Skip to main content
Skip header
Close

Searching

Publications

Article

KOCICH, Radim; KUNČICKÁ, Lenka and CZERNEK, Pavel. Direct Consolidation of Copper-Graphene Composite by Rotary Swaging. Online. Advanced Engineering Materials. 2025, no. 1-8. ISSN 1438-1656. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001445823800001.
Detail
KOCICH, Radim; KUNČICKÁ, Lenka; WANG, Zifan and NEMETH, Gergely. Effect of Thermomechanical Processing on the Impact Deformation of Additively Manufactured 316L Stainless Steel. Online. Advanced Engineering Materials. 2025, Vol. 27, no. 13. ISSN 1438-1656. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001508009000001.
Detail
IZAK, Josef; BENČ, Marek and OPĚLA, Petr. Finite Element Modeling of Thermo-Viscoelastoplastic Behavior of Dievar Alloy under Hot Rotary Swaging. Online. CMES - Computer Modeling in Engineering and Sciences. 2025, Vol. 142, no. 3, p. 3115-3133. ISSN 1526-1492. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001434675400001.
Detail
WALEK, Josef and LICHÝ, Petr. Numerically and Experimentally Establishing Rheology Law for AISI 1045 Steel Based on Uniaxial Hot Compression Tests. Online. CMES - Computer Modeling in Engineering and Sciences. 2025, Vol. 142, no. 3, p. 3135-3153. ISSN 1526-1492. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001447365500001.
Detail
ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; TOKARSKÝ, Jonáš; HEGER, Milan; ZIMNÝ, Ondřej; PEIKERTOVÁ, Pavlína; MATÝSEK, Dalibor; WALEK, Josef; LEINWEBEROVÁ, Sára; NOVÁK, Dalibor; KOŠTEJN, Martin and PRAUS, Petr. Rheological properties of SiO2-CaO-MgO-Al2O3-(0-30 wt%)B2O3 system at basicity 1.4: Experiment and modelling. Ceramics International. 2025, Vol. 51, no. 18, p. 26242-26254. ISSN 0272-8842.
Detail
WALEK, Josef; KOCICH, Radim and KUNČICKÁ, Lenka. Adjusting recrystallization kinetics of WNiCo alloy by intensive shear strain. Online. International Journal of Refractory Metals and Hard Materials. 2025, Vol. 131, no. 107219. ISSN 0263-4368. Available from: https://www.sciencedirect.com/science/article/pii/S0263436825001842?pes=vor&utm_source=scopus&getft_integrator=scopus.
Detail
ANDREYACHSHENKO, Violetta and KUNČICKÁ, Lenka. Technological Alloying Impact on Formation of Phase Composition of Al-Fe-Si-X Alloys. Online. Materials. 2025, Vol. 18, no. 9. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001486498600001.
Detail
KOCICH, Radim; KUNČICKÁ, Lenka and MINÁRIK, Peter. Crossing the limits of 316L steel fabricated by powder bed fusion by thermomechanical post-processing. Online. Materials and Design. 2025, Vol. 253, no. 253, p. 1-10. ISSN 0264-1275. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001477518700001.
Detail
WALEK, Josef; KOCICH, Radim; KUNČICKÁ, Lenka and KOPECEK, Jarek. Effect of thermomechanical processing on structure and mechanical properties of WNiCo. Online. Materialwissenschaft und Werkstofftechnik. 2025, Vol. 56, no. 5, p. 697-704. ISSN 0933-5137. Available from: https://onlinelibrary.wiley.com/doi/epdf/10.1002/mawe.202400354.
Detail
KUNČICKÁ, Lenka; KOCICH, Radim and PAGÁČ, Marek. Experimental and Numerical Study of Behavior of Additively Manufactured 316L Steel Under Challenging Conditions. Online. Metals. 2025, Vol. 15, no. 2. ISSN 2075-4701. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001430490700001.
Detail
KUNČICKÁ, Lenka and KOCICH, Radim. Characterizing the Behavior and Microstructure of Cu-La2O3 Composite Processed via Equal Channel Angular Pressing. Online. Metals. 2025, Vol. 15, no. 4, p. 1-22. ISSN 2075-4701. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001475171900001.
Detail
WALEK, Josef and KUNČICKÁ, Lenka. Effect of Oxide Systems on Purity of Tool Steels Fabricated by Electro Slag Remelting. Online. Molecules. 2025, Vol. 30, no. 6, p. 1-19. ISSN 1420-3049. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001452517200001.
Detail
BENČ, Marek; IZÁK, Josef; WALEK, Josef; OPĚLA, Petr and KOPEČEK, Jarek. Impacts of rotary swaging on the deformation behavior of conventional and 3D-printing Inconel 718 superalloy. Online. Progress in Additive Manufacturing. 2025, Vol. 2025, no. JUN 2025. ISSN 2363-9512. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001504450300001.
Detail
MICZKOVÁ, Kateřina. Litý stav slitiny AlSi10Mg v závislosti na ochlazovacím účinku sádrové formy. Online. Slévárenské listy. 2025, Vol. 2, no. červenec, p. 22-31. ISSN 2788-2586. Available from: https://ceskaslevarenska.cz/wp-content/uploads/2025/07/slevarenske_listy_25_2.pdf.
Detail
RŮŽIČKA, Jana and MACHÁČKOVÁ, Adéla. Využití kompozitních materiálů na bázi wolframu pro technologické aplikace. Online. Slévárenské listy. 2025, Vol. 2025, no. 1, p. 29-33. ISSN 2788-2586. Available from: https://ceskaslevarenska.cz/wp-content/uploads/2025/05/slevarenske_listy_25_1.pdf.
Detail
GERYK, Matěj and KIELAR, Šimon. Možnosti využití 3D tisku modelů v technologii odstředivého lití nízkotavitelných slitin. Online. Slévárenské listy. 2025, Vol. 61, no. 2, p. 31-35. ISSN 2788-2586. Available from: https://ceskaslevarenska.cz/wp-content/uploads/2025/07/slevarenske_listy_25_2.pdf.
Detail
ŠEBEK, František; KUBÍK, Petr; ZAPLETAL, Josef; KUNČICKÁ, Lenka; KOCICH, Radim; PAGÁČ, Marek; PAŠKA, Zbyněk; FOJTÍK, František and HALAMA, Radim. Plasticity and ductile fracture of conventionally manufactured AISI 316L compared to one produced by selective laser melting with and without machining. Online. The international journal of advanced manufacturing technology. 2025, Vol. 137, no. 7-8, p. 3933-3948. ISSN 0268-3768. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001454509600001.
Detail
HLAVÁČ, Libor; KOCICH, Radim; KUNČICKÁ, Lenka; HLAVÁČOVÁ, Irena and GŘUNDĚL, Jakub. Effect of thermomechanical post-processing of additively manufactured AISI 316L steel on abrasive water jet wear. Online. Wear. 2025, Vol. 570, no. Jun 1 2025. ISSN 0043-1648. Available from: https://www.sciencedirect.com/science/article/pii/S0043164825002212?pes=vor&utm_source=scopus&getft_integrator=scopus.
Detail
MACHÁČKOVÁ, Adéla; BÁRTA, Otakar and BROŽOVÁ, Silvie. Applications of Tungsten Pseudo-Alloys in the Energy Sector. Online. APPLIED SCIENCES-BASEL. 2024, Vol. 14, no. 2. ISSN 2076-3417. Available from: https:// doi.org/10.3390/app14020647.
Detail
KUNČICKÁ, Lenka; WALEK, Josef and KOCICH, Radim. Deformation Behavior of La2O3-Doped Copper during Equal Channel Angular Pressing. Online. Advanced Engineering Materials. 2024, no. 2024. ISSN 1438-1656. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001381735300001.
Detail
BAŠISTOVÁ, Martina; VONTOROVÁ, Jiřina; ZLÁ, Simona; KAWULOKOVÁ, Monika; LICHÝ, Petr and DVORSKÝ, Tomáš. Variability in the distinctive features of silica sands in Central Europe. Online. Buildings. 2024, Vol. 14, no. 1. ISSN 2075-5309. Available from: https://doi.org/10.3390/buildings14010279.
Detail
OPĚLA, Petr; WALEK, Josef and KOPECEK, Jaromir. Machine Learning Techniques in Predicting Hot Deformation Behavior of Metallic Materials. Online. CMES - Computer Modeling in Engineering and Sciences. 2024, Vol. 142, no. 1. ISSN 1526-1492. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85212550946&origin=resultslist.
Detail
ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; TOKARSKÝ, Jonáš; HEGER, Milan; ZIMNÝ, Ondřej; MATÝSEK, Dalibor; PEIKERTOVÁ, Pavlína; RITZ, Michal; WALEK, Josef and LEINWEBEROVÁ, Sára. Rheological behaviour of CaO-MgO-SiO2-Al2O3-B2O3 system with varying B2O3 content up to 30 wt% at basicity of 0.4. Ceramics International. 2024, Vol. 50, no. 1, p. 1389-1397. ISSN 0272-8842.
Detail
MIROSHNICHENKO, D.V.; SHMELTSER, K.O.; MYKHAILOVA, Iryna; KRAVCHENKO, S.O. and SOLOVIEV, E.L.. Specific electrical resistance as an indicator ordering of coke structure. Online. Chemistry, technology and application of substances. 2024, Vol. 7, no. 1, p. 78-85. ISSN 2617-7307. Available from: https://science.lpnu.ua/ctas.
Detail
ŠOFER, Michal; CIENCIALA, Jakub; ŠOFER, Pavel; PAŠKA, Zbyněk; FOJTÍK, František; FUSEK, Martin and CZERNEK, Pavel. Transverse cracking signal characterization in CFRP laminates using modal acoustic emission and digital image correlation techniques. Composites Science and Technology. 2024, Vol. 255, no. 255. ISSN 0266-3538.
Detail
RADKOVSKÝ, Filip; ZLÁMAL, František; VASKOVA, Iveta; BAŠISTOVÁ, Martina; LICHÝ, Petr; KIELAR, Šimon and SOCHA, Ladislav. Design and optimization of a castability test for copper alloys applied to plaster moulds. Online. Heliyon. 2024, Vol. 10, no. 11. ISSN 2405-8440. Available from: https://www.sciencedirect.com/science/article/pii/S2405844024079106?via%3Dihub.
Detail
WALEK, Josef; ADÉLA, Odehnalová; SNIEGOŇ, Michal; CHUDOBOVÁ, Lucie; CUPEK, Jiří; FRANTIŠEK, Vrána; PAVEL, Fila and MARTIN, Balcar. Studium termofyzikálních vlastností ocelí a strusek při zpracování technologií ESR. Hutnické listy. 2024, Vol. 77, no. 1-3, p. 10-16. ISSN 0018-8069.
Detail
KOCICH, Radim; KUNČICKÁ, Lenka; BENČ, Marek; WEISER, Adam and NÉMETH, Gergely. Corrosion behavior of selective laser melting-manufactured bio-applicable 316L stainless steel in ionized simulated body fluid. Online. International Journal of Bioprinting. 2024, Vol. 10, no. 1, p. 339-356. ISSN 2424-7723. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001143303900003.
Detail
DAS, Pradip; HALAMA, Radim; NATARAJAN, Ajay Vignesh; KHUTIA, Niloy; DEY, Partha Pratim; KUNČICKÁ, Lenka; HAJNYŠ, Jiří; KOCICH, Radim and SARI, Fatih. Constitutive modelling and damage prediction of AlSi10Mg alloy manufactured by SLM technology with emphasis on ratcheting in LCF regime. International journal of fatigue. 2024, Vol. 181, no. April, p. 108115. ISSN 0142-1123.
Detail
IZAK, Josef; BENČ, Marek; KUNČICKÁ, Lenka; OPĚLA, Petr and KOCICH, Radim. Influence of Imposed Strain on Weldability of Dievar Alloy. Online. MATERIALS. 2024, Vol. 17, no. 10. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001231392800001.
Detail
KOCICH, Radim; KUNČICKÁ, Lenka; KRAL, Petr and DVOŘÁK, Karel. Mechanical Behavior of Oxide Dispersion Strengthened Steel Directly Consolidated by Rotary Swaging. Online. Materials. 2024, Vol. 17, no. 19, p. 4831. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001334105500001.
Detail
WALEK, Josef; ODEHNALOVA, Adela and KOCICH, Radim. Analysis of Thermophysical Properties of Electro Slag Remelting and Evaluation of Metallographic Cleanliness of Steel. Online. Materials. 2024, Vol. 17, no. 18. ISSN 1996-1944. Available from: https://www.mdpi.com/1996-1944/17/18/4613.
Detail
IZÁK, Josef; STRUNZ, Pavel; LEVYTSKA, Olena; NÉMETH, Gergely; ŠAROUN, Jan; KOCICH, Radim; PAGÁČ, Marek and TUHARIN, Kostyantyn. Residual Stress Distribution in Dievar Tool Steel Bars Produced by Conventional Additive Manufacturing and Rotary Swaging Processes. Online. Materials. 2024, Vol. 17, no. 23, p. 2-22. ISSN 1996-1944. Available from: https://doi.org/10.3390/ma17235706.
Detail
KOCICH, Radim and KUNČICKÁ, Lenka. Crossing the limits of electric conductivity of copper by inducing nanotwinning via extreme plastic deformation at cryogenic conditions. Online. Materials characterization. 2024, Vol. 207, no. 207. ISSN 1044-5803. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001128556300001.
Detail
KUNČICKÁ, Lenka and KOCICH, Radim. High strain rate induced shear banding within additively manufactured AISI 316L. Materials letters. 2024, Vol. 363, no. květen 2024. ISSN 0167-577X.
Detail
KOCICH, Radim; KOPEČEK, J. and MAREK, Martin. Correlation of structure development and electric characteristics within high pressure torsion processed copper. Online. Materialwissenschaft und Werkstofftechnik. 2024, Vol. 55, no. 5, p. 579-587. ISSN 0933-5137. Available from: https://www.webofscience.com/wos/woscc/summary/61d3604f-8411-43fd-b551-5bb420ed71ca-0108c948e3/relevance/1.
Detail
KUNČICKÁ, Lenka and SVOBODA, J. Direct consolidation of an oxide dispersion strengthened alloy by hot rotary swaging. Online. Materialwissenschaft und Werkstofftechnik. 2024, Vol. 55, no. 5, p. 588-597. ISSN 0933-5137. Available from: https://onlinelibrary.wiley.com/doi/epdf/10.1002/mawe.202400023.
Detail
KUNČICKÁ, Lenka; WALEK, Josef and KOCICH, Radim. Microstructure Development of Powder-Based Cu Composite During High Shear Strain Processing. Online. Metals. 2024, Vol. 14, no. 12. ISSN 2075-4701. Available from: https://doi.org/10.3390/met14121331.
Detail
PIEPRZYCA, Jacek; MERDER, T; SATERNUS, M; TKADLEČKOVÁ, Markéta; CUPEK, Jiří and WALEK, Josef. MODELING RESEARCH ON LIMITATION OF TRANSITION ZONE DURING CONTINUOUS STEEL CASTING. Online. Metalurgija. 2024, Vol. 63, no. 1, p. 3-5. ISSN 0543-5846. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001057757200001.
Detail
ROZMUS-GÓRNIKOWSKA, Magdalena; KUSIŃSKI, Jan; CIENIEK, Lukasz; MORGIEL, Jerzy; LICHÝ, Petr and BAŠISTOVÁ, Martina. Correlation between the changes in microstructure and chemical composition on the surface layer of nickel superalloy after laser shock processing. Online. Optics and Laser Technology. 2024, Vol. 172, . ISSN 0030-3992. Available from: https://www.scopus.com/record/display.uri?origin=resultslist&eid=2-s2.0-85181938923.
Detail
PUSTĚJOVSKÁ, Pavlína; SIKORA, Michal; JURSOVÁ, Simona; PUSTĚJOVSKÁ, Kristýna and KARDAS, Edyta. Coke Substitution with Anthracite in Sintering Production. Online. Processes. 2024, Vol. 12, no. 3, p. 440. ISSN 2227-9717. Available from: https://www.mdpi.com/2227-9717/12/3/440.
Detail
KIELAR, Šimon. Rozdílné principy mísení a jejich vliv na vlastnosti bentonitové směsi. Slévárenství. 2024, no. 4-20224, p. 227-230. ISSN 0037-6825.
Detail
SNIEGOŇ, Michal; CHUDOBOVÁ, Lucie and CIESLAR, Lukáš. Optimalizace složení pánvové strusky za účelem efektivního odsíření oceli. Slévárenství. 2024, Vol. 2024, no. 1, p. 27-29. ISSN 0037-6825.
Detail
RADKOVSKÝ, Filip; BAŠISTOVÁ, Martina and LICHÁ, Ivana. Evaluation of the Effect of External Conditions During Crystallization and Solidification on the Final Structure of AlSi7Mg. Online. Archives of Foundry Engineering. 2023, Vol. 23, no. 1, p. 118-123. ISSN 1897-3310. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000957358400001.
Detail
BAŠISTOVÁ, Martina and LICHÝ, Petr. The Influence of Silica Sand Granulometry and Sorting Level on Thermal Expansion. Online. Archives of Foundry Engineering. 2023, Vol. 23, no. 3, p. 12-15. ISSN 1897-3310. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001037365600001.
Detail
KIELAR, Šimon; BAŠISTOVÁ, Martina and LICHÝ, Petr. Evaluation of mixing efficiency and how it affects the properties of the new green sand mixtures. Online. Archives of Foundry Engineering. 2023, Vol. 23, no. 3, p. 88-93. ISSN 1897-3310. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85175445854&origin=resultslist&sort=plf-f&src=s&sid=a027ae8f22eb8e25241762c4db122635&sot=b&sdt=b&s=AUTHOR-NAME%28Bašistová%29&sl=22&sessionSearchId=a027ae8f22eb8e25241762c4db122635.
Detail
SCHINDLER, Ivo; KAWULOK, Petr; KONEČNÁ, Kateřina; SAUER, Michal; NAVRÁTIL, Horymír; OPĚLA, Petr; KAWULOK, Rostislav and RUSZ, Stanislav. SIMULATION OF HOT CONTINUOUS ROLLING OF A PLAIN CARBON STEEL USING THE MAXSTRAIN II® MULTI-AXIS DEFORMATION SYSTEM. Online. Archives of Metallurgy and Materials. 2023, Vol. 68, no. 2, p. 741-747. ISSN 1733-3490. Available from: https://journals.pan.pl/dlibra/publication/142456/edition/127413/content.
Detail
LICHÁ, Ivana; BAŠISTOVÁ, Martina; LICHÝ, Petr; MERTA, Václav; RADKOVSKÝ, Filip and JEZIERSKI, Jacek. TECHNOLOGY OF PRODUCTION OF MOLD FILLING MATERIAL FOR SPECIFIC PURPOSES IN THE FIELD OF METALLIC FOAM CASTING. Online. Archives of Metallurgy and Materials. 2023, Vol. 68, no. 2, p. 757-763. ISSN 1733-3490. Available from: https://doi.org/10.24425/amm.2023.142458.
Detail
VODÁREK, Vlastimil; KUBOŇ, Zdeněk; VÁŇOVÁ, Petra; PALUPČÍKOVÁ, Renáta and LANGER, Svatopluk. Creep Resistance and Microstructure Evolution in HR3C-P92 Heterogeneous Welds. Defect and Diffusion Forum. 2023, Vol. 422, p. 51-56. ISSN 1012-0386.
Detail
DOSTÁL, Miroslav. Zpracování náročných jakostí ocelí pomocí vakuové metalurgie s cílem řízení obsahu vodíku výpočtovým modelem. Hutnické listy. 2023, Vol. 76, no. 1-3, p. 9-14. ISSN 0018-8069.
Detail
KOCICH, Radim and KUNČICKÁ, Lenka. Optimizing structure and properties of Al/Cu laminated conductors via severe shear strain. Online. Journal of Alloys and Compounds. 2023, Vol. 953, no. 25 August 2023. ISSN 0925-8388. Available from: https://www.sciencedirect.com/science/article/pii/S0925838823014275?via%3Dihub.
Detail
MAN, Licu; BERNHARD, Michael; KAWULOKOVÁ, Monika; WALEK, Josef; KERN, Maximilian; ZLÁ, Simona; PRESOLY, Peter; SMETANA, Bedřich; TKADLEČKOVÁ, Markéta; XU, Guang; KANG, You-Bae and BERNHARD, Christian. Decomposition of γ-Fe in 0.4C–1.8Si-2.8Mn-0.5Al steel during a continuous cooling process: A comparative study using in-situ HT-LSCM, DSC and dilatometry. Online. Journal of Materials Research and Technology. 2023, Vol. 24, no. květen-červen, p. 3534-3547. ISSN 2238-7854. Available from: https://www.sciencedirect.com/science/article/pii/S2238785423007020?pes=vor.
Detail
GREGER, Miroslav; KWARTENG, Oskar; PETRŽELA, Jiří and JUHAS, Miroslav. Progresivní technologie kování zdvihů pro zalomené hřídele. Online. Kovárenství. 2023, Vol. 78, no. březen, p. 11-17. ISSN 1213-9289. Available from: http://kovarenstvi.cz/cs/archiv/c78.html.
Detail
ŠMACH, Jiří; HALAMA, Radim; MAREK, Martin; ŠOFER, Michal; LIBOR, Kovář and PETR, Matušek. Two Contributions to Rolling Contact Fatigue Testing Considering Different Diameters of Rail and Wheel Discs. Online. Lubricants. 2023, Vol. 11, no. 12, p. 504. ISSN 2075-4442. Available from: https://www.mdpi.com/2075-4442/11/12/504/pdf?version=1701319966.
Detail
SAUER, Michal; FABIK, Richard; SCHINDLER, Ivo; KAWULOK, Petr; OPĚLA, Petr; KAWULOK, Rostislav; VODÁREK, Vlastimil and RUSZ, Stanislav. Analysis of the Microstructure Development of Nb-Microalloyed Steel during Rolling on a Heavy-Section Mill. Online. MATERIALS. 2023, Vol. 16, no. 1. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000910046300001.
Detail
BAŠISTOVÁ, Martina; RADKOVSKÝ, Filip; KROUPOVÁ, Ivana and LICHÝ, Petr. Dilatation of New Progressive Hybrid Sand and Its Effect on Surface Structure, Roughness, and Veining Creation within Grey Cast Iron. Online. MATERIALS. 2023, Vol. 16, no. 5. ISSN 1996-1944. Available from: https://www.mdpi.com/1996-1944/16/5/2004.
Detail
KOCICH, Radim. Optimizing Thermomechanical Processing of Bimetallic Laminates. Online. MATERIALS. 2023, Vol. 16, no. 9. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000987492800001.
Detail
KUNČICKÁ, Lenka and KOCICH, Radim. Effect of Stacking Sequence on Mechanical Properties and Microstructural Features within Al/Cu Laminates. Online. MATERIALS. 2023, Vol. 16, no. 19. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001081205800001.
Detail
SVOBODA, J.; KOCICH, Radim; GAMANOV, Š.; KUNČICKÁ, Lenka; LUPTÁKOVÁ, N. and DYMÁČEK, P.. Processing window for hot consolidation by rolling and rotary swaging of Fe-10Al-4Cr-4Y2O3 ODS nanocomposite. Online. MATERIALS TODAY COMMUNICATIONS. 2023, Vol. 34, no. Mar 2023. ISSN 2352-4928. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000990050100001.
Detail
SLÍVA, Aleš; SKACEL, Kamil; SIMHA MARTYNKOVÁ, Gražyna; BRÁZDA, Robert; BROŽOVÁ, Silvie and CIENCIALA, Samuel. STUDY OF MASS MOTION ON VIBRATING DEVICE: DESIGN AND PROCESS SIMULATION. Online. MM Science Journal. 2023, Vol. 2023, no. 2023, p. 6375-6380. ISSN 1803-1269. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000944184800001.
Detail
CANELO-YUBERO, D.; KOCICH, Radim; ŠAROUN, J. and STRUNZ, P.. Residual Stress Distribution in a Copper-Aluminum Multifilament Composite Fabricated by Rotary Swaging. Online. Materials. 2023, Vol. 16, no. 5. ISSN 1996-1944. Available from: https://www.mdpi.com/1996-1944/16/5/2102.
Detail
OPĚLA, Petr; BENČ, Marek; KOLOMY, Stepan; JAKUBEK, Zdeněk and BERANOVÁ, Denisa. High Cycle Fatigue Behaviour of 316L Stainless Steel Produced via Selective Laser Melting Method and Post Processed by Hot Rotary Swaging. Online. Materials. 2023, Vol. 16, no. 9. ISSN 1996-1944. Available from: https://www.mdpi.com/1996-1944/16/9/3400.
Detail
KOCICH, Radim; OPĚLA, Petr and MAREK, Martin. Influence of Structure Development on Performance of Copper Composites Processed via Intensive Plastic Deformation. Online. Materials. 2023, Vol. 16, no. 1-16. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001031159500001.
Detail
WANG, Zifang; ZHANG, Yunlan; LIOGAS, Konstantinos; CHEN, Jingwei; VAUGHAN, Gabin B.M.; KOCICH, Radim; KUNČICKÁ, Lenka; UZUN, Fatih; YOU, Zhong and KORSUNSKY, Alexander M.. In situ synchrotron X-ray diffraction analysis of two-way shape memory effect in Nitinol. Online. Materials Science and Engineering. A, Structural Materials : Properties, Microstructure and Processing. 2023, Vol. 878, no. 878. ISSN 0921-5093. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85161271457&origin=resultslist&sort=plf-f&src=s&st1=Kocich%2cR.&sid=47ce0576970abcf30bb26d9b99432999&sot=b&sdt=b&sl=23&s=AUTHOR-NAME%28Kocich%2c+R.%29&relpos=1&citeCnt=0&searchTerm=.
Detail
KOCICH, Radim; KUNČICKÁ, Lenka and BENČ, Marek. Development of microstructure and properties within oxide dispersion strengthened steel directly consolidated by hot rotary swaging. Online. Materials letters. 2023, Vol. 353, no. 353. ISSN 0167-577X. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001082221200001.
Detail
WALEK, Josef; TKADLEČKOVÁ, Markéta; VELIČKA, Marek; MACHŮ, Mario; CUPEK, Jiří; HUCZALA, Tomas; CIBULKA, Jiri; RŮŽIČKA, Jan and MICHALEK, Karel. Physical Experiments and Numerical Simulations of the Influence of Turbulence Inhibitors and the Position of Ladle Shroud on the Steel Flow in an Asymmetric Five-Strand Tundish. Online. Metals. 2023, Vol. 13, no. 11. ISSN 2075-4701. Available from: https://www.mdpi.com/2075-4701/13/11/1821.
Detail
NĚMEC, Josef; KUNČICKÁ, Lenka; OPĚLA, Petr and DVORAK, Karel. Determining Hot Deformation Behavior and Rheology Laws of Selected Austenitic Stainless Steels. Online. Metals. 2023, Vol. 13, no. 11. ISSN 2075-4701. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:001115917500001.
Detail
CUPEK, Jiří; WALEK, Josef; TKADLEČKOVÁ, Markéta; PIEPRZYCA, Jacek; MERDER, Tomáš and SATERNUS, Mariola. Optimization of the Steel Flow in the Two-Strand Tundish Using Different Geometry of Impact Pad. Journal Metalurgija. Online. Metalurgija. 2023, Vol. 62, no. 2, p. 179-182. ISSN 0543-5846. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85162054215&origin=SingleRecordEmailAlert&dgcid=raven_sc_search_en_us_email&txGid=8d3b830098f3e7ad39817774f5eff293.
Detail
CUPEK, Jiří; TKADLEČKOVÁ, Markéta; MERDER, Tomasz; WALEK, Josef; SATERNUS, Mariola and PIEPRZYCA, Jacek. COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSIS OF MEDIUM FLOW AND REMOVAL OF INCLUSIONS IN A TWO-STRAND TUNDISH. Online. Metalurgija. 2023, Vol. 62, no. 3-4, p. 335-338. ISSN 0543-5846. Available from: https://www.scopus.com/record/display.uri?origin=resultslist&eid=2-s2.0-85159709924.
Detail
PUSTĚJOVSKÁ, Pavlína; BILÍK, Jiří; JURSOVÁ, Simona; KARDAS, Edyta and KONSTANCIAK, Anna. Prediction of the Consumption of Raw Materials and Fuels for the Blast Furnace. Online. Processes. 2023, Vol. 11, no. 1, p. 1-10. ISSN 2227-9717. Available from: https://www.mdpi.com/2227-9717/11/1/79.
Detail
BROŽOVÁ, Silvie; BROŽ, Jiří and INGALDI, Manuela. Hydrome-metallurgical waste management: Turning metal-enriched waste into valuable resources. Online. Scientific Journals of the Maritime University of Szczecin - Zeszyty Naukowe Akademii Morskiej w Szczecinie. 2023, Vol. 75, no. 147, p. 107-113. ISSN 1733-8670. Available from: https://repository.am.szczecin.pl/handle/123456789/2793.
Detail
WOJNAROVÁ, Petra; RUSÍN, Jiří; BASINAS, Panagiotis; KOŠTEJN, Martin; NĚMEC, Josef; STANOVSKÝ, Petr; KIM, Albert S. and IZÁK, Pavel. Unveiling the potential of composite water-swollen spiral wound membrane for design of low-cost raw biogas purification. Online. Separation and Purification Technology. 2023, Vol. 326, no. -, p. 1-9. ISSN 1383-5866. Available from: https://doi.org/10.1016/j.seppur.2023.124783.
Detail
CUPEK, Jiří; BILKO, Roman and WALEK, Josef. Fyzikální a numerické modelování odstraňování nekovových vměstků v mezipánvi plynulého odlévání oceli. Online. Slévárenství. 2023, Vol. 4, no. 1. 12. 2023, p. 202-207. ISSN 0037-6825. Available from: https://www.casopis-slevarenstvi.cz/.
Detail
BROŽOVÁ, Silvie; DRÁPALA, Jaromír; BROŽ, Jiří and MACHÁČKOVÁ, Adéla. INNOVATIVE HYDROMETALLURGY FOR GALVANIC SLUDGE SUSTAINABLE RECOVERY. Online. System Safety: Human - Technical Facility - Environment. 2023, Vol. 5, no. 1, p. 45-56. ISBN 978-83-67405-70-6. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85182929657&origin=resultslist.
Detail
KUNČICKÁ, Lenka; KOCICH, Radim; NÉMETH, Gergely; DVOŘÁK, Karel and PAGÁČ, Marek. Effect of post process shear straining on structure and mechanical properties of 316 L stainless steel manufactured via powder bed fusion. Additive Manufacturing. 2022, Vol. 59, no. November, p. 103128. ISSN 2214-8604.
Detail
BAŠISTOVÁ, Martina; KIELAR, Šimon and LICHÝ, Petr. Mulling and its effect on the properties of sand-water-bentonite moulding mixture. Online. Archives of Foundry Engineering. 2022, Vol. 22, no. 3, p. 107-112. ISSN 1897-3310. Available from: https://www.journals.pan.pl/dlibra/results?q=Gawronov%C3%A1&action=SimpleSearchAction&mdirids=&type=-6&startstr=_all&p=0.
Detail
OBZINA, Tomáš; MERTA, Václav; RYGEL, Jan; LICHÝ, Petr and DROBÍKOVÁ, Klára. Evaluation of Collapsibility of Selected Core Systems. Online. Archives of Foundry Engineering. 2022, Vol. 22, no. 1, p. 48-52. ISSN 1897-3310. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000780016500007.
Detail
WALEK, Josef; MICHALEK, Karel and TKADLEČKOVÁ, Markéta. The Influence of Optimization Parameters on the Efficiency of Aluminium Melt Refining by using Physical Modelling. Online. Archives of Foundry Engineering. 2022, Vol. 22, no. 3, p. 60-66. ISSN 1897-3310. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000859076500001.
Detail
MALCHARCZIKOVÁ, Jitka; SKOTNICOVÁ, Kateřina; KAWULOK, Petr; KAWULOK, Rostislav; SZURMAN, Ivo and RŮŽIČKA, Jana. Preparation and Properties of Directionally Solidified Ni-Al Based Alloys Modified by Molybdenum. Online. Crystals. 2022, Vol. 12, no. 2. ISSN 2073-4352. Available from: https://www.mdpi.com/2073-4352/12/2/215.
Detail
RADKOVSKÝ, Filip; GAWRONOVÁ, Martina; VÁLKOVÁ, Nela; LICHÝ, Petr; KROUPOVÁ, Ivana; MERTA, Václav and NGUYENOVÁ, I.. Determination of linear expansion of AlSi10Mg aluminium alloy depending on external conditions during solidification. Online. HELIYON. 2022, Vol. 8, no. 11. ISSN 2405-8440. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85141721430&origin=resultslist&sort=plf-f&src=s&st1=Lichý%2cP.&sid=067c640ecbb2e14323250e3892cf6a28&sot=b&sdt=b&sl=22&s=AUTHOR-NAME%28Lichý%2c+P.%29&relpos=0&citeCnt=0&searchTerm=.
Detail
BAŠISTOVÁ, Martina; LICHÝ, Petr; KROUPOVÁ, Ivana; OBZINA, Tomáš; BEŇO, Jaroslav; NGUYENOVÁ, Isabel; MERTA, Václav; JEZIERSKI, Jan and RADKOVSKÝ, Filip. Evaluation of additive manufacturing of sand cores in terms of the resulting surface roughness. Online. Heliyon. 2022, Vol. 8, no. 10. ISSN 2405-8440. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85139298504&origin=resultslist&sort=plf-f&src=s&st1=Obzina%2cT.&sid=a21334d708195a258eaac38ecbbe864c&sot=b&sdt=b&sl=23&s=AUTHOR-NAME%28Obzina%2c+T.%29&relpos=0&citeCnt=0&searchTerm=.
Detail
SCHINDLER, Ivo; KAWULOK, Petr; OPĚLA, Petr; KAWULOK, Rostislav; KONEČNÁ, Kateřina; KONDERLA, Michal; RUSZ, Stanislav; FABÍK, Richard and NĚMEC, Josef. Laboratorní simulace spojitého válcování za tepla střídavou deformací tlakem ve dvou směrech. Hutnické listy. 2022, Vol. 75, no. 3-4, p. 17-22. ISSN 0018-8069.
Detail
FABÍK, Richard; TOMÁŠ, Kubina; MICHAL, Sauer; SCHINDLER, Ivo and RUSZ, Stanislav. Fyzikální a matematická simulace spojitého válcování a ochlazování HSLA oceli. Online. Hutnické listy. 2022, Vol. 75, no. 5-6, p. 32-40. ISSN 0018-8069. Available from: http://www.hutnickelisty.cz/aktualni-cislo-2/fyzikalni-a-matematicka-simulace-spojiteho-valcovani-a-ochlazovani-hsla-oceli/.
Detail
ŘEHÁČKOVÁ, Lenka; NOVÁK, Vlastimil; VÁŇOVÁ, Petra; MATÝSEK, Dalibor; TKADLEČKOVÁ, Markéta; KONEČNÁ, Kateřina; SNIEGOŇ, Michal; SMETANA, Bedřich; ROSYPALOVÁ, Silvie; KAWULOKOVÁ, Monika and DROZDOVÁ, Ľubomíra. Interfacial phenomena between alumina substrate and nickel containing low-alloy steel. Journal of Alloys and Compounds. 2022, Vol. 900, no. April. ISSN 0925-8388.
Detail
GREGER, Miroslav; KWARTENG, Oskar and KANDER, Ladislav. Progresivní technologie kování výkovků pro JE. Online. Kovárenství. 2022, Vol. 77, no. listopad, p. 10-15. ISSN 1213-9289. Available from: http://kovarenstvi.cz/cs/archiv/c77.html.
Detail
KAWULOK, Rostislav; PASEČNÝ, Daniel; KAWULOK, Petr; RUSZ, Stanislav; SCHINDLER, Ivo and OPĚLA, Petr. Postup přípravy kompozitní oceli pomocí válcování za tepla. Kovárenství. 2022, Vol. 77, p. 16-21. ISSN 1213-9289.
Detail
GREGER, Miroslav; KWARTENG, Oskar; KAWULOK, Rostislav and KANDER, Ladislav. Kování a tepelné zpracování Ti a slitin Ti. Online. Kovárenství. 2022, Vol. 75, no. březen, p. 18-25. ISSN 1213-9289. Available from: http://kovarenstvi.cz/cs/archiv/c75.html.
Detail
KAWULOK, Rostislav; SCHINDLER, Ivo; KAWULOK, Petr; OPĚLA, Petr; OČENÁŠEK, Vladivoj; RUSZ, Stanislav; SAUER, Michal and NĚMEC, Josef. Popis deformačního chování hliníkové slitiny 6005A za tepla. Kovárenství. 2022, no. 76, p. 19-24. ISSN 1213-9289.
Detail
GREGER, Miroslav; KWARTENG, Oskar; RUSZ, Stanislav and ŠVEC, Jiří. Výroba výkovků a tepelné zpracování ocelových válců. Online. Kovárenství. 2022, Vol. 76, no. červen, p. 32-38. ISSN 1213-9289. Available from: http://kovarenstvi.cz/cs/archiv/c76.html.
Detail
RADKOVSKÝ, Filip; BAŠISTOVÁ, Martina; MERTA, Václav; LICHÝ, Petr; KROUPOVÁ, Ivana; NGUYENOVÁ, Isabel; KIELAR, Šimon; FOLTA, Martin; BRADIC, Josef and KOCICH, Radim. Effect of the Composition of Hybrid Sands on the Change in Thermal Expansion. Online. MATERIALS. 2022, Vol. 15, no. 17. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000851805200001.
Detail
NOVÁK, Vlastimil; ŘEHÁČKOVÁ, Lenka; VÁŇOVÁ, Petra; SNIEGOŇ, Michal; MATÝSEK, Dalibor; KONEČNÁ, Kateřina; SMETANA, Bedřich; ROSYPALOVÁ, Silvie; TKADLEČKOVÁ, Markéta; DROZDOVÁ, Ľubomíra and KLUS, Petr. The Effect of Trace Oxygen Addition on the Interface Behavior of Low-Alloy Steel. Online. Materials. 2022, Vol. 15, no. 4. ISSN 1996-1944. Available from: https://www.mdpi.com/1996-1944/15/4/1592.
Detail
KUNČICKÁ, Lenka; KOCICH, Radim; BENČ, Marek and DVOŘÁK, Jiří. Affecting Microstructure and Properties of Additively Manufactured AISI 316L Steel by Rotary Swaging. Online. Materials. 2022, Vol. 15, no. 18, p. 6291. ISSN 1996-1944. Available from: https://www.mdpi.com/1996-1944/15/18/6291/htm.
Detail
ČECH BARABASZOVÁ, Karla; SLÍVA, Aleš; KRATOŠOVÁ, Gabriela; HOLEŠOVÁ, Sylva; VOLODARSKAJA, Anastasia; CETINKAYA, Tugrul; BROŽOVÁ, Silvie; KOZUBEK, Libor and SIMHA MARTYNKOVÁ, Gražyna. Phase Transformation after Heat Treatment of Cr-Ni Stainless Steel Powder for 3D Printing. Online. Materials. 2022, Vol. 15, no. 15. ISSN 1996-1944. Available from: https://www.mdpi.com/1996-1944/15/15/5343.
Detail
OPĚLA, Petr; SCHINDLER, Ivo; KAWULOK, Petr; KAWULOK, Rostislav; RUSZ, Stanislav and SAUER, Michal. Shallow and deep learning of an artificial neural network model describing a hot flow stress Evolution: A comparative study. Online. Materials and Design. 2022, Vol. 220, no. 110880. ISSN 0264-1275. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000861662000001.
Detail
KUNČICKÁ, Lenka; KOCICH, Radim and JAMBOR, Michal. Shear strain induced recrystallization/recovery phenomena within rotary swaged Al/Cu composite conductors. Online. Materials characterization. 2022, Vol. 194, no. December. ISSN 1044-5803. Available from: https://www.sciencedirect.com/science/article/pii/S1044580322006817?via%3Dihub.
Detail
KUNCICKA, Lenka and KOCICH, Radim. Effect of activated slip systems on dynamic recrystallization during rotary swaging of electro-conductive Al-Cu composites. Online. Materials letters. 2022, Vol. 321, no. 132436. ISSN 0167-577X. Available from: https://www.sciencedirect.com/science/article/pii/S0167577X22007893#ak005.
Detail
KROUPOVÁ, Ivana; GAWRONOVÁ, Martina; LICHÝ, Petr; MERTA, Václav and RADKOVSKÝ, Filip. Use of Molding Mixtures for the Production of Cast Porous Metals. Online. Metals. 2022, Vol. 12, no. 7. ISSN 2075-4701. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000833879200001.
Detail
DRÁPALA, Jaromír; RIGOULET, Hana; BROŽOVÁ, Silvie; MALCHARCZIKOVÁ, Jitka; LANGOVÁ, Šárka; VONTOROVÁ, Jiřina; NÉTEK, Václav; KUBAC, Jaroslav and JANACEK, Dominik. Processing of Metal Waste-Sludge from the Galvanizing Plants. Online. Metals. 2022, Vol. 12, no. 11. ISSN 2075-4701. Available from: https://www.mdpi.com/2075-4701/12/11/1947.
Detail
LISIŃSKA, Magdalena; GAJDA, B.; SATERNUS, Mariola; BROŽOVÁ, Silvie; WOJTAL, T. and RZELEWSKA-PIEKUT, Martyna. THE EFFECT OF ORGANIC ACIDS AS LEACHING AGENTS FOR HYDROMETALLURGICAL RECOVERY OF METALS FROM PCBs. Online. Metalurgija. 2022, Vol. 61, no. 3-4, p. 609-612. ISSN 0543-5846. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000802273300009.
Detail
MERDER, Tomáš; PIEPRZYCA, Jacek; SATERNUS, Mariola and TKADLEČKOVÁ, Markéta. The interaction of the argon curtain at the interface  Metal-slag in a tundish. Online. Metalurgija. 2022, Vol. 61, no. 3-4, p. 585-588. ISSN 0543-5846. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000802273300002.
Detail
BAŠISTOVÁ, Martina and KIELAR, Šimon. Zhodnocení účinnosti mísičů a stanovení efektivní doby mísení. Slévárenství. 2022, no. 4/2022, p. 195-200. ISSN 0037-6825.
Detail
FOLEGA, Piotr; BURCHART, Dorota; MARZEC, Pawel; JURSOVÁ, Simona and PUSTĚJOVSKÁ, Pavlína. Potential environmental life cycle impacts of fuel cell electric vehicles powered by hydrogen produced from Polish coke oven gas. Online. Transport Problems. 2022, Vol. 17, no. 1, p. 151-161. ISSN 1896-0596. Available from: https://www.scopus.com/record/display.uri?eid=2-s2.0-85128262435&origin=resultslist&sort=plf-f&src=s&st1=jursova+s*&sid=ff6e5e6a73c749084807bb76095ac68c&sot=b&sdt=b&sl=23&s=AUTHOR-NAME%28jursova+s*%29&relpos=0&citeCnt=0&searchTerm=&featureToggles=FEATURE_NEW_DOC_DETAILS_EXPORT:1.
Detail
STRUNZ, P; KOCICH, Radim; BERAN, P; KUNČICKÁ, Lenka; CANELO-YUBERO, D and HERVOCHES, Ch. Microstrain and texture in rotary swaged W-Ni-Co pseudoalloy. Online. Acta Crystallographica A-Foundation and Advances. 2021, Vol. 77, no. Supplement S, p. C847-C847. ISSN 2053-2733. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000761714400824.
Detail
MERTA, Václav; BEŇO, Jaroslav; OBZINA, Tomáš; RADKOVSKÝ, Filip; KROUPOVÁ, Ivana; LICHÝ, Petr; FOLTA, Martin; JANOVSKÁ, Kamila; NGUYENOVA, Isabel and DOSTÁL, Miroslav. Innovative Inorganic Binder Systems for the Production of Cores for Non-Ferrous Metal Alloys Reflecting the Product Quality Requirements. Online. Metals. 2021, Vol. 11, no. 5. ISSN 2075-4701. Available from: https://www.mdpi.com/2075-4701/11/5/733.
Detail
STRUNZ, Pavel; KUNČICKÁ, Lenka; KOCICH, Radim; FARKAS, Gergely; MACHÁČKOVÁ, Adéla and RYUKHTIN, Vasyl. Neutron Diffraction Study of Ti-Zr Alloy Microstructure Evolution during Annealing after Severe Plastic Deformation. Online. Journal of Surface Investigation. 2020, Vol. 14, no. SUPPL 1 / Supplement 1, p. S225-S230. ISSN 1027-4510. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000578828100047.
Detail
GREGER, Miroslav; KWARTENG, Oskar; ŽŮREK, Ondřej; MAZIARZ, Wojciech and ROGAL, Lukasz. Volné kování podélných výkovků na radiálních kovacích strojích a hydraulických lisech. Kovárenství. 2020, Vol. 72, no. říjen, p. 14-19. ISSN 1213-9289.
Detail
RŮŽIČKA, Jan; ČEJKOVÁ, Petra; KŘÍŽ, Antonín; BALCAR, Martin; TKADLEČKOVÁ, Markéta and STUDECKÝ, Tomáš. Austenitic steels with added boron for the production of components for the storage of spent nuclear fuel. Kovárenství. 2020, Vol. 72, no. říjen 2020, p. 26-27. ISSN 1213-9289.
Detail
GREGER, Miroslav; KWARTENG, Oskar; MAZIARZ, Wojciech and ROGAL, Lukasz. Technologický postup kování podélných výkovků ze slitin Inconel. Online. Kovárenství. 2020, Vol. 71, no. březen, p. 8-14. ISSN 1213-9289. Available from: http://kovarenstvi.cz/cs/archiv/c71.html.
Detail
KOCICH, Radim. Deformation behavior of Al/Cu clad composite during twist channel angular pressing. Online. Materials. 2020, Vol. 13, no. 18. ISSN 1996-1944. Available from: https://www.webofscience.com/wos/woscc/full-record/WOS:000580900100001.
Detail
GREGER, Miroslav; KWARTENG, Oskar; KAWULOK, Rostislav and ŽŮREK, Ondřej. Kování titanu na radiálním kovacím stroji. Online. Kovárenství. 2019, Vol. 68, no. duben, p. 22–27. ISSN 1213-9289. Available from: http://kovarenstvi.cz/cs/archiv/c68.html.
Detail
MÁLEK, Jaroslav; ZÝKA, Jiří; LUKÁČ, František; VILÉMOVÁ, Monika; VLASÁK, Tomáš; ČÍŽEK, Jakub; MELIKHOVA, O.; MACHÁČKOVÁ, Adéla and KIM, Hyoung-Seop. The effect of processing route on properties of HfNbTaTiZr high entropy alloy. Online. Materials. 2019, Vol. 12, no. 23. ISSN 1996-1944. Available from: https://doi.org/10.3390/ma12234022.
Detail