA, Kamil and DROUHIN, Henri-Jean. Time-Dependent Laser Cavity Perturbation Theory: Exploring Future Nano-Structured Photonic Devices in Semi-Analytic way. Online.
Journal of Lightwave Technology. 2022, Vol. 40, no. 14, p. 4735-4745. ISSN 0733-8724. Available from:
https://ieeexplore.ieee.org/document/9760173.
Detail DROZDOVÁ, Ľubomíra; SMETANA, Bedřich; MACHŮ, Mario; NOVÁK, Vlastimil; VONTOROVÁ, Jiřina; ZLÁ, Simona; KAWULOKOVÁ, Monika; ŘEHÁČKOVÁ, Lenka and SOROKINA, Svetlana. Impact of Ni on the thermophysical and thermodynamic properties of Fe-C-Ni based alloys. Online.
Journal of Materials Research and Technology. 2022, no. 20, p. 4318-4332. ISSN 2238-7854. Available from:
https://www.sciencedirect.com/science/article/pii/S2238785422013928?via%3Dihub.
Detail MATĚJKA, Vlastimil; ŠKUTA, Radim; FONIOK, Kryštof; NOVÁK, Vlastimil; CVEJN, Daniel; MARTAUS, Alexandr; MICHALSKA, Monika Kinga; PAVLOVSKÝ, Jiří and PRAUS, Petr. The role of the g-C3N4 precursor on the P doping using HCCP as a source of phosphorus. Online.
Journal of Materials Research and Technology. 2022, Vol. 18, no. 7.4.2022, p. 3319-3335. ISSN 2238-7854. Available from:
https://www.sciencedirect.com/science/article/pii/S2238785422005191?via%3Dihub.
Detail OVČAČÍKOVÁ, Hana; TOKARSKÝ, Jonáš; MAIEROVÁ, Petra; MATĚJKOVÁ, Petra; VELIČKA, Marek and OLŠANSKÝ, Jiří. Effect of Mass Ratio and Milling on Compressive Strength and Corrosion Resistance of Blast-Furnace Slag/Fly Ash Geopolymer Activated by Solid Alkali Activator. Online.
Journal of Sustainable Metallurgy. 2022, Vol. 2022, no. 8, p. 1961–1974. ISSN 2199-3823. Available from:
https://link.springer.com/article/10.1007/s40831-022-00618-5.
Detail MATĚJKOVÁ, Petra; MATĚJKA, Vlastimil; SABOVCIK, Tomas; GRYZBON, Ludek and VLČEK, Jozef. Alkali Activation of Ground Granulated Blast Furnace Slag and Low Calcium Fly Ash Using "One-Part" Approach. Online.
Journal of Sustainable Metallurgy. 2022, Vol. 8, no. 1. ISSN 2199-3823. Available from:
https://doi.org/10.1007/s40831-022-00513-z.
Detail GREGER, Miroslav; KWARTENG, Oskar and KANDER, Ladislav. Progresivní technologie kování výkovků pro JE. Online.
Kovárenství. 2022, Vol. 77, no. listopad, p. 10-15. ISSN 1213-9289. Available from:
http://kovarenstvi.cz/cs/archiv/c77.html.
Detail KAWULOK, Rostislav; PASEČNÝ, Daniel; KAWULOK, Petr; RUSZ, Stanislav; SCHINDLER, Ivo and OPĚLA, Petr. Postup přípravy kompozitní oceli pomocí válcování za tepla.
Kovárenství. 2022, Vol. 77, p. 16-21. ISSN 1213-9289.
Detail GREGER, Miroslav; KWARTENG, Oskar; KAWULOK, Rostislav and KANDER, Ladislav. Kování a tepelné zpracování Ti a slitin Ti. Online.
Kovárenství. 2022, Vol. 75, no. březen, p. 18-25. ISSN 1213-9289. Available from:
http://kovarenstvi.cz/cs/archiv/c75.html.
Detail KAWULOK, Rostislav; SCHINDLER, Ivo; KAWULOK, Petr; OPĚLA, Petr; OČENÁŠEK, Vladivoj; RUSZ, Stanislav; SAUER, Michal and NĚMEC, Josef. Popis deformačního chování hliníkové slitiny 6005A za tepla.
Kovárenství. 2022, no. 76, p. 19-24. ISSN 1213-9289.
Detail GREGER, Miroslav; KWARTENG, Oskar; RUSZ, Stanislav and ŠVEC, Jiří. Výroba výkovků a tepelné zpracování ocelových válců. Online.
Kovárenství. 2022, Vol. 76, no. červen, p. 32-38. ISSN 1213-9289. Available from:
http://kovarenstvi.cz/cs/archiv/c76.html.
Detail JAYASHREE, Priyadarshini; MATĚJKA, Vlastimil; FONIOK, Kryštof and STRAFFELINI, Giovanni. Comparative Studies on the Dry Sliding Behavior of a Low-Metallic Friction Material with the Addition of Graphite and Exfoliated g-C3N4. Online.
Lubricants. 2022, Vol. 10, no. 2. ISSN 2075-4442. Available from:
https://www.mdpi.com/2075-4442/10/2/27.
Detail MATĚJKA, Vlastimil; JAYASHREE, Priyadarshini; LEONARDI, Mara; VLČEK, Jozef; SABOVCIK, Tomas and STRAFFELINI, Giovanni. Utilization of Metallurgical Slags in Cu-free Friction Material Formulations. Online.
Lubricants. 2022, Vol. 10, no. 9. ISSN 2075-4442. Available from:
https://www.mdpi.com/2075-4442/10/9/219.
Detail RADKOVSKÝ, Filip; BAŠISTOVÁ, Martina; MERTA, Václav; LICHÝ, Petr; KROUPOVÁ, Ivana; NGUYENOVÁ, Isabel; KIELAR, Šimon; FOLTA, Martin; BRADIC, Josef and KOCICH, Radim. Effect of the Composition of Hybrid Sands on the Change in Thermal Expansion. Online.
MATERIALS. 2022, Vol. 15, no. 17. ISSN 1996-1944. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:000851805200001.
Detail ČEGAN, Tomáš; KAMYSHNYKOVA, Kateryna; LAPIN, Juraj; SZURMAN, Ivo; JUŘICA, Jan and KLIMANTOVÁ, Vendula. Processing and Microstructure of As-Cast Ti-45Al-2W-xC Alloys. Online.
Materials. 2022, Vol. 15, no. 14. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/15/14/5049.
Detail JANČAR, Dalibor; MACHŮ, Mario; VELIČKA, Marek; TVARDEK, Petr; KOCIAN, Leos and VLČEK, Jozef. Use of Neural Networks for Lifetime Analysis of Teeming Ladles. Online.
Materials. 2022, Vol. 15, no. 22. ISSN 1996-1944. Available from:
https://www.mdpi.com/1956460.
Detail OVČAČÍKOVÁ, Hana; VELIČKA, Marek; VLČEK, Jozef; TOPINKOVÁ, Michaela; KLÁROVÁ, Miroslava and BURDA, Jiří. Corrosive Effect of Wood Ash Produced by Biomass Combustion on Refractory Materials in a Binary Al-Si System. Online.
Materials. 2022, Vol. 15, no. 16. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/15/16/5796.
Detail LUDWIG, Maciej; SNIEZEK, Edyta; JASTRZEBSKA, Ilona; PROROK, Ryszard; LI, Yawei; LIAO, Ning; NATH, Mithun; VLČEK, Jozef and SZCZERBA, Jacek. Corrosion Resistance of MgO and Cr2O3-Based Refractory Raw Materials to PbO-Rich Cu Slag Determined by Hot-Stage Microscopy and Pellet Corrosion Test. Online.
Materials. 2022, Vol. 15, no. 3. ISSN 1996-1944. Available from:
https://www.mdpi.com/1455684.
Detail NOVÁK, Vlastimil; ŘEHÁČKOVÁ, Lenka; VÁŇOVÁ, Petra; SNIEGOŇ, Michal; MATÝSEK, Dalibor; KONEČNÁ, Kateřina; SMETANA, Bedřich; ROSYPALOVÁ, Silvie; TKADLEČKOVÁ, Markéta; DROZDOVÁ, Ľubomíra and KLUS, Petr. The Effect of Trace Oxygen Addition on the Interface Behavior of Low-Alloy Steel. Online.
Materials. 2022, Vol. 15, no. 4. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/15/4/1592.
Detail KUNČICKÁ, Lenka; KOCICH, Radim; BENČ, Marek and DVOŘÁK, Jiří. Affecting Microstructure and Properties of Additively Manufactured AISI 316L Steel by Rotary Swaging. Online.
Materials. 2022, Vol. 15, no. 18, p. 6291. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/15/18/6291/htm.
Detail ČECH BARABASZOVÁ, Karla; SLÍVA, Aleš; KRATOŠOVÁ, Gabriela; HOLEŠOVÁ, Sylva; VOLODARSKAJA, Anastasia; CETINKAYA, Tugrul; BROŽOVÁ, Silvie; KOZUBEK, Libor and SIMHA MARTYNKOVÁ, Gražyna. Phase Transformation after Heat Treatment of Cr-Ni Stainless Steel Powder for 3D Printing. Online.
Materials. 2022, Vol. 15, no. 15. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/15/15/5343.
Detail MĚSÍČEK, Jakub; ČEGAN, Tomáš; MA QUOC, Phu; HALAMA, Radim; SKOTNICOVÁ, Kateřina; HAJNYŠ, Jiří; JUŘICA, Jan; KRPEC, Pavel and PAGÁČ, Marek. Effect of artificial aging on the strength, hardness, and residual stress of SLM AlSi10Mg parts prepared from the recycled powder. Online.
Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing. 2022, Vol. 855, no. 143900. ISSN 0921-5093. Available from:
https://www.sciencedirect.com/science/article/pii/S0921509322012795?via%3Dihub.
Detail MICHALSKA, Monika Kinga; PAVLOVSKÝ, Jiří; LEMAŃSKI, K.; MAŁECKA, M.; PTAK, M.; NOVÁK, Vlastimil; KORMUNDA, M. and MATĚJKA, Vlastimil. The effect of surface modification with Ag nanoparticles on 21 nm TiO2: anatase/rutile material for application in photocatalysis.
Materials Today Chemistry. 2022, Vol. 26, no. December. ISSN 2468-5194.
Detail GABOR, Roman; CVRČEK, Ladislav; DOUBKOVÁ, Martina; NEHASIL, Václav; HLINKA, Josef; UNUCKA, Petr; BUŘIL, Matěj; PODEPŘELOVÁ, Adéla; SEIDLEROVÁ, Jana and BAČÁKOVÁ, Lucie. Hybrid coatings for orthopaedic implants formed by physical vapour deposition and microarc oxidation. Online.
Materials and Design. 2022, Vol. 219, no. July. ISSN 0264-1275. Available from:
https://www.sciencedirect.com/science/article/pii/S0264127522004336?via%3Dihub.
Detail OPĚLA, Petr; SCHINDLER, Ivo; KAWULOK, Petr; KAWULOK, Rostislav; RUSZ, Stanislav and SAUER, Michal. Shallow and deep learning of an artificial neural network model describing a hot flow stress Evolution: A comparative study. Online.
Materials and Design. 2022, Vol. 220, no. 110880. ISSN 0264-1275. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:000861662000001.
Detail KLIKA, Zdeněk; BARTOŇOVÁ, Lucie; KOSTURA, Bruno; MAIEROVÁ, Petra; VLČEK, Jozef; DOBROVSKÁ, Jana; MATÝSEK, Dalibor and KRČMÁŘ, Jiří. Critical evaluation of quantitative determination of minerals in slags by a new MCQMA and QXRD methods.
Materials and Structures/Materiaux et Constructions. 2022, Vol. 55, no. 10. ISSN 1359-5997.
Detail MATĚJKA, Vlastimil; LEONARDI, Mara; PRAUS, Petr; STRAFFELINI, Giovanni and GIALANELLA, Stefano. The Role of Graphitic Carbon Nitride in the Formulation of Copper-Free Friction Composites Designed for Automotive Brake Pads. Online.
Metals. 2022, Vol. 12, no. 1. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/12/1/123.
Detail JANČAR, Dalibor; MACHŮ, Mario; VELIČKA, Marek; TVARDEK, Petr and VLČEK, Jozef. Use of Numerical Methods for the Design of Thermal Protection of an RFID-Based Contactless Identification System of Ladles. Online.
Metals. 2022, Vol. 12, no. 7. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/12/7/1163/htm.
Detail DRÁPALA, Jaromír; RIGOULET, Hana; BROŽOVÁ, Silvie; MALCHARCZIKOVÁ, Jitka; LANGOVÁ, Šárka; VONTOROVÁ, Jiřina; NÉTEK, Václav; KUBAC, Jaroslav and JANACEK, Dominik. Processing of Metal Waste-Sludge from the Galvanizing Plants. Online.
Metals. 2022, Vol. 12, no. 11. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/12/11/1947.
Detail VODÁREK, Vlastimil; ROŽNOVSKÁ, Gabriela; KUBOŇ, Zdeněk; VOLODARSKAJA, Anastasia and PALUPČÍKOVÁ, Renáta. The Effect of Long-Term Ageing at 475 °C on Microstructure and Properties of a Precipitation Hardening MartensiticStainless Steel. Online.
Metals. 2022, Vol. 12, no. 10. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/12/10/1643.
Detail VALÁŠKOVÁ, Marta; KOČÍ, Kamila; MADEJOVA, Jana; MATĚJOVÁ, Lenka; PAVLOVSKÝ, Jiří; TRINDADE MARTINS VIDIGAL BARROCAS, Beatriz and KLEMENCOVÁ, Kateřina. alpha-Fe2O3 Nanoparticles/Iron-Containing Vermiculite Composites: Structural, Textural, Optical and Photocatalytic Properties. Online.
Minerals. 2022, Vol. 12, no. 5. ISSN 2075-163X. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:000802637600001.
Detail VALÁŠKOVÁ, Marta; KLIKA, Zdeněk; VLČEK, Jozef; MATĚJOVÁ, Lenka; TOPINKOVÁ, Michaela; PÁLKOVÁ, Helena and MADEJOVÁ, Jana. Alkali-Activated Metakaolins: Mineral Chemistry and Quantitative Mineral Composition. Online.
Minerals. 2022, Vol. 12, no. 11, p. 1-18. ISSN 2075-163X. Available from:
https://www.mdpi.com/2075-163X/12/11/1342.
Detail KLEGOVÁ, Anna; PACULTOVÁ, Kateřina; KIŠKA, Tomáš; PEIKERTOVÁ, Pavlína; ROKICINSKA, Anna; KUSTROWSKI, Piotr and OBALOVÁ, Lucie. Washcoated open-cell foam cobalt spinel catalysts for N2O decomposition.
Molecular Catalysis. 2022, Vol. 533, no. December. ISSN 2468-8231.
Detail HORÁKOVÁ, Pavlína and KOČÍ, Kamila. Continuous-Flow Chemistry and Photochemistry for Manufacturing of Active Pharmaceutical Ingredients. Online.
Molecules. 2022, Vol. 27, no. 23. ISSN 1420-3049. Available from:
https://www.mdpi.com/1420-3049/27/23/8536.
Detail KANDASAMY, Senthil Kumar; RAVINDARAN, Ramyea; MICHALSKA, Monika Kinga; MUTHUSAMY, Suresh; ALMUTAIRI, Tahani Mazyad; PANCHAL, Hitesh; GORJI, M. R; ALRUBAI, Ali Jawad; MOHAMED, Mohamed A and JABER, Mustafa Musa. Highly carbonized Prunus dulcis shell-derived activated carbon for high-performance supercapacitor applications.
Polymer Bulletin. 2022, no. November. ISSN 0170-0839.
Detail ŠKRLOVÁ, Kateřina; RYBKOVÁ, Zuzana; STACHUROVÁ, Tereza; ZÁGORA, Jakub; MALACHOVÁ, Kateřina; MĚŘINSKÁ, Dagmar; GABOR, Roman; HAVLÍČEK, Miroslav; MUÑOZ-BONILLA, Alexandra; FERNÁNDEZ-GARCÍA, M. and PLACHÁ, Daniela. Long-term antimicrobial effect of polylactide-based composites suitable for biomedical use. Online.
Polymer testing. 2022, Vol. 116, no. December. ISSN 0142-9418. Available from:
https://www.sciencedirect.com/science/article/pii/S0142941822002811?via%3Dihub.
Detail PROSTĚJOVSKÝ, Tomáš; KULIŠŤÁKOVÁ, Alena; RELI, Martin; ZEBRAK, Radim and KOČÍ, Kamila. Photochemical treatment (UV/O3+UV/H2O2) of waste gas emissions containing organic pollutants in pilot plant unit. Online.
Process safety and environmental protection. 2022, Vol. 163, no. July, p. 274-282. ISSN 0957-5820. Available from:
https://www.sciencedirect.com/science/article/abs/pii/S0957582022004256.
Detail BESTA, Petr; JANOVSKÁ, Kamila; MARTÍNEK, Zdeněk; ŠVECOVÁ, Eva and DRASTICH, Adam. Negative Environmental Impacts of Production Technologies. Online.
Rocznik Ochrony Środowiska. 2022, Vol. 24, p. 307-325. ISSN 1506-218X. Available from:
https://ros.edu.pl/index.php?id=1125&lang=en.
Detail WĘDRYCHOWICZ, M.; PIOTROWICZ, A.; GABRYELEWICZ, I.; STRYJSKI, R.; KRUPA, P.; OKONIEWSKA, O.; BESTA, Petr and SAMOLEJOVÁ, Andrea. Recycling of Gold From Waste Electrical and Electronic Equipment by Electrorefining of Copper. Online.
Rocznik Ochrony Środowiska. 2022, Vol. 24, no. 4, p. 371-382. ISSN 1506-218X. Available from:
https://ros.edu.pl/images/roczniki/2022/026_ROS_V24_R2022.pdf.
Detail GABRYELEWICZ, I.; WĘDRYCHOWICZ, M.; WOŹNIAK, W. and BESTA, Petr. SEVESO III Directive – Information on Establishments with a High or Increased Risk of a Major Industrial Accident. Online.
Rocznik Ochrony Środowiska. 2022, Vol. 24, no. 4, p. 383-392. ISSN 1506-218X. Available from:
https://ros.edu.pl/images/roczniki/2022/027_ROS_V24_R2022.pdf.
Detail PRAUS, Petr; ŘEHÁČKOVÁ, Lenka; ČÍŽEK, Jakub; SMÝKALOVÁ, Aneta; KOŠTEJN, Martin; PAVLOVSKÝ, Jiří; FILIP EDELMANNOVÁ, Miroslava and KOČÍ, Kamila. Synthesis of vacant graphitic carbon nitride in argon atmosphere and its utilization for photocatalytic hydrogen generation. Online.
Scientific Reports. 2022, Vol. 12, no. 1, p. 13622. ISSN 2045-2322. Available from:
https://doi.org/10.1038/s41598-022-17940-3.
Detail JAIN, A.; MANIPPADY, S.R.; TANG, R.; NISHIHARA, H.; SOBCZAK, K.; MATĚJKA, Vlastimil and MICHALSKA, Monika Kinga. Vanadium oxide nanorods as an electrode material for solid state supercapacitor. Online.
Scientific Reports. 2022, Vol. 12, no. 1, p. 21024. ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-022-25707-z.
Detail LANGOVÁ, Šárka; KOSTURA, Bruno; RAŠKA, Pavel; MATÝSEK, Dalibor; NOVÁK, Vlastimil; RITZ, Michal and KRČMÁŘ, Jiří. Electrochemical characterization of leached steel-making sludge. Online.
Scientific Reports. 2022, Vol. 12, no. 1. ISSN 2045-2322. Available from:
https://www.nature.com/articles/s41598-022-20980-4.
Detail VRÁBLOVÁ, Martina; SMUTNÁ, Kateřina; KOUTNÍK, Ivan; PROSTĚJOVSKÝ, Tomáš and ZEBRAK, Radim. Surface Plasmon Resonance Imaging Sensor for Detection of Photolytically and Photocatalytically Degraded Glyphosate. Online.
Sensors. 2022, Vol. 22, no. 23. ISSN 1424-3210. Available from:
https://www.mdpi.com/1424-8220/22/23/9217.
Detail BAŠISTOVÁ, Martina and KIELAR, Šimon. Zhodnocení účinnosti mísičů a stanovení efektivní doby mísení.
Slévárenství. 2022, no. 4/2022, p. 195-200. ISSN 0037-6825.
Detail ZÁVRBSKÁ, Martina. Moderní nákladový controlling ve společnosti HAMAG.
Slévárenství. 2022, Vol. 2022, no. 2, p. 67-71. ISSN 0037-6825.
Detail MICHALSKA, Monika Kinga; PAVLOVSKÝ, Jiří; PEIKERTOVÁ, Pavlína; HOLEŠOVÁ, Sylva; ANURATHA, K.S. and LIN, J.-Y.. Mesoporous/Microporous Li4Ti5O12/rutile-TiO2 as an anode material for lithium-ion batteries synthesized by the sol-gel method.
Solid State Ionics. 2022, Vol. 384, no. october. ISSN 0167-2738.
Detail NENADÁL, Jaroslav; VYKYDAL, David; HALFAROVÁ, Petra and TYLEČKOVÁ, Eva. Quality 4.0 Maturity Assessment in Light of the Current Situation in the Czech Republic. Online.
Sustainability. 2022, Vol. 14, no. 12. ISSN 2071-1050. Available from:
https://www.mdpi.com/2071-1050/14/12/7519.
Detail HORÁK, Jiří; KUBOŇOVÁ, Lenka; DEJ, Milan; RYŠAVÝ, Jiří; BAJER, Stanislav; KYSUČAN, Zdeněk; ULRICH, Pavel; MAREČEK, Pavel; TESAŘ, Filip; GARBA, Martin; HOPAN, František and PRAUS, Petr. Long-Term Neutralization of Acidic Condensate from Gas Condensing Boilers. Online.
Sustainability. 2022, Vol. 14, no. 12, p. 1-13. ISSN 2071-1050. Available from:
https://www.mdpi.com/2071-1050/14/22/15015.
Detail WOJNAROVÁ, Petra; BASINAS, Panagiotis; RUSÍN, Jiří and BURYJAN, Roman. Biogas upgrading using a water-swollen composite polyamide membrane. Online.
Waste Forum. 2022, Vol. 4, no. 4, p. 263-270. ISSN 1804-0195. Available from:
http://www.wasteforum.cz/cisla/WF_4_2022.pdf.
Detail SCHINDLER, Ivo; OPĚLA, Petr; KAWULOK, Petr; SAUER, Michal; RUSZ, Stanislav; KUC, Dariusz and RODAK, Kinga. HOT DEFORMATION ACTIVATION ENERGY OF METALLIC MATERIALS INFLUENCED BY STRAIN VALUE. Online.
Archives of Metallurgy and Materials. 2021, Vol. 66, no. 1, p. 223-228. ISSN 1733-3490. Available from:
https://journals.pan.pl/dlibra/publication/134779/edition/117808/content.
Detail DOHNAL, Pavel and KAZANTSEV, D.. ПРОВЕДЕНИЕ ЗАКУПОК ЗА СЧЕТ БЮДЖЕТА В МЕЖДУНАРОДНОЙ НАУЧНОЙ ОРГАНИЗАЦИИ.
Bûdžetnyj učёt. 2021, no. 2021. ISSN 2499-9482.
Detail TOŠENOVSKÝ, Josef and TOŠENOVSKÝ, Filip. Identifikace odlehlých hodnot v chemických měřeních s uvážením nesymetrie jejich rozdělení pravděpodobnosti.
Chemické listy. 2021, Vol. 115, no. 6, p. 300-304. ISSN 0009-2770.
Detail JANOVSKÁ, Kamila; VOZŇÁKOVÁ, Iveta; BESTA, Petr and ŠAFRÁNEK, Marek. Ecological and economic multicriteria optimization of operating alternative propulsion vehicles within the city of Ostrava in the Czech Republic. Online.
Equilibrium-Quarterly Journal of Economics and Economic Policy. 2021, Vol. 16, no. 4, p. 907-943. ISSN 1689-765X. Available from:
http://economic-research.pl/Journals/index.php/eq/article/view/1932/1824.
Detail DRASTICH, Adam; MALČIC, Tomáš and ZÁVRBSKÁ, Martina. Metody optimalizace nákladů výrobního podniku aplikací principů štíhlé výroby.
Hutnické listy. 2021, Vol. 74, no. 3-4, p. 16-22. ISSN 0018-8069.
Detail ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; VÁŇOVÁ, Petra; MATÝSEK, Dalibor; KONEČNÁ, Kateřina; SMETANA, Bedřich and DOBROVSKÁ, Jana. High - temperature interaction of molten Fe-C-O-Cr alloys with corundum.
Journal of Alloys and Compounds. 2021, Vol. 854, no. February. ISSN 0925-8388.
Detail OPĚLA, Petr; SCHINDLER, Ivo; KAWULOK, Petr; KAWULOK, Rostislav; RUSZ, Stanislav and NAVRÁTIL, Horymír. On various multi-layer perceptron and radial basis function based artificial neural networks in the process of a hot flow curve description. Online.
Journal of Materials Research and Technology. 2021, Vol. 14, p. 1837-1847. ISSN 2238-7854. Available from:
https://www.sciencedirect.com/science/article/pii/S2238785421007638?via%3Dihub.
Detail ŘEHOŘEK, Jakub and NAMBURI, Hygreeva Kiran. Basic Microstructural Characterization of Second Phases in Homogeneous Weld Joint Made of X6CrNiNbN25-20 Steel After Long-Term Exposure Time at 973 K.
Journal of Nuclear Engineering and Radiation Science. 2021, Vol. 7, no. 2. ISSN 2332-8983.
Detail TOKARČÍKOVÁ, Michaela; SEIDLEROVÁ, Jana; MOTYKA, Oldřich; ŽIVOTSKÝ, Ondřej; DROBÍKOVÁ, Klára and GABOR, Roman. Experimental verification of regenerable magnetically modified montmorillonite and its application for heavy metals removal from metallurgical waste leachates.
Journal of Water Process Engineering. 2021, Vol. 39, no. 101691. ISSN 2214-7144.
Detail KAWULOK, Rostislav; KAWULOK, Petr; PUZOŃ, David; JUREK, David; SCHINDLER, Ivo; RUSZ, Stanislav; OPĚLA, Petr and KAWULOKOVÁ, Monika. Porovnání pevnostních a plastických vlastností za tepla u vybraných niklových slitin. Online.
Kovárenství. 2021, no. 74, p. 21-24. ISSN 1213-9289. Available from:
http://www.kovarenstvi.cz/.
Detail KROUPOVÁ, Ivana; GAWRONOVÁ, Martina; LICHÝ, Petr; MERTA, Václav; RADKOVSKÝ, Filip; JANOVSKÁ, Kamila; NGUYENOVA, Isabel; BEŇO, Jaroslav; OBZINA, Tomáš; VASKOVA, Iveta; LANA, Ivo and RYGEL, Jiří. Preparation of Cast Metallic Foams with Irregular and Regular Inner Structure. Online.
Materials. 2021, Vol. 14, no. 22. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/14/22/6989.
Detail TOKARČÍKOVÁ, Michaela; MOTYKA, Oldřich; PEIKERTOVÁ, Pavlína; GABOR, Roman and SEIDLEROVÁ, Jana. Magnetically Modified Biosorbent for Rapid Beryllium Elimination from the Aqueous Environment. Online.
Materials. 2021, Vol. 14, no. 21. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/14/21/6610.
Detail MERTA, Václav; BEŇO, Jaroslav; OBZINA, Tomáš; RADKOVSKÝ, Filip; KROUPOVÁ, Ivana; LICHÝ, Petr; FOLTA, Martin; JANOVSKÁ, Kamila; NGUYENOVA, Isabel and DOSTÁL, Miroslav. Innovative Inorganic Binder Systems for the Production of Cores for Non-Ferrous Metal Alloys Reflecting the Product Quality Requirements. Online.
Metals. 2021, Vol. 11, no. 5. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/11/5/733.
Detail OBZINA, Tomáš; MERTA, Václav; FOLTA, Martin; BRADAC, Josef; BEŇO, Jaroslav; NOVOHRADSKÁ, Nikol; GAWRONOVÁ, Martina; KROUPOVÁ, Ivana; LICHÝ, Petr; RADKOVSKÝ, Filip; JANOVSKÁ, Kamila; VAŠEKOVÁ, Iveta; DROBÍKOVÁ, Klára and NGUYENOVÁ, Isabel. Technological and Quality Aspects of the Use of Innovative Inorganic Binders in the Production of Castings. Online.
Metals. 2021, Vol. 11, no. 11. ISSN 2075-4701. Available from:
https://doi.org/10.3390/met11111779.
Detail VLČEK, Jozef; TOPINKOVÁ, Michaela; KLÁROVÁ, Miroslava; MAIEROVÁ, Petra; OVČAČÍKOVÁ, Hana; MATĚJKA, Vlastimil; MARTAUS, Alexandr and BLAHŮŠKOVÁ, Veronika. Alkali-Activated Metakaolin and Fly Ash as Unfired Ceramic Bonding Systems. Online.
Minerals. 2021, Vol. 11, no. 2. ISSN 2075-163X. Available from:
https://www.mdpi.com/2075-163X/11/2/197/htm.
Detail OVČAČÍKOVÁ, Hana; VELIČKA, Marek; MAIEROVÁ, Petra; VLČEK, Jozef; TOKARSKÝ, Jonáš and ČEGAN, Tomáš. Characterization of Waste Sludge Pigment from Production of ZnCl2. Online.
Minerals. 2021, Vol. 11, no. 3. ISSN 2075-163X. Available from:
https://www.mdpi.com/2075-163X/11/3/313.
Detail KLÁROVÁ, Miroslava; VLČEK, Jozef; TOPINKOVÁ, Michaela; BURDA, Jiří; MARTAUS, Alexandr; PRIESOL, Ivan and SZCZERBA, Jacek. Cement substitution in high-temperature concrete. Online.
Minerals. 2021, Vol. 11, no. 11. ISSN 2075-163X. Available from:
http://www.mdpi.com.
Detail HALAGAČKA, Lukáš; GELNÁROVÁ, Zuzana; AL-GHZAIWAT, Mutaz; FLOREA, Ileana; HORNÍČEK, Jiří; POSTAVA, Kamil and FOLDYNA, Martin. Tin reduction from fluorine doped tin oxide for silicon nanowire-based solar energy harvesting and storage. Online.
Optics Express. 2021, Vol. 29, no. 20, p. 31465-31477. ISSN 1094-4087. Available from:
https://www.osapublishing.org/oe/fulltext.cfm?uri=oe-29-20-31465&id=458824.
Detail DRONG, Mariusz; FÖRDÖS, Tibor; JAFFRÈS, Henri Y.; PEŘINA, Jan; POSTAVA, Kamil; CIOMPA, Přemysl; PIŠTORA, Jaromír and DROUHIN, Henri Jean. Spin-VCSELs with Local Optical Anisotropies: Toward Terahertz Polarization Modulation. Online.
Physical Review Applied. 2021, Vol. 15, no. 1. ISSN 2331-7019. Available from:
https://journals.aps.org/prapplied/abstract/10.1103/PhysRevApplied.15.014041.
Detail ČECH BARABASZOVÁ, Karla; HOLEŠOVÁ, Sylva; HUNDÁKOVÁ, Marianna; HRABOVSKÁ, Kamila; PLESNÍK, Lukáš; KIMMER, Dušan; JOSZKO, Kamil; GZIK-ZROSKA, Bozena and BASIAGA, Marcin. Antimicrobial PVDF nanofiber composites with the ZnO - vermiculite - chlorhexidine based nanoparticles and their tensile properties. Online.
Polymer testing. 2021, Vol. 103, no. November 2021, p. 107367. ISSN 0142-9418. Available from:
https://www.sciencedirect.com/science/article/pii/S0142941821003123.
Detail HOLEŠOVÁ, Sylva; ČECH BARABASZOVÁ, Karla; HUNDÁKOVÁ, Marianna; ŠČUKOVÁ, Michaela; HRABOVSKÁ, Kamila; JOSZKO, Kamil; ANTONOWICZ, Magdalena and GZIK-ZROSKA, Bozena. Development of Novel Thin Polycaprolactone (PCL)/Clay Nanocomposite Films with Antimicrobial Activity Promoted by the Study of Mechanical, Thermal, and Surface Properties. Online.
Polymers. 2021, Vol. 13, no. 18. ISSN 2073-4360. Available from:
https://www.mdpi.com/2073-4360/13/18/3193.
Detail BRESTOVIC, Tomas; CARNOGURSKA, Maria; PŘÍHODA, Miroslav; LAZAR, Marian; PYSZKO, René and JASMINSKA, Natalia. A Similarity Model of the Cooling Process of Fluids during Transportation. Online.
Processes. 2021, Vol. 9, no. 5. ISSN 2227-9717. Available from:
https://www.mdpi.com/2227-9717/9/5/802.
Detail NOSKIEVIČOVÁ, Darja and MORAVEC, Lukáš. Using principles and selected tools of lean six sigma to improve sustainability: A case study.
Quality Engineering. 2021, Vol. 2022, no. January. ISSN 0898-2112.
Detail TOŠENOVSKÝ, Josef; TOŠENOVSKÝ, Filip and DOČKALOVÁ, Ivana. Effects of systematic changes in commodity arrangement on the satisfaction of supermarket customers. Online.
Quality Innovation Prosperity - Kvalita Inovácia Prosperita. 2021, Vol. 25, no. 1, p. 16-32. ISSN 1335-1745. Available from:
https://qip-journal.eu/index.php/QIP/article/view/1497.
Detail VRÁBLOVÁ, Martina; KOUTNÍK, Ivan; SMUTNÁ, Kateřina; MARKOVÁ, Dominika and VEVERKOVÁ, Nikola. Combined spri sensor for simultaneous detection of nitrate and ammonium in wastewater. Online.
Sensors. 2021, Vol. 21, no. 3, p. 1-12. ISBN 0-000-00000-0. Available from:
https://www.mdpi.com/1424-8220/21/3/725.
Detail VRÁBLOVÁ, Martina; KOUTNÍK, Ivan; SMUTNÁ, Kateřina; MARKOVÁ, Dominika and VEVERKOVÁ, Nikola. Combined spri sensor for simultaneous detection of nitrate and ammonium in wastewater.
Sensors. 2021, Vol. 21, no. 3, p. 1-12. ISBN 0-000-00000-0.
Detail ZÁVRBSKÁ, Martina. Využití moderní metody řízení nákladů Activity-Based Costing ve společnosti HAMAG.
Slévárenství. 2021, Vol. 2021, no. 4, p. 227-230. ISSN 0037-6825.
Detail GAWRONOVÁ, Martina and KIELAR, Šimon. Efekt kumulativního mísení na vlastnosti formovací směsi písek-voda-bentonit. Online.
Slévárenství. 2021, no. 4, p. 241-245. ISSN 0037-6825. Available from:
https://www.casopis-slevarenstvi.cz/cs/.
Detail ZÁVRBSKÁ, Martina.
Zavedení nového způsobu popisu výrobní technologie, normování výrobních operací, kalkulace výrobních nákladů a prodejní ceny ve společnosti HAMAG, spol. s r.o..
Slévárenství. 2021, Vol. 2021, no. 2, p. 82-86. ISSN 0037-6825.
Detail GABOR, Roman; CVRČEK, L.; CAUSIDU, S.; DROBÍKOVÁ, Klára; VEČEŘ, Marek; MAMULOVÁ KUTLÁKOVÁ, Kateřina; BUŘIL, M.; HLINKA, Josef and SEIDLEROVÁ, Jana. Effect of additive for preparation of reduced-porosity ceramic layer on Ti-6Al-4 V alloy for orthopaedic and trauma implants. Online.
Surfaces and Interfaces. 2021, Vol. 25, no. srpen 2021. ISSN 2468-0230. Available from:
https://www.sciencedirect.com/science/article/pii/S2468023021002868.
Detail ČECH, M.; WICHER, P.; LENORT, R.; MALČIC, T.; DAVID, J.; HOLMAN, D.; STAŠ, D. and ZÁRUBA, Jiří. Autonomous mobile robot technology for supplying assembly lines in the automotive industry. Online.
Acta logistica. 2020, Vol. 7, no. 2, p. 103-109. ISSN 1339-5629. Available from:
https://actalogistica.eu/issues/2020/II_2020_05_Cech_Wicher_Lenort_Malcic_David_Holman_Stas_Zaruba.pdf.
Detail STRAKA, Martin; KHOURI, S; LENORT, Radim and BESTA, Petr. Improvement of logistics in manufacturing system by the use of simulation modelling: A real industrial case study. Online.
Advances in Production Engineering And Management. 2020, Vol. 15, no. 1, p. 18-30. ISSN 1854-6250. Available from:
http://apem-journal.org/Archives/2020/APEM15-1_018-030.pdf.
Detail KUNČICKÁ, Lenka; MACHÁČKOVÁ, Adéla; PETRMICHL, Rudolf; KLEČKOVÁ, Zuzana and MAREK, Martin. Optimizing induction heating of WNiCo billets processed via intensive plastic deformation. Online.
Applied Sciences. 2020, Vol. 10, no. 22, p. 8125. ISSN 2076-3417. Available from:
https://www.mdpi.com/2076-3417/10/22/8125/htm.
Detail KAWULOK, Rostislav; SCHINDLER, Ivo; NAVRÁTIL, Horymír; ŠEVČÁK, Vojtěch; SOJKA, Jaroslav; KONEČNÁ, Kateřina and CHMIEL, Bohuslav. HOT FORMABILITY OF HEAT-RESISTANT STAINLESS STEEL X15CrNiSi 20-12. Online.
Archives of Metallurgy and Materials. 2020, Vol. 65, no. 2, p. 727-734. ISSN 1733-3490. Available from:
http://journals.pan.pl/dlibra/publication/132812/edition/116049/content.
Detail MATĚJKA, Vlastimil; PERRICONE, Guido; VLČEK, Jozef; OLOFSSON, Ulf and WAHLSTROM, Jens. Airborne Wear Particle Emissions Produced during the Dyno Bench Tests with a Slag Containing Semi-Metallic Brake Pads. Online.
Atmosphere. 2020, Vol. 11, no. 11. ISSN 2073-4433. Available from:
https://www.mdpi.com/2073-4433/11/11/1220/htm.
Detail KOLCHUGINA, Natalia B; ZHELEZNYI, Mark, V; SAVCHENKO, Aleksandr G; MENUSHENKOV, Vladimir P; BURKHANOV, Gennadii S; KOSHKID'KO, Yurii S; CWIK, Jacek; DORMIDONTOV, Nikolai A; SKOTNICOVÁ, Kateřina; KURSA, Miroslav and PROKOFEV, Pavel A. Simulating the Hysteretic Characteristics of Hard Magnetic Materials Based on Nd2Fe14B and Ce2Fe14B Intermetallics. Online.
Crystals. 2020, Vol. 10, no. 6. ISSN 2073-4352. Available from:
https://www.mdpi.com/2073-4352/10/6/518.
Detail KAWULOK, Rostislav; SCHINDLER, Ivo; SOJKA, Jaroslav; KAWULOK, Petr; OPĚLA, Petr; PINDOR, Lukas; GRYCZ, Eduard; RUSZ, Stanislav and ŠEVČÁK, Vojtěch. Effect of Strain on Transformation Diagrams of 100Cr6 Steel. Online.
Crystals. 2020, Vol. 10, no. 4. ISSN 2073-4352. Available from:
https://apps.webofknowledge.com/full_record.do?product=WOS&search_mode=GeneralSearch&qid=1&SID=E3e7SNUiTTcuFm7hl3L&page=1&doc=1.
Detail KOŠTIAL, Pavol; VLČEK, Jozef; KOŠTIALOVÁ JANČÍKOVÁ, Zora; RUŽIAK, Ivan; GAJTANSKÁ, Milada; VELIČKA, Marek; BOŠÁK, Ondrej and ŠPAČKOVÁ, Hana. On Experimental Thermal Analysis of BMC Mensolite 3100 Aging. Online.
Defect and Diffusion Forum. Volume 405. 2020, Vol. 399, no. 1, p. 129-136. ISSN 1012-0386. Available from:
https://www.scientific.net/DDF.399.129.
Detail SCHINDLER, Ivo; KAWULOK, Petr; RUSZ, Stanislav; KAWULOK, Rostislav; OPĚLA, Petr; SOJKA, Jaroslav; SAUER, Michal; PINDOR, Lukáš; CHMIEL, David; BÁRTEK, Vratislav and MELKUS, Miroslav. Diagramy anizotermického rozpadu austenitu oceli 21MnNiMo. Online.
Hutnické listy. 2020, Vol. 73, no. 1-3, p. 6-11. ISSN 0018-8069. Available from:
https://www.hutnickelisty.cz/archiv/obsah-1-3-2020/diagramy-anizotermickeho-rozpadu-austenitu-oceli-21mnnimo/.
Detail KUNČICKÁ, L.; MACHÁČKOVÁ, Adéla; LAVERY, N.P.; KOCICH, Radim; CULLEN, J.C.T. and HLAVÁČ, Libor. Effect of thermomechanical processing via rotary swaging on properties and residual stress within tungsten heavy alloy.
International Journal of Refractory Metals and Hard Materials. 2020, Vol. 87, no. February, p. 105120. ISSN 0263-4368.
Detail DRONG, Mariusz; FÖRDÖS, Tibor; JAFFRÈS, Henri-Yves; PEŘINA ML., Jan; POSTAVA, Kamil; PIŠTORA, Jaromír and DROUHIN, Henri-Jean. Local and mean-field approaches for modeling semiconductor spin-lasers.
Journal of Optics. 2020, Vol. 22, no. 5. ISSN 2040-8978.
Detail STRUNZ, Pavel; KUNČICKÁ, Lenka; KOCICH, Radim; FARKAS, Gergely; MACHÁČKOVÁ, Adéla and RYUKHTIN, Vasyl. Neutron Diffraction Study of Ti-Zr Alloy Microstructure Evolution during Annealing after Severe Plastic Deformation. Online.
Journal of Surface Investigation. 2020, Vol. 14, no. SUPPL 1 / Supplement 1, p. S225-S230. ISSN 1027-4510. Available from:
https://www.webofscience.com/wos/woscc/full-record/WOS:000578828100047.
Detail KOLEJÁK, Pierre; VALA, Daniel; POSTAVA, Kamil; PROVAZNÍKOVÁ, Pavlína and PIŠTORA, Jaromír. Mueller matrix ellipsometry of waveplates for control of their properties and alignment.
Journal of Vacuum Science and Technology B:Nanotechnology and Microelectronics. 2020, Vol. 38, no. 1. ISSN 2166-2746.
Detail SKOTNICOVÁ, Kateřina; BURKHANOV, Gennady S; KOLCHUGINA, Natalia B; KURSA, Miroslav; ČEGAN, Tomáš; LUKIN, Alexander A; ŽIVOTSKÝ, Ondřej; PROKOFEV, Pavel A; JUŘICA, Jan and LI, Ying. Structural and magnetic engineering of (Nd, Pr, Dy, Tb)-Fe-B sintered magnets with Tb3Co0.6Cu0.4Hx composition in the powder mixture.
Journal of magnetism and magnetic materials. 2020, Vol. 498, no. 166220. ISSN 0304-8853.
Detail DROZDOVÁ, Ľubomíra; SMETANA, Bedřich; PRESOLY, Peter; NOVÁK, Vlastimil; MACHŮ, Mario; BERNHARD, Michael; FRANCOVÁ, Hana; ŘEHÁČKOVÁ, Lenka; ZLÁ, Simona and BERNHARD, Christian. Investigation of Fe-C-Cr and Fe-C-Cr-Ni-based systems with the use of DTA and HT-LSCM methods.
Journal of thermal analysis and calorimetry. 2020, Vol. 142, no. 2, p. 535-546. ISSN 1388-6150.
Detail GREGER, Miroslav; KWARTENG, Oskar; ŽŮREK, Ondřej; MAZIARZ, Wojciech and ROGAL, Lukasz. Volné kování podélných výkovků na radiálních kovacích strojích a hydraulických lisech.
Kovárenství. 2020, Vol. 72, no. říjen, p. 14-19. ISSN 1213-9289.
Detail KAWULOK, Rostislav; KAWULOK, Petr; SCHINDLER, Ivo; OPĚLA, Petr and RUSZ, Stanislav. Komplexní studium deformačního chování za tepla oceli 42CrMo4. Online.
Kovárenství. 2020, Vol. 71, no. 71, p. 19-24. ISSN 1213-9289. Available from:
http://www.kovarenstvi.cz/cs/archiv/c71.html.
Detail RŮŽIČKA, Jan; ČEJKOVÁ, Petra; KŘÍŽ, Antonín; BALCAR, Martin; TKADLEČKOVÁ, Markéta and STUDECKÝ, Tomáš. Austenitic steels with added boron for the production of components for the storage of spent nuclear fuel.
Kovárenství. 2020, Vol. 72, no. říjen 2020, p. 26-27. ISSN 1213-9289.
Detail GREGER, Miroslav; KWARTENG, Oskar; MAZIARZ, Wojciech and ROGAL, Lukasz. Technologický postup kování podélných výkovků ze slitin Inconel. Online.
Kovárenství. 2020, Vol. 71, no. březen, p. 8-14. ISSN 1213-9289. Available from:
http://kovarenstvi.cz/cs/archiv/c71.html.
Detail ČARNOGURSKÁ, Mária; PŘÍHODA, Miroslav and GÁLLIK, Robert. Influence of Design Parameters of a Polypropylene Hollow-Fibre Heat Exchanger on Its Thermal Performance. Online.
Materiali in tehnologije. 2020, Vol. 54, no. 6, p. 895-900. ISSN 1580-2949. Available from:
http://mit.imt.si/izvodi/mit206/carnogurska.pdf.
Detail DVORAK, Karel; MACHÁČKOVÁ, Adéla; RAVASZOVA, Simona and GAZDIC, Dominik. Effect of Imposed Shear Strain on Steel Ring Surfaces during Milling in High-Speed Disintegrator. Online.
Materials. 2020, Vol. 13, no. 10, p. 2234. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/13/10/2234/htm.
Detail KUNČICKÁ, Lenka; KOCICH, Radim and KLEČKOVÁ, Zuzana. Effects of Sintering Conditions on Structures and Properties of Sintered Tungsten Heavy Alloy. Online.
Materials. 2020, Vol. 13, no. 10, p. 2338. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/13/10/2338.
Detail KUNCICKA, Lenka and KLEČKOVÁ, Zuzana. Structure Characteristics Affected by Material Plastic Flow in Twist Channel Angular Pressed Al/Cu Clad Composites. Online.
Materials. 2020, Vol. 13, no. 18, p. 4161. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/13/18/4161/htm.
Detail STRUNZ, Pavel; KOCICH, Radim; CANELO-YUBERO, David; MACHÁČKOVÁ, Adéla; BERAN, Premysl and KRÁTKÁ, Ludmila. Texture and Differential Stress Development in W/Ni-Co Composite after Rotary Swaging. Online.
Materials. 2020, Vol. 13, no. 12. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/13/12/2869.
Detail SCHINDLER, Ivo; KAWULOK, Rostislav; OPĚLA, Petr; KAWULOK, Petr; RUSZ, Stanislav; SOJKA, Jaroslav; SAUER, Michal; NAVRÁTIL, Horymír and PINDOR, Lukas. Effects of Austenitization Temperature and Pre-Deformation on CCT Diagrams of 23MnNiCrMo5-3 Steel. Online.
Materials. 2020, Vol. 13, no. 22. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/13/22/5116.
Detail PROKOFEV, P.A.; KOLCHUGINA, N.B.; SKOTNICOVÁ, Kateřina; BURKHANOV, G.S.; KURSA, Miroslav; ZHELEZNYI, M.V.; DORMIDONTOV, N.A.; ČEGAN, Tomáš; BAKULINA, A.S.; KOSHKIDKO, Y.S. and SMETANA, Bedřich. Blending powder process for recycling sintered Nd-Fe-B magnets. Online.
Materials. 2020, Vol. 13, no. 14. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/13/14/3049/htm.
Detail OPĚLA, Petr; SCHINDLER, Ivo; KAWULOK, Petr; KAWULOK, Rostislav; RUSZ, Stanislav; NAVRÁTIL, Horymír and JURČA, Radek. Correlation among the Power Dissipation Efficiency, Flow Stress Course, and Activation Energy Evolution in Cr-Mo Low-Alloyed Steel. Online.
Materials. 2020, Vol. 13, no. 16. ISSN 1996-1944. Available from:
https://www.mdpi.com/1996-1944/13/16/3480/htm.
Detail PACULTOVÁ, Kateřina; KLEGOVÁ, Anna; KIŠKA, Tomáš; FRIDRICHOVÁ, Dagmar; MARTAUS, Alexandr; ROKICINSKA, Anna; KUSTROWSKI, Piotr and OBALOVÁ, Lucie. Effect of support on the catalytic activity of Co3O4-Cs deposited on open-cell ceramic foams for N2O decomposition.
Materials Research Bulletin. 2020, Vol. 129, no. September. ISSN 0025-5408.
Detail KAWULOK, Petr; SCHINDLER, Ivo; SMETANA, Bedřich; MORAVEC, Ján; MERTOVÁ, Andrea; DROZDOVÁ, Ľubomíra; KAWULOK, Rostislav; OPĚLA, Petr and RUSZ, Stanislav. The Relationship between Nil-Strength Temperature, Zero Strength Temperature and Solidus Temperature of Carbon Steels. Online.
Metals. 2020, Vol. 10, no. 3. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/10/3/399.
Detail SCHINDLER, Ivo; OPĚLA, Petr; KAWULOK, Petr; SOJKA, Jaroslav; KONEČNÁ, Kateřina; RUSZ, Stanislav; KAWULOK, Rostislav; SAUER, Michal and TURONOVA, Petra. Hot Deformation Behaviour of Mn-Cr-Mo Low-Alloy Steel in Various Phase Regions. Online.
Metals. 2020, Vol. 10, no. 9. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/10/9/1255.
Detail OPĚLA, Petr; KAWULOK, Petr; SCHINDLER, Ivo; KAWULOK, Rostislav; RUSZ, Stanislav and NAVRÁTIL, Horymír. On the Zener-Hollomon Parameter, Multi-Layer Perceptron and Multivariate Polynomials in the Struggle for the Peak and Steady-State Description. Online.
Metals. 2020, Vol. 10, no. 11. ISSN 2075-4701. Available from:
https://www.mdpi.com/2075-4701/10/11/1413/htm.
Detail KOLCHUGINA, N. B; LUKIN, A. A; KAMINSKAYA, T. P; BURKHANOV, G. S; SKOTNICOVÁ, Kateřina; KURSA, Miroslav; DORMIDONTOV, N. A; PROKOF'EV, P. A; ZELEZHNYI, M., V; ČEGAN, Tomáš; GINZBURG, B. A and BAKULINA, A. S. Morphological Peculiarities of R-Fe-B (R = Nd, Pr) Alloys Formed upon Solidification by Strip-Casting.
Physics of Metals and Metallography. 2020, Vol. 121, no. 8, p. 772-782. ISSN 0031-918X.
Detail BESTA, Petr; KOZEL, Roman; JANOVSKÁ, Kamila; VILAMOVÁ, Šárka; FOLTAN, Drahomír and PIECHA, Marian. Environment and Risks of Iron Production.
Rocznik Ochrony Środowiska. 2020, Vol. 22, no. 1, p. 181-195. ISSN 1506-218X.
Detail KOLOŠ, Pavel and ZÁVORKA, Jakub. Podpora manažerského rozhodovacího problému ve slévárenském podniku s využitím teorie hromadné obsluhy.
Slévárenství. 2020, no. 2020, p. 7-9. ISSN 0037-6825.
Detail KOŠTIAL, Pavol; VLČEK, Jozef; KOŠTIALOVÁ JANČÍKOVÁ, Zora; ŠPAČKOVÁ, Hana; DAVID, Jiří; FRISCHER, Robert and RUŽIAK, Ivan. Effective ecological and cheap heating of dwelling spaces.
Sustainability. 2020, Vol. 12, no. 1, p. 1-15. ISSN 2071-1050.
Detail VYKYDAL, David; FOLTA, Martin and NENADÁL, Jaroslav. A Study of Quality Assessment in Higher Education within the Context of Sustainable Development: A Case Study from Czech Republic. Online.
Sustainability. 2020, Vol. 12, no. 11, p. 1-22. ISSN 2071-1050. Available from:
https://www.mdpi.com/2071-1050/12/11/4769.
Detail KRZIKALLOVÁ, Kateřina and TOŠENOVSKÝ, Filip. Is the Value Added Tax System Sustainable? The Case of the Czech and Slovak Republics. Online.
Sustainability. 2020, Vol. 12, no. 12, p. 4925. ISSN 2071-1050. Available from:
https://www.mdpi.com/2071-1050/12/12/4925.
Detail PUSTĚJOVSKÁ, Pavlína; KARDAS, Edyta; TOMAN, Radek; BAŘINA, Dominik and JURSOVÁ, Simona. MODELS USING IN METALLURGICAL PROCESS MANAGEMENT. Online.
Zarządzanie Przedsiębiorstwem. Enterprise Management. 2020, Vol. 23, no. 3, p. 16-19. ISSN 1643-4773. Available from:
http://zp.ptzp.org.pl/category/2020/.
Detail